---

yaml
---
r: 264591
b: refs/heads/master
c: fb1dddd
h: refs/heads/master
i:
  264589: 1c4de04
  264587: 696df8f
  264583: fa2b8ff
  264575: 8f4e6a9
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: f73765fcb8bb79e80af58059441eb931679e68c0
+refs/heads/master: fb1dddd73dfd35d4f8669c4b849ce33483950237

trunk/Documentation/00-INDEX

@@ -272,8 +272,6 @@ printk-formats.txt
 	- how to get printk format specifiers right
 prio_tree.txt
 	- info on radix-priority-search-tree use for indexing vmas.
-ramoops.txt
-	- documentation of the ramoops oops/panic logging module.
 rbtree.txt
 	- info on what red-black trees are and what they are for.
 robust-futex-ABI.txt

trunk/Documentation/PCI/MSI-HOWTO.txt

@@ -45,7 +45,7 @@ arrived in memory (this becomes more likely with devices behind PCI-PCI
 bridges).  In order to ensure that all the data has arrived in memory,
 the interrupt handler must read a register on the device which raised
 the interrupt.  PCI transaction ordering rules require that all the data
-arrive in memory before the value may be returned from the register.
+arrives in memory before the value can be returned from the register.
 Using MSIs avoids this problem as the interrupt-generating write cannot
 pass the data writes, so by the time the interrupt is raised, the driver
 knows that all the data has arrived in memory.
@@ -86,13 +86,13 @@ device.
 
 int pci_enable_msi(struct pci_dev *dev)
 
-A successful call allocates ONE interrupt to the device, regardless
-of how many MSIs the device supports.  The device is switched from
+A successful call will allocate ONE interrupt to the device, regardless
+of how many MSIs the device supports.  The device will be switched from
 pin-based interrupt mode to MSI mode.  The dev->irq number is changed
-to a new number which represents the message signaled interrupt;
-consequently, this function should be called before the driver calls
-request_irq(), because an MSI is delivered via a vector that is
-different from the vector of a pin-based interrupt.
+to a new number which represents the message signaled interrupt.
+This function should be called before the driver calls request_irq()
+since enabling MSIs disables the pin-based IRQ and the driver will not
+receive interrupts on the old interrupt.
 
 4.2.2 pci_enable_msi_block
 
@@ -111,20 +111,20 @@ the device are in the range dev->irq to dev->irq + count - 1.
 
 If this function returns a negative number, it indicates an error and
 the driver should not attempt to request any more MSI interrupts for
-this device.  If this function returns a positive number, it is
-less than 'count' and indicates the number of interrupts that could have
-been allocated.  In neither case is the irq value updated or the device
-switched into MSI mode.
+this device.  If this function returns a positive number, it will be
+less than 'count' and indicate the number of interrupts that could have
+been allocated.  In neither case will the irq value have been
+updated, nor will the device have been switched into MSI mode.
 
 The device driver must decide what action to take if
-pci_enable_msi_block() returns a value less than the number requested.
-For instance, the driver could still make use of fewer interrupts;
-in this case the driver should call pci_enable_msi_block()
+pci_enable_msi_block() returns a value less than the number asked for.
+Some devices can make use of fewer interrupts than the maximum they
+request; in this case the driver should call pci_enable_msi_block()
 again.  Note that it is not guaranteed to succeed, even when the
 'count' has been reduced to the value returned from a previous call to
 pci_enable_msi_block().  This is because there are multiple constraints
 on the number of vectors that can be allocated; pci_enable_msi_block()
-returns as soon as it finds any constraint that doesn't allow the
+will return as soon as it finds any constraint that doesn't allow the
 call to succeed.
 
 4.2.3 pci_disable_msi
@@ -137,10 +137,10 @@ interrupt number and frees the previously allocated message signaled
 interrupt(s).  The interrupt may subsequently be assigned to another
 device, so drivers should not cache the value of dev->irq.
 
-Before calling this function, a device driver must always call free_irq()
-on any interrupt for which it previously called request_irq().
-Failure to do so results in a BUG_ON(), leaving the device with
-MSI enabled and thus leaking its vector.
+A device driver must always call free_irq() on the interrupt(s)
+for which it has called request_irq() before calling this function.
+Failure to do so will result in a BUG_ON(), the device will be left with
+MSI enabled and will leak its vector.
 
 4.3 Using MSI-X
 
@@ -155,10 +155,10 @@ struct msix_entry {
 };
 
 This allows for the device to use these interrupts in a sparse fashion;
-for example, it could use interrupts 3 and 1027 and yet allocate only a
+for example it could use interrupts 3 and 1027 and allocate only a
 two-element array.  The driver is expected to fill in the 'entry' value
-in each element of the array to indicate for which entries the kernel
-should assign interrupts; it is invalid to fill in two entries with the
+in each element of the array to indicate which entries it wants the kernel
+to assign interrupts for.  It is invalid to fill in two entries with the
 same number.
 
