---

yaml
---
r: 355486
b: refs/heads/master
c: 1a81dbd
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: af70fdc947dbe835acc26c6ee9e8e930f38935f8
+refs/heads/master: 1a81dbde4df4e2fd94a5424b25bc78c19f446691

trunk/Documentation/DocBook/media/v4l/driver.xml

@@ -116,15 +116,15 @@ my_suspend              (struct pci_dev *               pci_dev,
 	return 0; /* a negative value on error, 0 on success. */
 }
 
-static void
+static void __devexit
 my_remove               (struct pci_dev *               pci_dev)
 {
 	my_device *my = pci_get_drvdata (pci_dev);
 
 	/* Describe me. */
 }
 
-static int
+static int __devinit
 my_probe                (struct pci_dev *               pci_dev,
 			 const struct pci_device_id *   pci_id)
 {
@@ -157,7 +157,7 @@ my_pci_driver = {
 	.id_table = my_pci_device_ids,
 
 	.probe    = my_probe,
-	.remove   = my_remove,
+	.remove   = __devexit_p (my_remove),
 
 	/* Power management functions. */
 	.suspend  = my_suspend,

trunk/Documentation/PCI/pci-iov-howto.txt

@@ -76,7 +76,7 @@ To notify SR-IOV core of Virtual Function Migration:
 
 Following piece of code illustrates the usage of the SR-IOV API.
 
-static int dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	pci_enable_sriov(dev, NR_VIRTFN);
 
@@ -85,7 +85,7 @@ static int dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	return 0;
 }
 
-static void dev_remove(struct pci_dev *dev)
+static void __devexit dev_remove(struct pci_dev *dev)
 {
 	pci_disable_sriov(dev);
 
@@ -131,7 +131,7 @@ static struct pci_driver dev_driver = {
 	.name =		"SR-IOV Physical Function driver",
 	.id_table =	dev_id_table,
 	.probe =	dev_probe,
-	.remove =	dev_remove,
+	.remove =	__devexit_p(dev_remove),
 	.suspend =	dev_suspend,
 	.resume =	dev_resume,
 	.shutdown =	dev_shutdown,

trunk/Documentation/PCI/pci.txt

@@ -183,13 +183,33 @@ Please mark the initialization and cleanup functions where appropriate
 			initializes.
 	__exit		Exit code. Ignored for non-modular drivers.
 
+
+	__devinit	Device initialization code.
+			Identical to __init if the kernel is not compiled
+			with CONFIG_HOTPLUG, normal function otherwise.
+	__devexit	The same for __exit.
+
 Tips on when/where to use the above attributes:
 	o The module_init()/module_exit() functions (and all
 	  initialization functions called _only_ from these)
 	  should be marked __init/__exit.
 
 	o Do not mark the struct pci_driver.
 
+	o The ID table array should be marked __devinitconst; this is done
+	  automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE().
+
+	o The probe() and remove() functions should be marked __devinit
+	  and __devexit respectively.  All initialization functions
+	  exclusively called by the probe() routine, can be marked __devinit.
+	  Ditto for remove() and __devexit.
+
+	o If mydriver_remove() is marked with __devexit(), then all address
+	  references to mydriver_remove must use __devexit_p(mydriver_remove)
+	  (in the struct pci_driver declaration for example).
+	  __devexit_p() will generate the function name _or_ NULL if the
+	  function will be discarded.  For an example, see drivers/net/tg3.c.
+
 	o Do NOT mark a function if you are not sure which mark to use.
 	  Better to not mark the function than mark the function wrong.
 

trunk/Documentation/acpi/enumeration.txt

@@ -185,7 +185,7 @@ input driver:
 			.acpi_match_table  ACPI_PTR(mpu3050_acpi_match),
 		},
 		.probe		= mpu3050_probe,
-		.remove		= mpu3050_remove,
+		.remove		= __devexit_p(mpu3050_remove),
 		.id_table	= mpu3050_ids,
 	};
 

trunk/Documentation/devicetree/bindings/arm/sirf.txt

@@ -1,9 +1,3 @@
-CSR SiRFprimaII and SiRFmarco device tree bindings.
-========================================
-
+prima2 "cb" evaluation board
 Required root node properties:
-    - compatible:
-    - "sirf,prima2-cb" : prima2 "cb" evaluation board
-    - "sirf,marco-cb" : marco "cb" evaluation board
-    - "sirf,prima2" : prima2 device based board
-    - "sirf,marco" : marco device based board
+    - compatible = "sirf,prima2-cb", "sirf,prima2";

