---

yaml
---
r: 73129
b: refs/heads/master
c: 221d468
h: refs/heads/master
i:
  73127: fc177d7
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 633872b980f55f40a5e7de374f26970e41e2137b
+refs/heads/master: 221d46841b931d0e6b11e6251e482f2afe3974dd

trunk/MAINTAINERS

@@ -2549,7 +2549,7 @@ S:	Supported
 
 MISCELLANEOUS MCA-SUPPORT
 P:	James Bottomley
-M:	jejb@steeleye.com
+M:	James.Bottomley@HansenPartnership.com
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
@@ -3301,9 +3301,11 @@ S:	Maintained
 
 SCSI SUBSYSTEM
 P:	James E.J. Bottomley
-M:	James.Bottomley@SteelEye.com
+M:	James.Bottomley@HansenPartnership.com
 L:	linux-scsi@vger.kernel.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
+T:	git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
+T:	git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-pending-2.6.git
 S:	Maintained
 
 SCSI TAPE DRIVER

trunk/arch/x86/boot/pmjump.S

@@ -28,17 +28,19 @@
  * void protected_mode_jump(u32 entrypoint, u32 bootparams);
  */
 protected_mode_jump:
-	xorl	%ebx, %ebx		# Flag to indicate this is a boot
 	movl	%edx, %esi		# Pointer to boot_params table
 	movl	%eax, 2f		# Patch ljmpl instruction
-	jmp	1f			# Short jump to flush instruction q.
 
-1:
 	movw	$__BOOT_DS, %cx
+	xorl	%ebx, %ebx		# Per the 32-bit boot protocol
+	xorl	%ebp, %ebp		# Per the 32-bit boot protocol
+	xorl	%edi, %edi		# Per the 32-bit boot protocol
 
 	movl	%cr0, %edx
 	orb	$1, %dl			# Protected mode (PE) bit
 	movl	%edx, %cr0
+	jmp	1f			# Short jump to serialize on 386/486
+1:
 
 	movw	%cx, %ds
 	movw	%cx, %es

trunk/drivers/scsi/ibmvscsi/ibmvscsi.c

@@ -556,7 +556,7 @@ static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct,
 				   unsigned long timeout)
 {
 	u64 *crq_as_u64 = (u64 *) &evt_struct->crq;
-	int request_status;
+	int request_status = 0;
 	int rc;
 
 	/* If we have exhausted our request limit, just fail this request,
@@ -574,6 +574,13 @@ static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct,
 		if (request_status < -1)
 			goto send_error;
 		/* Otherwise, we may have run out of requests. */
+		/* If request limit was 0 when we started the adapter is in the
+		 * process of performing a login with the server adapter, or
+		 * we may have run out of requests.
+		 */
+		else if (request_status == -1 &&
+		         evt_struct->iu.srp.login_req.opcode != SRP_LOGIN_REQ)
+			goto send_busy;
 		/* Abort and reset calls should make it through.
 		 * Nothing except abort and reset should use the last two
 		 * slots unless we had two or less to begin with.
@@ -633,7 +640,8 @@ static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct,
 	unmap_cmd_data(&evt_struct->iu.srp.cmd, evt_struct, hostdata->dev);
 
 	free_event_struct(&hostdata->pool, evt_struct);
-	atomic_inc(&hostdata->request_limit);
+	if (request_status != -1)
+		atomic_inc(&hostdata->request_limit);
 	return SCSI_MLQUEUE_HOST_BUSY;
 
  send_error:
@@ -927,10 +935,11 @@ static int send_srp_login(struct ibmvscsi_host_data *hostdata)
 	login->req_buf_fmt = SRP_BUF_FORMAT_DIRECT | SRP_BUF_FORMAT_INDIRECT;
 
 	spin_lock_irqsave(hostdata->host->host_lock, flags);
-	/* Start out with a request limit of 1, since this is negotiated in
-	 * the login request we are just sending
+	/* Start out with a request limit of 0, since this is negotiated in
+	 * the login request we are just sending and login requests always
+	 * get sent by the driver regardless of request_limit.
 	 */
-	atomic_set(&hostdata->request_limit, 1);
+	atomic_set(&hostdata->request_limit, 0);
 
