---

yaml
---
r: 201698
b: refs/heads/master
c: 7b70c42
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: a20df564d15bd28e3df24e1c65b885bd74d23f17
+refs/heads/master: 7b70c4275f28702b76b273c8534c38f8313812e9

trunk/Documentation/arm/memory.txt

@@ -33,7 +33,13 @@ ffff0000	ffff0fff	CPU vector page.
 
 fffe0000	fffeffff	XScale cache flush area.  This is used
 				in proc-xscale.S to flush the whole data
-				cache.  Free for other usage on non-XScale.
+				cache. (XScale does not have TCM.)
+
+fffe8000	fffeffff	DTCM mapping area for platforms with
+				DTCM mounted inside the CPU.
+
+fffe0000	fffe7fff	ITCM mapping area for platforms with
+				ITCM mounted inside the CPU.
 
 fff00000	fffdffff	Fixmap mapping region.  Addresses provided
 				by fix_to_virt() will be located here.

trunk/Documentation/arm/tcm.txt

@@ -19,8 +19,8 @@ defines a CPUID_TCM register that you can read out from the
 system control coprocessor. Documentation from ARM can be found
 at http://infocenter.arm.com, search for "TCM Status Register"
 to see documents for all CPUs. Reading this register you can
-determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the
-machine.
+determine if ITCM (bits 1-0) and/or DTCM (bit 17-16) is present
+in the machine.
 
 There is further a TCM region register (search for "TCM Region
 Registers" at the ARM site) that can report and modify the location
@@ -35,7 +35,15 @@ The TCM memory can then be remapped to another address again using
 the MMU, but notice that the TCM if often used in situations where
 the MMU is turned off. To avoid confusion the current Linux
 implementation will map the TCM 1 to 1 from physical to virtual
-memory in the location specified by the machine.
+memory in the location specified by the kernel. Currently Linux
+will map ITCM to 0xfffe0000 and on, and DTCM to 0xfffe8000 and
+on, supporting a maximum of 32KiB of ITCM and 32KiB of DTCM.
+
+Newer versions of the region registers also support dividing these
+TCMs in two separate banks, so for example an 8KiB ITCM is divided
+into two 4KiB banks with its own control registers. The idea is to
+be able to lock and hide one of the banks for use by the secure
+world (TrustZone).
 
 TCM is used for a few things:
 
@@ -65,18 +73,18 @@ in <asm/tcm.h>. Using this interface it is possible to:
   memory. Such a heap is great for things like saving
   device state when shutting off device power domains.
 
-A machine that has TCM memory shall select HAVE_TCM in
-arch/arm/Kconfig for itself, and then the
-rest of the functionality will depend on the physical
-location and size of ITCM and DTCM to be defined in
-mach/memory.h for the machine. Code that needs to use
-TCM shall #include <asm/tcm.h> If the TCM is not located
-at the place given in memory.h it will be moved using
-the TCM Region registers.
+A machine that has TCM memory shall select HAVE_TCM from
+arch/arm/Kconfig for itself. Code that needs to use TCM shall
+#include <asm/tcm.h>
 
 Functions to go into itcm can be tagged like this:
 int __tcmfunc foo(int bar);
 
+Since these are marked to become long_calls and you may want
+to have functions called locally inside the TCM without
+wasting space, there is also the __tcmlocalfunc prefix that
+will make the call relative.
+
 Variables to go into dtcm can be tagged like this:
 int __tcmdata foo;
 

trunk/arch/arm/Kconfig

@@ -10,6 +10,7 @@ config ARM
 	default y
 	select HAVE_AOUT
 	select HAVE_IDE
+	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
 	select GENERIC_ATOMIC64 if (!CPU_32v6K)
@@ -24,6 +25,7 @@ config ARM
 	select HAVE_KERNEL_LZMA
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
+	select HAVE_REGS_AND_STACK_ACCESS_API
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -55,7 +57,7 @@ config GENERIC_CLOCKEVENTS
 config GENERIC_CLOCKEVENTS_BROADCAST
 	bool
 	depends on GENERIC_CLOCKEVENTS
-	default y if SMP && !LOCAL_TIMERS
+	default y if SMP
 
 config HAVE_TCM
 	bool
@@ -440,21 +442,6 @@ config ARCH_IXP4XX
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
-config ARCH_L7200
-	bool "LinkUp-L7200"
-	select CPU_ARM720T
-	select FIQ
-	select ARCH_USES_GETTIMEOFFSET
-	help
-	  Say Y here if you intend to run this kernel on a LinkUp Systems
-	  L7200 Software Development Board which uses an ARM720T processor.
-	  Information on this board can be obtained at:
-
-	  <http://www.linkupsys.com/>
-
-	  If you have any questions or comments about the Linux kernel port
-	  to this board, send e-mail to <sjhill@cotw.com>.
-
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select PCI
@@ -734,7 +721,6 @@ config ARCH_SHARK
 config ARCH_LH7A40X
 	bool "Sharp LH7A40X"
 	select CPU_ARM922T
-	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_USES_GETTIMEOFFSET
 	help
@@ -1048,11 +1034,6 @@ endmenu
 
 source "arch/arm/common/Kconfig"
 
-config FORCE_MAX_ZONEORDER
-	int
-	depends on SA1111
-	default "9"
-
 menu "Bus support"
 
 config ARM_AMBA
@@ -1189,9 +1170,10 @@ config HOTPLUG_CPU
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
-		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
+		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
+		ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
 	default y
-	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
+	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || ARCH_U8500)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -1202,10 +1184,10 @@ source kernel/Kconfig.preempt
 
 config HZ
 	int
-	default 128 if ARCH_L7200
 	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
+	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
 	default 100
 
 config THUMB2_KERNEL
@@ -1258,24 +1240,14 @@ config OABI_COMPAT
 config ARCH_HAS_HOLES_MEMORYMODEL
 	bool
 
