---

yaml --- r: 84841 b: refs/heads/master c: 2e6c4e5 h: refs/heads/master i: 84839: 0a30bde v: v3
git-mirror · Feb 8, 2008 · 9694177 · 9694177
1 parent b0991d0
commit 9694177
Show file tree

Hide file tree

Showing 317 changed files with 16,656 additions and 16,055 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 4a507d93fac78ecd37d18343c57c564f6a126f01
+refs/heads/master: 2e6c4e5101633a54aeee1f2e83020ee77fcb70d2
diff --git a/trunk/Documentation/DocBook/scsi.tmpl b/trunk/Documentation/DocBook/scsi.tmpl
@@ -12,7 +12,7 @@
         <surname>Bottomley</surname>
         <affiliation>
           <address>
-            <email>James.Bottomley@steeleye.com</email>
+            <email>James.Bottomley@hansenpartnership.com</email>
           </address>
         </affiliation>
       </author>

diff --git a/trunk/Documentation/hwmon/ads7828 b/trunk/Documentation/hwmon/ads7828
@@ -0,0 +1,36 @@
+Kernel driver ads7828
+=====================
+
+Supported chips:
+  * Texas Instruments/Burr-Brown ADS7828
+    Prefix: 'ads7828'
+    Addresses scanned: I2C 0x48, 0x49, 0x4a, 0x4b
+    Datasheet: Publicly available at the Texas Instruments website :
+               http://focus.ti.com/lit/ds/symlink/ads7828.pdf
+
+Authors:
+        Steve Hardy <steve@linuxrealtime.co.uk>
+
+Module Parameters
+-----------------
+
+* se_input: bool (default Y)
+  Single ended operation - set to N for differential mode
+* int_vref: bool (default Y)
+  Operate with the internal 2.5V reference - set to N for external reference
+* vref_mv: int (default 2500)
+  If using an external reference, set this to the reference voltage in mV
+
+Description
+-----------
+
+This driver implements support for the Texas Instruments ADS7828.
+
+This device is a 12-bit 8-channel A-D converter.
+
+It can operate in single ended mode (8 +ve inputs) or in differential mode,
+where 4 differential pairs can be measured.
+
+The chip also has the facility to use an external voltage reference.  This
+may be required if your hardware supplies the ADS7828 from a 5V supply, see
+the datasheet for more details.
diff --git a/trunk/Documentation/hwmon/it87 b/trunk/Documentation/hwmon/it87
@@ -30,7 +30,7 @@ Supported chips:
     Datasheet: No longer be available
 
 Authors:
-    Christophe Gauthron <chrisg@0-in.com>
+    Christophe Gauthron
     Jean Delvare <khali@linux-fr.org>
 
 

diff --git a/trunk/Documentation/hwmon/lm78 b/trunk/Documentation/hwmon/lm78
@@ -4,12 +4,12 @@ Kernel driver lm78
 Supported chips:
   * National Semiconductor LM78 / LM78-J
     Prefix: 'lm78'
-    Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
+    Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/
   * National Semiconductor LM79
     Prefix: 'lm79'
-    Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
+    Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/
 

diff --git a/trunk/Documentation/hwmon/lm87 b/trunk/Documentation/hwmon/lm87
@@ -4,8 +4,12 @@ Kernel driver lm87
 Supported chips:
   * National Semiconductor LM87
     Prefix: 'lm87'
-    Addresses scanned: I2C 0x2c - 0x2f
+    Addresses scanned: I2C 0x2c - 0x2e
     Datasheet: http://www.national.com/pf/LM/LM87.html
+  * Analog Devices ADM1024
+    Prefix: 'adm1024'
+    Addresses scanned: I2C 0x2c - 0x2e
+    Datasheet: http://www.analog.com/en/prod/0,2877,ADM1024,00.html
 
 Authors:
         Frodo Looijaard <frodol@dds.nl>,
@@ -19,11 +23,12 @@ Authors:
 Description
 -----------
 
-This driver implements support for the National Semiconductor LM87.
+This driver implements support for the National Semiconductor LM87
+and the Analog Devices ADM1024.
 
