---

yaml
---
r: 283645
b: refs/heads/master
c: ea75b9c
h: refs/heads/master
i:
  283643: b15898b
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 1229835ccb6d7ea2b36230121205be95c88eca88
+refs/heads/master: ea75b9c127e67683a11f7c9c8e052172f28d9266

trunk/arch/arm/mach-shmobile/Kconfig

@@ -28,6 +28,19 @@ config ARCH_SH73A0
 	select ARM_GIC
 	select I2C
 
+config ARCH_R8A7740
+	bool "R-Mobile A1 (R8A77400)"
+	select CPU_V7
+	select SH_CLK_CPG
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+
+config ARCH_R8A7779
+	bool "R-Car H1 (R8A77790)"
+	select CPU_V7
+	select SH_CLK_CPG
+	select ARM_GIC
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+
 comment "SH-Mobile Board Type"
 
 config MACH_G3EVM
@@ -75,6 +88,11 @@ config MACH_KOTA2
 	select ARCH_REQUIRE_GPIOLIB
 	depends on ARCH_SH73A0
 
+config MACH_MARZEN
+	bool "MARZEN board"
+	depends on ARCH_R8A7779
+	select ARCH_REQUIRE_GPIOLIB
+
 comment "SH-Mobile System Configuration"
 
 menu "Memory configuration"

trunk/arch/arm/mach-shmobile/Makefile

@@ -10,6 +10,8 @@ obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
 obj-$(CONFIG_ARCH_SH7377)	+= setup-sh7377.o clock-sh7377.o intc-sh7377.o
 obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7372.o intc-sh7372.o
 obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
+obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
 
 # SMP objects
 smp-y				:= platsmp.o headsmp.o
@@ -23,11 +25,14 @@ pfc-$(CONFIG_ARCH_SH7367)	+= pfc-sh7367.o
 pfc-$(CONFIG_ARCH_SH7377)	+= pfc-sh7377.o
 pfc-$(CONFIG_ARCH_SH7372)	+= pfc-sh7372.o
 pfc-$(CONFIG_ARCH_SH73A0)	+= pfc-sh73a0.o
+pfc-$(CONFIG_ARCH_R8A7740)	+= pfc-r8a7740.o
+pfc-$(CONFIG_ARCH_R8A7779)	+= pfc-r8a7779.o
 
 # IRQ objects
 obj-$(CONFIG_ARCH_SH7367)	+= entry-intc.o
 obj-$(CONFIG_ARCH_SH7377)	+= entry-intc.o
 obj-$(CONFIG_ARCH_SH7372)	+= entry-intc.o
+obj-$(CONFIG_ARCH_R8A7740)	+= entry-intc.o
 
 # PM objects
 obj-$(CONFIG_SUSPEND)		+= suspend.o
@@ -41,6 +46,7 @@ obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
 obj-$(CONFIG_MACH_AG5EVM)	+= board-ag5evm.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_KOTA2)	+= board-kota2.o
+obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)

trunk/arch/arm/mach-shmobile/board-marzen.c

@@ -0,0 +1,157 @@
+/*
+ * marzen board support
+ *
+ * Copyright (C) 2011  Renesas Solutions Corp.
+ * Copyright (C) 2011  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
+#include <linux/smsc911x.h>
+#include <mach/hardware.h>
+#include <mach/r8a7779.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+#include <asm/traps.h>
+
+/* SMSC LAN89218 */
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= 0x18000000, /* ExCS0 */
+		.end		= 0x180000ff, /* A1->A7 */
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= gic_spi(28), /* IRQ 1 */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_platdata = {
+	.flags		= SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device eth_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.dev  = {
+		.platform_data = &smsc911x_platdata,
+	},
+	.resource	= smsc911x_resources,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+};
+
+static struct platform_device *marzen_devices[] __initdata = {
+	&eth_device,
+};
+
+static struct map_desc marzen_io_desc[] __initdata = {
+	/* 2M entity map for 0xf0000000 (MPCORE) */
+	{
+		.virtual	= 0xf0000000,
+		.pfn		= __phys_to_pfn(0xf0000000),
+		.length		= SZ_2M,
+		.type		= MT_DEVICE_NONSHARED
+	},
+	/* 16M entity map for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */
+	{
+		.virtual	= 0xfe000000,
+		.pfn		= __phys_to_pfn(0xfe000000),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+static void __init marzen_map_io(void)
+{
+	iotable_init(marzen_io_desc, ARRAY_SIZE(marzen_io_desc));
+}
+
+static void __init marzen_init_early(void)
+{
+	r8a7779_add_early_devices();
+
+	/* Early serial console setup is not included here due to
+	 * memory map collisions. The SCIF serial ports in r8a7779
+	 * are difficult to entity map 1:1 due to collision with the
+	 * virtual memory range used by the coherent DMA code on ARM.
+	 *
+	 * Anyone wanting to debug early can remove UPF_IOREMAP from
+	 * the sh-sci serial console platform data, adjust mapbase
+	 * to a static M:N virt:phys mapping that needs to be added to
+	 * the mappings passed with iotable_init() above.
+	 *
+	 * Then add a call to shmobile_setup_console() from this function.
+	 *
+	 * As a final step pass earlyprint=sh-sci.2,115200 on the kernel
+	 * command line.
+	 */
+}
+
+static void __init marzen_init(void)
+{
+	r8a7779_pinmux_init();
+
+	/* SCIF2 (CN18: DEBUG0) */
+	gpio_request(GPIO_FN_TX2_C, NULL);
+	gpio_request(GPIO_FN_RX2_C, NULL);
+
+	/* SCIF4 (CN19: DEBUG1) */
+	gpio_request(GPIO_FN_TX4, NULL);
+	gpio_request(GPIO_FN_RX4, NULL);
+
+	/* LAN89218 */
+	gpio_request(GPIO_FN_EX_CS0, NULL); /* nCS */
+	gpio_request(GPIO_FN_IRQ1_B, NULL); /* IRQ + PME */
+
+	r8a7779_add_standard_devices();
+	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
+}
+
+static void __init marzen_timer_init(void)
+{
+	r8a7779_clock_init();
+	shmobile_timer.init();
+	return;
+}
+
+struct sys_timer marzen_timer = {
+	.init	= marzen_timer_init,
+};
+
+MACHINE_START(MARZEN, "marzen")
+	.map_io		= marzen_map_io,
+	.init_early	= marzen_init_early,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= r8a7779_init_irq,
+	.handle_irq	= shmobile_handle_irq_gic,
+	.init_machine	= marzen_init,
+	.timer		= &marzen_timer,
+MACHINE_END