---

yaml
---
r: 354551
b: refs/heads/master
c: 6a099c6
h: refs/heads/master
i:
  354549: c57af2b
  354547: 81c6a9e
  354543: 4e6f6ee
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 102ee001912f67a7701f26a56ef2bcf84fc78028
+refs/heads/master: 6a099c63650e50ebf7d1259b859a3d230aec4207

trunk/drivers/usb/misc/Kconfig

@@ -250,3 +250,9 @@ config USB_EZUSB_FX2
 	help
 	  Say Y here if you need EZUSB device support.
 	  (Cypress FX/FX2/FX2LP microcontrollers)
+
+config USB_HSIC_USB3503
+       tristate "USB3503 HSIC to USB20 Driver"
+       depends on I2C
+       help
+         This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.

trunk/drivers/usb/misc/Makefile

@@ -26,5 +26,6 @@ obj-$(CONFIG_USB_TRANCEVIBRATOR)	+= trancevibrator.o
 obj-$(CONFIG_USB_USS720)		+= uss720.o
 obj-$(CONFIG_USB_SEVSEG)		+= usbsevseg.o
 obj-$(CONFIG_USB_YUREX)			+= yurex.o
+obj-$(CONFIG_USB_HSIC_USB3503)		+= usb3503.o
 
 obj-$(CONFIG_USB_SISUSBVGA)		+= sisusbvga/

trunk/drivers/usb/misc/usb3503.c

@@ -0,0 +1,303 @@
+/*
+ * Driver for SMSC USB3503 USB 2.0 hub controller driver
+ *
+ * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb3503.h>
+
+#define USB3503_VIDL		0x00
+#define USB3503_VIDM		0x01
+#define USB3503_PIDL		0x02
+#define USB3503_PIDM		0x03
+#define USB3503_DIDL		0x04
+#define USB3503_DIDM		0x05
+
+#define USB3503_CFG1		0x06
+#define USB3503_SELF_BUS_PWR	(1 << 7)
+
+#define USB3503_CFG2		0x07
+#define USB3503_CFG3		0x08
+#define USB3503_NRD		0x09
+
+#define USB3503_PDS		0x0a
+#define USB3503_PORT1		(1 << 1)
+#define USB3503_PORT2		(1 << 2)
+#define USB3503_PORT3		(1 << 3)
+
+#define USB3503_SP_ILOCK	0xe7
+#define USB3503_SPILOCK_CONNECT	(1 << 1)
+#define USB3503_SPILOCK_CONFIG	(1 << 0)
+
+#define USB3503_CFGP		0xee
+#define USB3503_CLKSUSP		(1 << 7)
+
+struct usb3503 {
+	enum usb3503_mode	mode;
+	struct i2c_client	*client;
+	int	gpio_intn;
+	int	gpio_reset;
+	int	gpio_connect;
+};
+
+static int usb3503_write_register(struct i2c_client *client,
+		char reg, char data)
+{
+	return i2c_smbus_write_byte_data(client, reg, data);
+}
+
+static int usb3503_read_register(struct i2c_client *client, char reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int usb3503_set_bits(struct i2c_client *client, char reg, char req)
+{
+	int err;
+
+	err = usb3503_read_register(client, reg);
+	if (err < 0)
+		return err;
+
+	err = usb3503_write_register(client, reg, err | req);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int usb3503_clear_bits(struct i2c_client *client, char reg, char req)
+{
+	int err;
+
+	err = usb3503_read_register(client, reg);
+	if (err < 0)
+		return err;
+
+	err = usb3503_write_register(client, reg, err & ~req);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int usb3503_reset(int gpio_reset, int state)
+{
+	if (gpio_is_valid(gpio_reset))
+		gpio_set_value(gpio_reset, state);
+
+	/* Wait RefClk when RESET_N is released, otherwise Hub will
+	 * not transition to Hub Communication Stage.
+	 */
+	if (state)
+		msleep(100);
+
+	return 0;
+}
+
+static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
+{
+	struct i2c_client *i2c = hub->client;
+	int err = 0;
+
+	switch (mode) {
+	case USB3503_MODE_HUB:
+		usb3503_reset(hub->gpio_reset, 1);
+
+		/* SP_ILOCK: set connect_n, config_n for config */
+		err = usb3503_write_register(i2c, USB3503_SP_ILOCK,
+				(USB3503_SPILOCK_CONNECT
+				 | USB3503_SPILOCK_CONFIG));
+		if (err < 0) {
+			dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err);
+			goto err_hubmode;
+		}
+
+		/* PDS : Port2,3 Disable For Self Powered Operation */
+		err = usb3503_set_bits(i2c, USB3503_PDS,
+				(USB3503_PORT2 | USB3503_PORT3));
+		if (err < 0) {
+			dev_err(&i2c->dev, "PDS failed (%d)\n", err);
+			goto err_hubmode;
+		}
+
+		/* CFG1 : SELF_BUS_PWR -> Self-Powerd operation */
+		err = usb3503_set_bits(i2c, USB3503_CFG1, USB3503_SELF_BUS_PWR);
+		if (err < 0) {
+			dev_err(&i2c->dev, "CFG1 failed (%d)\n", err);
+			goto err_hubmode;