trunk/Documentation/devicetree/bindings/arm/vt8500.txt

@@ -12,11 +12,3 @@ compatible = "wm,wm8505";
 Boards with the Wondermedia WM8650 SoC shall have the following properties:
 Required root node property:
 compatible = "wm,wm8650";
-
-Boards with the Wondermedia WM8750 SoC shall have the following properties:
-Required root node property:
-compatible = "wm,wm8750";
-
-Boards with the Wondermedia WM8850 SoC shall have the following properties:
-Required root node property:
-compatible = "wm,wm8850";

trunk/Documentation/devicetree/bindings/clock/imx23-clock.txt

@@ -60,6 +60,11 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx23-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
+	clock-output-names =
+		...
+		"uart",		/* 32 */
+		...
+		"end_of_list";
 };
 
 auart0: serial@8006c000 {

trunk/Documentation/devicetree/bindings/clock/imx25-clock.txt

@@ -146,6 +146,10 @@ clks: ccm@53f80000 {
 	compatible = "fsl,imx25-ccm";
 	reg = <0x53f80000 0x4000>;
 	interrupts = <31>;
+	clock-output-names = ...
+			"uart_ipg",
+			"uart_serial",
+			...;
 };
 
 uart1: serial@43f90000 {

trunk/Documentation/devicetree/bindings/clock/imx28-clock.txt

@@ -83,6 +83,11 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx28-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
+	clock-output-names =
+		...
+		"uart",		/* 45 */
+		...
+		"end_of_list";
 };
 
 auart0: serial@8006a000 {

trunk/Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -211,6 +211,10 @@ clks: ccm@020c4000 {
 	reg = <0x020c4000 0x4000>;
 	interrupts = <0 87 0x04 0 88 0x04>;
 	#clock-cells = <1>;
+	clock-output-names = ...
+			     "uart_ipg",
+			     "uart_serial",
+			     ...;
 };
 
 uart1: serial@02020000 {

trunk/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt

@@ -1,19 +1,4 @@
-Driver a GPIO line that can be used to turn the power off.
-
-The driver supports both level triggered and edge triggered power off.
-At driver load time, the driver will request the given gpio line and
-install a pm_power_off handler. If the optional properties 'input' is
-not found, the GPIO line will be driven in the inactive
-state. Otherwise its configured as an input.
-
-When the pm_power_off is called, the gpio is configured as an output,
-and drive active, so triggering a level triggered power off
-condition. This will also cause an inactive->active edge condition, so
-triggering positive edge triggered power off. After a delay of 100ms,
-the GPIO is set to inactive, thus causing an active->inactive edge,
-triggering negative edge triggered power off. After another 100ms
-delay the GPIO is driver active again. If the power is still on and
-the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
+GPIO line that should be set high/low to power off a device
 
 Required properties:
 - compatible : should be "gpio-poweroff".
@@ -28,9 +13,10 @@ Optional properties:
   property is not specified, the GPIO is initialized as an output in its
   inactive state.
 
+
 Examples:
 
 gpio-poweroff {
 	compatible = "gpio-poweroff";
-	gpios = <&gpio 4 0>;
+	gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
 };

trunk/Documentation/i2c/instantiating-devices

@@ -91,7 +91,7 @@ Example (from the nxp OHCI driver):
 
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
 
-static int usb_hcd_nxp_probe(struct platform_device *pdev)
+static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
 {
 	(...)
 	struct i2c_adapter *i2c_adap;

trunk/Documentation/networking/ip-sysctl.txt

@@ -36,7 +36,7 @@ neigh/default/unres_qlen_bytes - INTEGER
 	The maximum number of bytes which may be used by packets
 	queued for each	unresolved address by other network layers.
 	(added in linux 3.3)
-	Setting negative value is meaningless and will return error.
+	Seting negative value is meaningless and will retrun error.
 	Default: 65536 Bytes(64KB)
 
 neigh/default/unres_qlen - INTEGER
@@ -215,7 +215,7 @@ tcp_ecn - INTEGER
 	Possible values are:
 		0 Disable ECN.  Neither initiate nor accept ECN.
 		1 Always request ECN on outgoing connection attempts.
-		2 Enable ECN when requested by incoming connections
+		2 Enable ECN when requested by incomming connections
 		  but do not request ECN on outgoing connections.
 	Default: 2
 
@@ -503,7 +503,7 @@ tcp_fastopen - INTEGER
 tcp_syn_retries - INTEGER
 	Number of times initial SYNs for an active TCP connection attempt
 	will be retransmitted. Should not be higher than 255. Default value
-	is 6, which corresponds to 63seconds till the last retransmission
+	is 6, which corresponds to 63seconds till the last restransmission
 	with the current initial RTO of 1second. With this the final timeout
 	for an active TCP connection attempt will happen after 127seconds.
 