-# Discontigmem is deprecated
-config ARCH_DISCONTIGMEM_ENABLE
-	bool
-
 config ARCH_SPARSEMEM_ENABLE
 	bool
 
 config ARCH_SPARSEMEM_DEFAULT
 	def_bool ARCH_SPARSEMEM_ENABLE
 
 config ARCH_SELECT_MEMORY_MODEL
-	def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE
-
-config NODES_SHIFT
-	int
-	default "4" if ARCH_LH7A40X
-	default "2"
-	depends on NEED_MULTIPLE_NODES
+	def_bool ARCH_SPARSEMEM_ENABLE
 
 config HIGHMEM
 	bool "High Memory Support (EXPERIMENTAL)"
@@ -1307,8 +1279,33 @@ config HW_PERF_EVENTS
 	  Enable hardware performance counter support for perf events. If
 	  disabled, perf events will use software events only.
 
+config SPARSE_IRQ
+	def_bool n
+	help
+	  This enables support for sparse irqs. This is useful in general
+	  as most CPUs have a fairly sparse array of IRQ vectors, which
+	  the irq_desc then maps directly on to. Systems with a high
+	  number of off-chip IRQs will want to treat this as
+	  experimental until they have been independently verified.
+
 source "mm/Kconfig"
 
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order" if ARCH_SHMOBILE
+	range 11 64 if ARCH_SHMOBILE
+	default "9" if SA1111
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
 config LEDS
 	bool "Timer and CPU usage LEDs"
 	depends on ARCH_CDB89712 || ARCH_EBSA110 || \

trunk/arch/arm/Makefile

@@ -143,7 +143,6 @@ machine-$(CONFIG_ARCH_IXP23XX)		:= ixp23xx
 machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
 machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
 machine-$(CONFIG_ARCH_KS8695)		:= ks8695
-machine-$(CONFIG_ARCH_L7200)		:= l7200
 machine-$(CONFIG_ARCH_LH7A40X)		:= lh7a40x
 machine-$(CONFIG_ARCH_LOKI) 		:= loki
 machine-$(CONFIG_ARCH_LPC32XX)		:= lpc32xx

trunk/arch/arm/boot/compressed/Makefile

@@ -20,10 +20,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y)
 OBJS		+= head-shark.o ofw-shark.o
 endif
 
-ifeq ($(CONFIG_ARCH_L7200),y)
-OBJS		+= head-l7200.o
-endif
-
 ifeq ($(CONFIG_ARCH_P720T),y)
 # Borrow this code from SA1100
 OBJS		+= head-sa1100.o

trunk/arch/arm/common/gic.c

@@ -108,6 +108,51 @@ static void gic_unmask_irq(unsigned int irq)
 	spin_unlock(&irq_controller_lock);
 }
 
+static int gic_set_type(unsigned int irq, unsigned int type)
+{
+	void __iomem *base = gic_dist_base(irq);
+	unsigned int gicirq = gic_irq(irq);
+	u32 enablemask = 1 << (gicirq % 32);
+	u32 enableoff = (gicirq / 32) * 4;
+	u32 confmask = 0x2 << ((gicirq % 16) * 2);
+	u32 confoff = (gicirq / 16) * 4;
+	bool enabled = false;
+	u32 val;
+
+	/* Interrupt configuration for SGIs can't be changed */
+	if (gicirq < 16)
+		return -EINVAL;
+
+	if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
+		return -EINVAL;
+
+	spin_lock(&irq_controller_lock);
+
+	val = readl(base + GIC_DIST_CONFIG + confoff);
+	if (type == IRQ_TYPE_LEVEL_HIGH)
+		val &= ~confmask;
+	else if (type == IRQ_TYPE_EDGE_RISING)
+		val |= confmask;
+
+	/*
+	 * As recommended by the spec, disable the interrupt before changing
+	 * the configuration
+	 */
+	if (readl(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
+		writel(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
+		enabled = true;
+	}
+
+	writel(val, base + GIC_DIST_CONFIG + confoff);
+
+	if (enabled)
+		writel(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
+
+	spin_unlock(&irq_controller_lock);
+
+	return 0;
+}
+
 #ifdef CONFIG_SMP
 static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 {
@@ -161,6 +206,7 @@ static struct irq_chip gic_chip = {
 	.ack		= gic_ack_irq,
 	.mask		= gic_mask_irq,
 	.unmask		= gic_unmask_irq,
+	.set_type	= gic_set_type,
 #ifdef CONFIG_SMP
 	.set_affinity	= gic_set_cpu,
 #endif

trunk/arch/arm/common/sa1111.c

@@ -185,13 +185,10 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	},
 };
 
-void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+void __init sa1111_adjust_zones(unsigned long *size, unsigned long *holes)
 {
 	unsigned int sz = SZ_1M >> PAGE_SHIFT;
 
-	if (node != 0)
-		sz = 0;
-
 	size[1] = size[0] - sz;
 	size[0] = sz;
 }

trunk/arch/arm/include/asm/hwcap.h

@@ -19,6 +19,7 @@
 #define HWCAP_NEON	4096
 #define HWCAP_VFPv3	8192
 #define HWCAP_VFPv3D16	16384
+#define HWCAP_TLS	32768
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 /*

trunk/arch/arm/include/asm/irq.h

@@ -7,6 +7,8 @@
 #define irq_canonicalize(i)	(i)
 #endif
 
+#define NR_IRQS_LEGACY	16
+
 /*
  * Use this value to indicate lack of interrupt
  * capability