net: bcmgenet: correctly resume adapter from Wake-on-LAN

In case we configured the adapter to be a wake up source from
Wake-on-LAN, but we never actually woke up using Wake-on-LAN, we will
leave the adapter in MagicPacket matching mode, which prevents any other
type of packets from reaching the RX engine. Fix this by calling
bcmgenet_power_up() with GENET_POWER_WOL_MAGIC to restore the adapter
configuration in bcmgenet_resume().

The second problem we had was an imbalanced clock disabling in
bcmgenet_wol_resume(), the Wake-on-LAN slow clock is only enabled in
bcmgenet_suspend() if we configured Wake-on-LAN, yet we unconditionally
disabled the clock in bcmgenet_wol_resume().

Fixes: 8c90db7 ("net: bcmgenet: suspend and resume from Wake-on-LAN")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/genet/bcmgenet.c

@@ -1962,7 +1962,8 @@ static void bcmgenet_set_hw_addr(struct bcmgenet_priv *priv,
 static int bcmgenet_wol_resume(struct bcmgenet_priv *priv)
 {
 	/* From WOL-enabled suspend, switch to regular clock */
-	clk_disable_unprepare(priv->clk_wol);
+	if (priv->wolopts)
+		clk_disable_unprepare(priv->clk_wol);
 
 	phy_init_hw(priv->phydev);
 	/* Speed settings must be restored */
@@ -2668,9 +2669,7 @@ static int bcmgenet_resume(struct device *d)
 	if (ret)
 		goto out_clk_disable;
 
-	if (priv->wolopts)
-		ret = bcmgenet_wol_resume(priv);
-
+	ret = bcmgenet_wol_resume(priv);
 	if (ret)
 		goto out_clk_disable;
 
@@ -2685,6 +2684,9 @@ static int bcmgenet_resume(struct device *d)
 		bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT);
 	}
 
+	if (priv->wolopts)
+		bcmgenet_power_up(priv, GENET_POWER_WOL_MAGIC);
+
 	/* Disable RX/TX DMA and flush TX queues */
 	dma_ctrl = bcmgenet_dma_disable(priv);