@@ -1331,12 +1331,6 @@ force_tllao - BOOLEAN
 	race condition where the sender deletes the cached link-layer address
 	prior to receiving a response to a previous solicitation."
 
-ndisc_notify - BOOLEAN
-	Define mode for notification of address and device changes.
-	0 - (default): do nothing
-	1 - Generate unsolicited neighbour advertisements when device is brought
-	    up or hardware address changes.
-
 icmp/*:
 ratelimit - INTEGER
 	Limit the maximal rates for sending ICMPv6 packets.
@@ -1536,7 +1530,7 @@ cookie_hmac_alg - STRING
 	* sha1
 	* none
 	Ability to assign md5 or sha1 as the selected alg is predicated on the
-	configuration of those algorithms at build time (CONFIG_CRYPTO_MD5 and
+	configuarion of those algorithms at build time (CONFIG_CRYPTO_MD5 and
 	CONFIG_CRYPTO_SHA1).
 
 	Default: Dependent on configuration.  MD5 if available, else SHA1 if
@@ -1554,7 +1548,7 @@ rcvbuf_policy - INTEGER
 	blocking.
 
 	1: rcvbuf space is per association
-	0: rcvbuf space is per socket
+	0: recbuf space is per socket
 
 	Default: 0
 

trunk/Documentation/power/runtime_pm.txt

@@ -642,13 +642,12 @@ out the following operations:
   * During system suspend it calls pm_runtime_get_noresume() and
     pm_runtime_barrier() for every device right before executing the
     subsystem-level .suspend() callback for it.  In addition to that it calls
-    __pm_runtime_disable() with 'false' as the second argument for every device
-    right before executing the subsystem-level .suspend_late() callback for it.
+    pm_runtime_disable() for every device right after executing the
+    subsystem-level .suspend() callback for it.
 
   * During system resume it calls pm_runtime_enable() and pm_runtime_put_sync()
-    for every device right after executing the subsystem-level .resume_early()
-    callback and right after executing the subsystem-level .resume() callback
-    for it, respectively.
+    for every device right before and right after executing the subsystem-level
+    .resume() callback for it, respectively.
 
 7. Generic subsystem callbacks
 

trunk/Documentation/rpmsg.txt

@@ -236,7 +236,7 @@ static int rpmsg_sample_probe(struct rpmsg_channel *rpdev)
 	return 0;
 }
 
-static void rpmsg_sample_remove(struct rpmsg_channel *rpdev)
+static void __devexit rpmsg_sample_remove(struct rpmsg_channel *rpdev)
 {
 	dev_info(&rpdev->dev, "rpmsg sample client driver is removed\n");
 }
@@ -253,7 +253,7 @@ static struct rpmsg_driver rpmsg_sample_client = {
 	.id_table	= rpmsg_driver_sample_id_table,
 	.probe		= rpmsg_sample_probe,
 	.callback	= rpmsg_sample_cb,
-	.remove		= rpmsg_sample_remove,
+	.remove		= __devexit_p(rpmsg_sample_remove),
 };
 
 static int __init init(void)

trunk/Documentation/spi/spi-summary

@@ -345,7 +345,7 @@ SPI protocol drivers somewhat resemble platform device drivers:
 		},
 
 		.probe		= CHIP_probe,
-		.remove		= CHIP_remove,
+		.remove		= __devexit_p(CHIP_remove),
 		.suspend	= CHIP_suspend,
 		.resume		= CHIP_resume,
 	};
@@ -355,7 +355,7 @@ device whose board_info gave a modalias of "CHIP".  Your probe() code
 might look like this unless you're creating a device which is managing
 a bus (appearing under /sys/class/spi_master).
 
-	static int CHIP_probe(struct spi_device *spi)
+	static int __devinit CHIP_probe(struct spi_device *spi)
 	{
 		struct CHIP			*chip;
 		struct CHIP_platform_data	*pdata;