 4.3.1 pci_enable_msix
@@ -168,11 +168,10 @@ int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
 Calling this function asks the PCI subsystem to allocate 'nvec' MSIs.
 The 'entries' argument is a pointer to an array of msix_entry structs
 which should be at least 'nvec' entries in size.  On success, the
-device is switched into MSI-X mode and the function returns 0.
-The 'vector' member in each entry is populated with the interrupt number;
-the driver should then call request_irq() for each 'vector' that it
-decides to use.  The device driver is responsible for keeping track of the
-interrupts assigned to the MSI-X vectors so it can free them again later.
+function will return 0 and the device will have been switched into
+MSI-X interrupt mode.  The 'vector' elements in each entry will have
+been filled in with the interrupt number.  The driver should then call
+request_irq() for each 'vector' that it decides to use.
 
 If this function returns a negative number, it indicates an error and
 the driver should not attempt to allocate any more MSI-X interrupts for
@@ -182,14 +181,16 @@ below.
 
 This function, in contrast with pci_enable_msi(), does not adjust
 dev->irq.  The device will not generate interrupts for this interrupt
-number once MSI-X is enabled.
+number once MSI-X is enabled.  The device driver is responsible for
+keeping track of the interrupts assigned to the MSI-X vectors so it can
+free them again later.
 
 Device drivers should normally call this function once per device
 during the initialization phase.
 
-It is ideal if drivers can cope with a variable number of MSI-X interrupts;
+It is ideal if drivers can cope with a variable number of MSI-X interrupts,
 there are many reasons why the platform may not be able to provide the
-exact number that a driver asks for.
+exact number a driver asks for.
 
 A request loop to achieve that might look like:
 
@@ -211,15 +212,15 @@ static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
 
 void pci_disable_msix(struct pci_dev *dev)
 
-This function should be used to undo the effect of pci_enable_msix().  It frees
+This API should be used to undo the effect of pci_enable_msix().  It frees
 the previously allocated message signaled interrupts.  The interrupts may
 subsequently be assigned to another device, so drivers should not cache
 the value of the 'vector' elements over a call to pci_disable_msix().
 
-Before calling this function, a device driver must always call free_irq()
-on any interrupt for which it previously called request_irq().
-Failure to do so results in a BUG_ON(), leaving the device with
-MSI-X enabled and thus leaking its vector.
+A device driver must always call free_irq() on the interrupt(s)
+for which it has called request_irq() before calling this function.
+Failure to do so will result in a BUG_ON(), the device will be left with
+MSI enabled and will leak its vector.
 
 4.3.3 The MSI-X Table
 
@@ -231,10 +232,10 @@ mask or unmask an interrupt, it should call disable_irq() / enable_irq().
 4.4 Handling devices implementing both MSI and MSI-X capabilities
 
 If a device implements both MSI and MSI-X capabilities, it can
-run in either MSI mode or MSI-X mode, but not both simultaneously.
+run in either MSI mode or MSI-X mode but not both simultaneously.
 This is a requirement of the PCI spec, and it is enforced by the
 PCI layer.  Calling pci_enable_msi() when MSI-X is already enabled or
-pci_enable_msix() when MSI is already enabled results in an error.
+pci_enable_msix() when MSI is already enabled will result in an error.
 If a device driver wishes to switch between MSI and MSI-X at runtime,
 it must first quiesce the device, then switch it back to pin-interrupt
 mode, before calling pci_enable_msi() or pci_enable_msix() and resuming
@@ -250,7 +251,7 @@ the MSI-X facilities in preference to the MSI facilities.  As mentioned
 above, MSI-X supports any number of interrupts between 1 and 2048.
 In constrast, MSI is restricted to a maximum of 32 interrupts (and
 must be a power of two).  In addition, the MSI interrupt vectors must
-be allocated consecutively, so the system might not be able to allocate
+be allocated consecutively, so the system may not be able to allocate
 as many vectors for MSI as it could for MSI-X.  On some platforms, MSI
 interrupts must all be targeted at the same set of CPUs whereas MSI-X
 interrupts can all be targeted at different CPUs.
@@ -280,7 +281,7 @@ disabled to enabled and back again.
 
 Using 'lspci -v' (as root) may show some devices with "MSI", "Message
 Signalled Interrupts" or "MSI-X" capabilities.  Each of these capabilities
-has an 'Enable' flag which is followed with either "+" (enabled)
+has an 'Enable' flag which will be followed with either "+" (enabled)
 or "-" (disabled).
 