 The LM87 implements up to three temperature sensors, up to two fan
 rotation speed sensors, up to seven voltage sensors, alarms, and some
-miscellaneous stuff.
+miscellaneous stuff. The ADM1024 is fully compatible.
 
 Temperatures are measured in degrees Celsius. Each input has a high
 and low alarm settings. A high limit produces an alarm when the value

diff --git a/trunk/Documentation/hwmon/userspace-tools b/trunk/Documentation/hwmon/userspace-tools
@@ -14,7 +14,7 @@ Lm-sensors
 
 Core set of utilities that will allow you to obtain health information,
 setup monitoring limits etc. You can get them on their homepage
-http://www.lm-sensors.nu/ or as a package from your Linux distribution.
+http://www.lm-sensors.org/ or as a package from your Linux distribution.
 
 If from website:
 Get lm-sensors from project web site. Please note, you need only userspace

diff --git a/trunk/Documentation/hwmon/w83627ehf b/trunk/Documentation/hwmon/w83627ehf
@@ -23,8 +23,9 @@ W83627DHG super I/O chips. We will refer to them collectively as Winbond chips.
 
 The chips implement three temperature sensors, five fan rotation
 speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
-VID (6 pins), alarms with beep warnings (control unimplemented), and
-some automatic fan regulation strategies (plus manual fan control mode).
+VID (6 pins for the 627EHF/EHG, 8 pins for the 627DHG), alarms with beep
+warnings (control unimplemented), and some automatic fan regulation
+strategies (plus manual fan control mode).
 
 Temperatures are measured in degrees Celsius and measurement resolution is 1
 degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when

diff --git a/trunk/Documentation/hwmon/w83627hf b/trunk/Documentation/hwmon/w83627hf
@@ -73,5 +73,4 @@ doesn't help, you may just ignore the bogus VID reading with no harm done.
 
 For further information on this driver see the w83781d driver documentation.
 
-[1] http://www2.lm-sensors.nu/~lm78/cvs/browse.cgi/lm_sensors2/doc/vid
-
+[1] http://www.lm-sensors.org/browser/lm-sensors/trunk/doc/vid
diff --git a/trunk/Documentation/hwmon/w83781d b/trunk/Documentation/hwmon/w83781d
@@ -4,20 +4,16 @@ Kernel driver w83781d
 Supported chips:
   * Winbond W83781D
     Prefix: 'w83781d'
-    Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
+    Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
     Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83781d.pdf
   * Winbond W83782D
     Prefix: 'w83782d'
-    Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
+    Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
     Datasheet: http://www.winbond.com/PDF/sheet/w83782d.pdf
   * Winbond W83783S
     Prefix: 'w83783s'
     Addresses scanned: I2C 0x2d
     Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf
-  * Winbond W83627HF
-    Prefix: 'w83627hf'
-    Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
-    Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf
   * Asus AS99127F
     Prefix: 'as99127f'
     Addresses scanned: I2C 0x28 - 0x2f
@@ -50,20 +46,18 @@ force_subclients=bus,caddr,saddr,saddr
 Description
 -----------
 
-This driver implements support for the Winbond W83781D, W83782D, W83783S,
-W83627HF chips, and the Asus AS99127F chips. We will refer to them
-collectively as W8378* chips.
+This driver implements support for the Winbond W83781D, W83782D, W83783S
+chips, and the Asus AS99127F chips. We will refer to them collectively as
+W8378* chips.
 
 There is quite some difference between these chips, but they are similar
 enough that it was sensible to put them together in one driver.
-The W83627HF chip is assumed to be identical to the ISA W83782D.
 The Asus chips are similar to an I2C-only W83782D.
 