 	rc = ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2);
 	spin_unlock_irqrestore(hostdata->host->host_lock, flags);

trunk/drivers/scsi/lpfc/lpfc_scsi.c

@@ -682,6 +682,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
 	struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq);
 	int datadir = scsi_cmnd->sc_data_direction;
+	char tag[2];
 
 	lpfc_cmd->fcp_rsp->rspSnsLen = 0;
 	/* clear task management bits */
@@ -692,8 +693,8 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 
 	memcpy(&fcp_cmnd->fcpCdb[0], scsi_cmnd->cmnd, 16);
 
-	if (scsi_cmnd->device->tagged_supported) {
-		switch (scsi_cmnd->tag) {
+	if (scsi_populate_tag_msg(scsi_cmnd, tag)) {
+		switch (tag[0]) {
 		case HEAD_OF_QUEUE_TAG:
 			fcp_cmnd->fcpCntl1 = HEAD_OF_Q;
 			break;

trunk/drivers/scsi/osst.c

@@ -593,10 +593,11 @@ static int osst_verify_frame(struct osst_tape * STp, int frame_seq_number, int q
 	if (aux->frame_type != OS_FRAME_TYPE_DATA &&
 	    aux->frame_type != OS_FRAME_TYPE_EOD &&
 	    aux->frame_type != OS_FRAME_TYPE_MARKER) {
-		if (!quiet)
+		if (!quiet) {
 #if DEBUG
 			printk(OSST_DEB_MSG "%s:D: Skipping frame, frame type %x\n", name, aux->frame_type);
 #endif
+		}
 		goto err_out;
 	}
 	if (aux->frame_type == OS_FRAME_TYPE_EOD &&
@@ -606,11 +607,12 @@ static int osst_verify_frame(struct osst_tape * STp, int frame_seq_number, int q
 		goto err_out;
 	}
         if (frame_seq_number != -1 && ntohl(aux->frame_seq_num) != frame_seq_number) {
-		if (!quiet)
+		if (!quiet) {
 #if DEBUG
 			printk(OSST_DEB_MSG "%s:D: Skipping frame, sequence number %u (expected %d)\n", 
 					    name, ntohl(aux->frame_seq_num), frame_seq_number);
 #endif
+		}
 		goto err_out;
 	}
 	if (aux->frame_type == OS_FRAME_TYPE_MARKER) {

trunk/include/asm-powerpc/commproc.h

@@ -91,7 +91,7 @@ extern uint m8xx_cpm_hostalloc(uint size);
 extern int  m8xx_cpm_hostfree(uint start);
 extern void m8xx_cpm_hostdump(void);
 
-extern void cpm_load_patch(volatile immap_t *immr);
+extern void cpm_load_patch(cpm8xx_t *cp);
 
 /* Buffer descriptors used by many of the CPM protocols.
 */

trunk/mm/slub.c

@@ -1511,26 +1511,8 @@ static void *__slab_alloc(struct kmem_cache *s,
 
 	if (new) {
 		c = get_cpu_slab(s, smp_processor_id());
-		if (c->page) {
-			/*
-			 * Someone else populated the cpu_slab while we
-			 * enabled interrupts, or we have gotten scheduled
-			 * on another cpu. The page may not be on the
-			 * requested node even if __GFP_THISNODE was
-			 * specified. So we need to recheck.
-			 */
-			if (node_match(c, node)) {
-				/*
-				 * Current cpuslab is acceptable and we
-				 * want the current one since its cache hot
-				 */
-				discard_slab(s, new);
-				slab_lock(c->page);
-				goto load_freelist;
-			}
-			/* New slab does not fit our expectations */
+		if (c->page)
 			flush_slab(s, c);
-		}
 		slab_lock(new);
 		SetSlabFrozen(new);
 		c->page = new;