 
@@ -297,7 +298,7 @@ The PCI stack provides three ways to disable MSIs:
 
 Some host chipsets simply don't support MSIs properly.  If we're
 lucky, the manufacturer knows this and has indicated it in the ACPI
-FADT table.  In this case, Linux automatically disables MSIs.
+FADT table.  In this case, Linux will automatically disable MSIs.
 Some boards don't include this information in the table and so we have
 to detect them ourselves.  The complete list of these is found near the
 quirk_disable_all_msi() function in drivers/pci/quirks.c.
@@ -316,7 +317,7 @@ Some bridges allow you to enable MSIs by changing some bits in their
 PCI configuration space (especially the Hypertransport chipsets such
 as the nVidia nForce and Serverworks HT2000).  As with host chipsets,
 Linux mostly knows about them and automatically enables MSIs if it can.
-If you have a bridge unknown to Linux, you can enable
+If you have a bridge which Linux doesn't yet know about, you can enable
 MSIs in configuration space using whatever method you know works, then
 enable MSIs on that bridge by doing:
 
@@ -326,7 +327,7 @@ where $bridge is the PCI address of the bridge you've enabled (eg
 0000:00:0e.0).
 
 To disable MSIs, echo 0 instead of 1.  Changing this value should be
-done with caution as it could break interrupt handling for all devices
+done with caution as it can break interrupt handling for all devices
 below this bridge.
 
 Again, please notify linux-pci@vger.kernel.org of any bridges that need
@@ -335,7 +336,7 @@ special handling.
 5.3. Disabling MSIs on a single device
 
 Some devices are known to have faulty MSI implementations.  Usually this
-is handled in the individual device driver, but occasionally it's necessary
+is handled in the individual device driver but occasionally it's necessary
 to handle this with a quirk.  Some drivers have an option to disable use
 of MSI.  While this is a convenient workaround for the driver author,
 it is not good practise, and should not be emulated.
@@ -349,7 +350,7 @@ for your machine.  You should also check your .config to be sure you
 have enabled CONFIG_PCI_MSI.
 
 Then, 'lspci -t' gives the list of bridges above a device.  Reading
-/sys/bus/pci/devices/*/msi_bus will tell you whether MSIs are enabled (1)
+/sys/bus/pci/devices/*/msi_bus will tell you whether MSI are enabled (1)
 or disabled (0).  If 0 is found in any of the msi_bus files belonging
 to bridges between the PCI root and the device, MSIs are disabled.
 

trunk/Documentation/SubmittingDrivers

@@ -130,7 +130,7 @@ Linux kernel master tree:
 	ftp.??.kernel.org:/pub/linux/kernel/...
 	?? == your country code, such as "us", "uk", "fr", etc.
 
-	http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git
+	http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git
 
 Linux kernel mailing list:
 	linux-kernel@vger.kernel.org

trunk/Documentation/SubmittingPatches

@@ -303,7 +303,7 @@ patches that are being emailed around.
 
 The sign-off is a simple line at the end of the explanation for the
 patch, which certifies that you wrote it or otherwise have the right to
-pass it on as an open-source patch.  The rules are pretty simple: if you
+pass it on as a open-source patch.  The rules are pretty simple: if you
 can certify the below:
 