 Chip        #vin    #fanin  #pwm    #temp   wchipid vendid  i2c     ISA
 as99127f    7       3       0       3       0x31    0x12c3  yes     no
 as99127f rev.2 (type_name = as99127f)       0x31    0x5ca3  yes     no
 w83781d     7       3       0       3       0x10-1  0x5ca3  yes     yes
-w83627hf    9       3       2       3       0x21    0x5ca3  yes     yes(LPC)
 w83782d     9       3       2-4     3       0x30    0x5ca3  yes     yes
 w83783s     5-6     3       2       1-2     0x40    0x5ca3  yes     no
 
@@ -143,9 +137,9 @@ Individual alarm and beep bits:
 0x000400: in6
 0x000800: fan3
 0x001000: chassis
-0x002000: temp3 (W83782D and W83627HF only)
-0x010000: in7 (W83782D and W83627HF only)
-0x020000: in8 (W83782D and W83627HF only)
+0x002000: temp3 (W83782D only)
+0x010000: in7 (W83782D only)
+0x020000: in8 (W83782D only)
 
 If an alarm triggers, it will remain triggered until the hardware register
 is read at least once. This means that the cause for the alarm may

diff --git a/trunk/Documentation/hwmon/w83l786ng b/trunk/Documentation/hwmon/w83l786ng
@@ -0,0 +1,54 @@
+Kernel driver w83l786ng
+=====================
+
+Supported chips:
+  * Winbond W83L786NG/W83L786NR
+    Prefix: 'w83l786ng'
+    Addresses scanned: I2C 0x2e - 0x2f
+    Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L786NRNG09.pdf
+
+Author: Kevin Lo <kevlo@kevlo.org>
+
+
+Module Parameters
+-----------------
+
+* reset boolean
+  (default 0)
+  Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default
+  behavior is no chip reset to preserve BIOS settings
+
+
+Description
+-----------
+
+This driver implements support for Winbond W83L786NG/W83L786NR chips.
+
+The driver implements two temperature sensors, two fan rotation speed
+sensors, and three voltage sensors.
+
+Temperatures are measured in degrees Celsius and measurement resolution is 1
+degC for temp1 and temp2.
+
+Fan rotation speeds are reported in RPM (rotations per minute). Fan readings
+readings can be divided by a programmable divider (1, 2, 4, 8, 16, 32, 64
+or 128 for fan 1/2) to give the readings more range or accuracy.
+
+Voltage sensors (also known as IN sensors) report their values in millivolts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit.
+
+/sys files
+----------
+
+pwm[1-2] - this file stores PWM duty cycle or DC value (fan speed) in range:
+	    0 (stop) to 255 (full)
+pwm[1-2]_enable - this file controls mode of fan/temperature control:
+            * 0 Manual Mode
+            * 1 Thermal Cruise
+            * 2 Smart Fan II
+            * 4 FAN_SET
+pwm[1-2]_mode - Select PWM of DC mode
+            * 0 DC
+            * 1 PWM
+tolerance[1-2] - Value in degrees of Celsius (degC) for +- T
diff --git a/trunk/Documentation/i2c/busses/i2c-piix4 b/trunk/Documentation/i2c/busses/i2c-piix4
@@ -95,4 +95,4 @@ of all affected systems, so the only safe solution was to prevent access to
 the SMBus on all IBM systems (detected using DMI data.)
 
 For additional information, read:
-http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/README.thinkpad
+http://www.lm-sensors.org/browser/lm-sensors/trunk/README.thinkpad
diff --git a/trunk/Documentation/input/input-programming.txt b/trunk/Documentation/input/input-programming.txt
@@ -22,7 +22,7 @@ static struct input_dev *button_dev;
 
 static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
 {
-	input_report_key(button_dev, BTN_1, inb(BUTTON_PORT) & 1);
+	input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
 	input_sync(button_dev);
 }
 