+		}
+
+		/* SP_LOCK: clear connect_n, config_n for hub connect */
+		err = usb3503_clear_bits(i2c, USB3503_SP_ILOCK,
+				(USB3503_SPILOCK_CONNECT
+				 | USB3503_SPILOCK_CONFIG));
+		if (err < 0) {
+			dev_err(&i2c->dev, "SP_ILOCK failed (%d)\n", err);
+			goto err_hubmode;
+		}
+
+		hub->mode = mode;
+		dev_info(&i2c->dev, "switched to HUB mode\n");
+		break;
+
+	case USB3503_MODE_STANDBY:
+		usb3503_reset(hub->gpio_reset, 0);
+
+		hub->mode = mode;
+		dev_info(&i2c->dev, "switched to STANDBY mode\n");
+		break;
+
+	default:
+		dev_err(&i2c->dev, "unknown mode is request\n");
+		err = -EINVAL;
+		break;
+	}
+
+err_hubmode:
+	return err;
+}
+
+int usb3503_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+	struct usb3503_platform_data *pdata = i2c->dev.platform_data;
+	struct usb3503 *hub;
+	int err;
+
+	hub = kzalloc(sizeof(struct usb3503), GFP_KERNEL);
+	if (!hub) {
+		dev_err(&i2c->dev, "private data alloc fail\n");
+		return -ENOMEM;
+	}
+
+	i2c_set_clientdata(i2c, hub);
+	hub->client = i2c;
+
+	if (!pdata) {
+		dev_dbg(&i2c->dev, "missing platform data\n");
+	} else {
+		hub->gpio_intn		= pdata->gpio_intn;
+		hub->gpio_connect	= pdata->gpio_connect;
+		hub->gpio_reset		= pdata->gpio_reset;
+		hub->mode		= pdata->initial_mode;
+	}
+
+	if (gpio_is_valid(hub->gpio_intn)) {
+		err = gpio_request_one(hub->gpio_intn,
+				GPIOF_OUT_INIT_HIGH, "usb3503 intn");
+		if (err) {
+			dev_err(&i2c->dev,
+					"unable to request GPIO %d as connect pin (%d)\n",
+					hub->gpio_intn, err);
+			goto err_gpio_intn;
+		}
+	}
+
+	if (gpio_is_valid(hub->gpio_connect)) {
+		err = gpio_request_one(hub->gpio_connect,
+				GPIOF_OUT_INIT_HIGH, "usb3503 connect");
+		if (err) {
+			dev_err(&i2c->dev,
+					"unable to request GPIO %d as connect pin (%d)\n",
+					hub->gpio_connect, err);
+			goto err_gpio_connect;
+		}
+	}
+
+	if (gpio_is_valid(hub->gpio_reset)) {
+		err = gpio_request_one(hub->gpio_reset,
+				GPIOF_OUT_INIT_LOW, "usb3503 reset");
+		if (err) {
+			dev_err(&i2c->dev,
+					"unable to request GPIO %d as reset pin (%d)\n",
+					hub->gpio_reset, err);
+			goto err_gpio_reset;
+		}
+	}
+
+	usb3503_switch_mode(hub, pdata->initial_mode);
+
+	dev_info(&i2c->dev, "%s: probed on  %s mode\n", __func__,
+			(hub->mode == USB3503_MODE_HUB) ? "hub" : "standby");
+
+	return 0;
+
+err_gpio_reset:
+	if (gpio_is_valid(hub->gpio_connect))
+		gpio_free(hub->gpio_connect);
+err_gpio_connect:
+	if (gpio_is_valid(hub->gpio_intn))
+		gpio_free(hub->gpio_intn);
+err_gpio_intn:
+	kfree(hub);
+
+	return err;
+}
+
+static int usb3503_remove(struct i2c_client *i2c)
+{
+	struct usb3503 *hub = i2c_get_clientdata(i2c);
+
+	if (gpio_is_valid(hub->gpio_intn))
+		gpio_free(hub->gpio_intn);
+	if (gpio_is_valid(hub->gpio_connect))
+		gpio_free(hub->gpio_connect);
+	if (gpio_is_valid(hub->gpio_reset))
+		gpio_free(hub->gpio_reset);
+
+	kfree(hub);
+
+	return 0;
+}
+
+static const struct i2c_device_id usb3503_id[] = {
+	{ USB3503_I2C_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, usb3503_id);
+
+static struct i2c_driver usb3503_driver = {
+	.driver = {
+		.name = USB3503_I2C_NAME,
+	},
+	.probe		= usb3503_probe,
+	.remove		= usb3503_remove,
+	.id_table	= usb3503_id,
+};
+
+static int __init usb3503_init(void)
+{
+	return i2c_add_driver(&usb3503_driver);
+}
+
+static void __exit usb3503_exit(void)
+{
+	i2c_del_driver(&usb3503_driver);
+}
+
+module_init(usb3503_init);
+module_exit(usb3503_exit);
+
+MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>");
+MODULE_DESCRIPTION("USB3503 USB HUB driver");
+MODULE_LICENSE("GPL");

trunk/include/linux/platform_data/usb3503.h

@@ -0,0 +1,19 @@
+#ifndef __USB3503_H__
+#define __USB3503_H__
+
+#define USB3503_I2C_NAME	"usb3503"
+
+enum usb3503_mode {
+	USB3503_MODE_UNKNOWN,
+	USB3503_MODE_HUB,
+	USB3503_MODE_STANDBY,
+};
+
+struct usb3503_platform_data {
+	enum usb3503_mode	initial_mode;
+	int	gpio_intn;
+	int	gpio_connect;
+	int	gpio_reset;
+};
+
+#endif