         Developer's Certificate of Origin 1.1

trunk/Documentation/block/cfq-iosched.txt

@@ -43,74 +43,3 @@ If one sets slice_idle=0 and if storage supports NCQ, CFQ internally switches
 to IOPS mode and starts providing fairness in terms of number of requests
 dispatched. Note that this mode switching takes effect only for group
 scheduling. For non-cgroup users nothing should change.
-
-CFQ IO scheduler Idling Theory
-===============================
-Idling on a queue is primarily about waiting for the next request to come
-on same queue after completion of a request. In this process CFQ will not
-dispatch requests from other cfq queues even if requests are pending there.
-
-The rationale behind idling is that it can cut down on number of seeks
-on rotational media. For example, if a process is doing dependent
-sequential reads (next read will come on only after completion of previous
-one), then not dispatching request from other queue should help as we
-did not move the disk head and kept on dispatching sequential IO from
-one queue.
-
-CFQ has following service trees and various queues are put on these trees.
-
-	sync-idle	sync-noidle	async
-
-All cfq queues doing synchronous sequential IO go on to sync-idle tree.
-On this tree we idle on each queue individually.
-
-All synchronous non-sequential queues go on sync-noidle tree. Also any
-request which are marked with REQ_NOIDLE go on this service tree. On this
-tree we do not idle on individual queues instead idle on the whole group
-of queues or the tree. So if there are 4 queues waiting for IO to dispatch
-we will idle only once last queue has dispatched the IO and there is
-no more IO on this service tree.
-
-All async writes go on async service tree. There is no idling on async
-queues.
-
-CFQ has some optimizations for SSDs and if it detects a non-rotational
-media which can support higher queue depth (multiple requests at in
-flight at a time), then it cuts down on idling of individual queues and
-all the queues move to sync-noidle tree and only tree idle remains. This
-tree idling provides isolation with buffered write queues on async tree.
-
-FAQ
-===
-Q1. Why to idle at all on queues marked with REQ_NOIDLE.
-
-A1. We only do tree idle (all queues on sync-noidle tree) on queues marked
-    with REQ_NOIDLE. This helps in providing isolation with all the sync-idle
-    queues. Otherwise in presence of many sequential readers, other
-    synchronous IO might not get fair share of disk.
-
-    For example, if there are 10 sequential readers doing IO and they get
-    100ms each. If a REQ_NOIDLE request comes in, it will be scheduled
-    roughly after 1 second. If after completion of REQ_NOIDLE request we
-    do not idle, and after a couple of milli seconds a another REQ_NOIDLE
-    request comes in, again it will be scheduled after 1second. Repeat it
-    and notice how a workload can lose its disk share and suffer due to
-    multiple sequential readers.
-
-    fsync can generate dependent IO where bunch of data is written in the
-    context of fsync, and later some journaling data is written. Journaling
-    data comes in only after fsync has finished its IO (atleast for ext4
-    that seemed to be the case). Now if one decides not to idle on fsync
-    thread due to REQ_NOIDLE, then next journaling write will not get
-    scheduled for another second. A process doing small fsync, will suffer
-    badly in presence of multiple sequential readers.
-
-    Hence doing tree idling on threads using REQ_NOIDLE flag on requests
-    provides isolation from multiple sequential readers and at the same
-    time we do not idle on individual threads.
-
-Q2. When to specify REQ_NOIDLE
-A2. I would think whenever one is doing synchronous write and not expecting
-    more writes to be dispatched from same context soon, should be able
-    to specify REQ_NOIDLE on writes and that probably should work well for
-    most of the cases.

trunk/Documentation/email-clients.txt

@@ -199,16 +199,18 @@ to coerce it into behaving.
 
 To beat some sense out of the internal editor, do this:
 
+- Under account settings, composition and addressing, uncheck "Compose
+  messages in HTML format".
+
 - Edit your Thunderbird config settings so that it won't use format=flowed.
   Go to "edit->preferences->advanced->config editor" to bring up the
   thunderbird's registry editor, and set "mailnews.send_plaintext_flowed" to
   "false".
 
-- Disable HTML Format: Set "mail.identity.id1.compose_html" to "false".
-
-- Enable "preformat" mode: Set "editor.quotesPreformatted" to "true".
-
-- Enable UTF8: Set "prefs.converted-to-utf8" to "true".
+- Enable "preformat" mode: Shft-click on the Write icon to bring up the HTML
+  composer, select "Preformat" from the drop-down box just under the subject
+  line, then close the message without saving.  (This setting also applies to
+  the text composer, but the only control for it is in the HTML composer.)
 
 - Install the "toggle wordwrap" extension.  Download the file from:
     https://addons.mozilla.org/thunderbird/addon/2351/

trunk/Documentation/feature-removal-schedule.txt

@@ -592,11 +592,3 @@ Why:    In 3.0, we can now autodetect internal 3G device and already have
 	interface that was used by acer-wmi driver. It will replaced by
 	information log when acer-wmi initial.
 Who:    Lee, Chun-Yi <jlee@novell.com>
-
-----------------------------
-What:	The XFS nodelaylog mount option
-When:	3.3
-Why:	The delaylog mode that has been the default since 2.6.39 has proven
-	stable, and the old code is in the way of additional improvements in
-	the log code.
-Who:	Christoph Hellwig <hch@lst.de>

trunk/Documentation/filesystems/befs.txt

@@ -27,7 +27,7 @@ His original code can still be found at:
 Does anyone know of a more current email address for Makoto? He doesn't
 respond to the address given above...
 
-This filesystem doesn't have a maintainer.
+Current maintainer: Sergey S. Kostyliov <rathamahata@php4.ru>
 
 WHAT IS THIS DRIVER?
 ==================

trunk/Documentation/hwmon/max16065

@@ -62,13 +62,6 @@ can be safely used to identify the chip. You will have to instantiate
 the devices explicitly. Please see Documentation/i2c/instantiating-devices for
 details.
 
-WARNING: Do not access chip registers using the i2cdump command, and do not use
-any of the i2ctools commands on a command register (0xa5 to 0xac). The chips
-supported by this driver interpret any access to a command register (including
-read commands) as request to execute the command in question. This may result in
-power loss, board resets, and/or Flash corruption. Worst case, your board may
-turn into a brick.
-
 
 Sysfs entries
 -------------