diff --git a/trunk/Documentation/scsi/ChangeLog.arcmsr b/trunk/Documentation/scsi/ChangeLog.arcmsr
@@ -68,4 +68,45 @@
 **						2. modify the arcmsr_pci_slot_reset function
 **						3. modify the arcmsr_pci_ers_disconnect_forepart function
 **						4. modify the arcmsr_pci_ers_need_reset_forepart function
+** 1.20.00.15   09/27/2007	 Erich Chen & Nick Cheng
+**						1. add arcmsr_enable_eoi_mode() on adapter Type B
+** 						2. add readl(reg->iop2drv_doorbell_reg) in arcmsr_handle_hbb_isr()
+**						in case of the doorbell interrupt clearance is cached
+** 1.20.00.15   10/01/2007	 Erich Chen & Nick Cheng
+**						1. modify acb->devstate[i][j]
+**						as ARECA_RAID_GOOD instead of
+**						ARECA_RAID_GONE in arcmsr_alloc_ccb_pool
+** 1.20.00.15   11/06/2007       Erich Chen & Nick Cheng
+**						1. add conditional declaration for
+** 						arcmsr_pci_error_detected() and
+**						arcmsr_pci_slot_reset
+** 1.20.00.15	11/23/2007       Erich Chen & Nick Cheng
+**						1.check if the sg list member number
+**						exceeds arcmsr default limit in arcmsr_build_ccb()
+**						2.change the returned value type of arcmsr_build_ccb()
+**						from "void" to "int"
+**						3.add the conditional check if arcmsr_build_ccb()
+**						returns FAILED
+** 1.20.00.15	12/04/2007	 Erich Chen & Nick Cheng
+**						1. modify arcmsr_drain_donequeue() to ignore unknown
+**						command and let kernel process command timeout.
+**						This could handle IO request violating max. segments
+**						while Linux XFS over DM-CRYPT.
+**						Thanks to Milan Broz's comments <mbroz@redhat.com>
+** 1.20.00.15	12/24/2007	 Erich Chen & Nick Cheng
+**						1.fix the portability problems
+**						2.fix type B where we should _not_ iounmap() acb->pmu;
+**						it's not ioremapped.
+**						3.add return -ENOMEM if ioremap() fails
+**						4.transfer IS_SG64_ADDR w/ cpu_to_le32()
+**						in arcmsr_build_ccb
+**						5. modify acb->devstate[i][j] as ARECA_RAID_GONE instead of
+**						ARECA_RAID_GOOD in arcmsr_alloc_ccb_pool()
+**						6.fix arcmsr_cdb->Context as (unsigned long)arcmsr_cdb
+**						7.add the checking state of
+**						(outbound_intstatus & ARCMSR_MU_OUTBOUND_HANDLE_INT) == 0
+**						in arcmsr_handle_hba_isr
+**						8.replace pci_alloc_consistent()/pci_free_consistent() with kmalloc()/kfree() in arcmsr_iop_message_xfer()
+**						9. fix the release of dma memory for type B in arcmsr_free_ccb_pool()
+**						10.fix the arcmsr_polling_hbb_ccbdone()
 **************************************************************************
diff --git a/trunk/Documentation/scsi/scsi_mid_low_api.txt b/trunk/Documentation/scsi/scsi_mid_low_api.txt
@@ -1407,7 +1407,7 @@ Credits
 =======
 The following people have contributed to this document:
         Mike Anderson <andmike at us dot ibm dot com>
-        James Bottomley <James dot Bottomley at steeleye dot com> 
+        James Bottomley <James dot Bottomley at hansenpartnership dot com>
         Patrick Mansfield <patmans at us dot ibm dot com> 
         Christoph Hellwig <hch at infradead dot org>
         Doug Ledford <dledford at redhat dot com>
Original file line number	Diff line number	Diff line change
Expand Up		@@ -73,5 +73,4 @@ doesn't help, you may just ignore the bogus VID reading with no harm done.

		For further information on this driver see the w83781d driver documentation.

		[1] http://www2.lm-sensors.nu/~lm78/cvs/browse.cgi/lm_sensors2/doc/vid

		[1] http://www.lm-sensors.org/browser/lm-sensors/trunk/doc/vid