NFC: nci: add generic uart support

Some NFC controller supports UART as host interface. As with SPI, a lot of code can be shared between vendor drivers. This patch add the generic support of UART and provides some extension API for vendor specific needs. This code is strongly inspired by the Bluetooth HCI ldisc implementation. NCI UART vendor drivers will have to register themselves to this layer via nci_uart_register. Underlying tty will have to be configured from user land thanks to an ioctl. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
git-mirror · Jun 11, 2015 · 9961127 · 9961127
1 parent 4a2b947
commit 9961127
Show file tree

Hide file tree

Showing 6 changed files with 554 additions and 0 deletions.
diff --git a/include/net/nfc/nci.h b/include/net/nfc/nci.h
@@ -35,6 +35,7 @@
 #define NCI_MAX_NUM_RF_CONFIGS					10
 #define NCI_MAX_NUM_CONN					10
 #define NCI_MAX_PARAM_LEN					251
+#define NCI_MAX_PACKET_SIZE					258
 
 /* NCI Status Codes */
 #define NCI_STATUS_OK						0x00

diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h
@@ -31,6 +31,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/skbuff.h>
+#include <linux/tty.h>
 
 #include <net/nfc/nfc.h>
 #include <net/nfc/nci.h>
@@ -391,4 +392,50 @@ int nci_spi_send(struct nci_spi *nspi,
 		 struct sk_buff *skb);
 struct sk_buff *nci_spi_read(struct nci_spi *nspi);
 
+/* ----- NCI UART ---- */
+
+/* Ioctl */
+#define NCIUARTSETDRIVER	_IOW('U', 0, char *)
+
+enum nci_uart_driver {
+	NCI_UART_DRIVER_MARVELL = 0,
+	NCI_UART_DRIVER_MAX
+};
+
+struct nci_uart;
+
+struct nci_uart_ops {
+	int (*open)(struct nci_uart *nci_uart);
+	void (*close)(struct nci_uart *nci_uart);
+	int (*recv)(struct nci_uart *nci_uart, struct sk_buff *skb);
+	int (*recv_buf)(struct nci_uart *nci_uart, const u8 *data, char *flags,
+			int count);
+	int (*send)(struct nci_uart *nci_uart, struct sk_buff *skb);
+	void (*tx_start)(struct nci_uart *nci_uart);
+	void (*tx_done)(struct nci_uart *nci_uart);
+};
+
+struct nci_uart {
+	struct module		*owner;
+	struct nci_uart_ops	ops;
+	const char		*name;
+	enum nci_uart_driver	driver;
+
+	/* Dynamic data */
+	struct nci_dev		*ndev;
+	spinlock_t		rx_lock;
+	struct work_struct	write_work;
+	struct tty_struct	*tty;
+	unsigned long		tx_state;
+	struct sk_buff_head	tx_q;
+	struct sk_buff		*tx_skb;
+	struct sk_buff		*rx_skb;
+	int			rx_packet_len;
+	void			*drv_data;
+};
+
+int nci_uart_register(struct nci_uart *nu);
+void nci_uart_unregister(struct nci_uart *nu);
+void nci_uart_set_config(struct nci_uart *nu, int baudrate, int flow_ctrl);
+
 #endif /* __NCI_CORE_H */
diff --git a/include/uapi/linux/tty.h b/include/uapi/linux/tty.h
@@ -34,5 +34,6 @@
 #define N_TI_WL		22	/* for TI's WL BT, FM, GPS combo chips */
 #define N_TRACESINK	23	/* Trace data routing for MIPI P1149.7 */
 #define N_TRACEROUTER	24	/* Trace data routing for MIPI P1149.7 */
+#define N_NCI		25	/* NFC NCI UART */
 
 #endif /* _UAPI_LINUX_TTY_H */
diff --git a/net/nfc/nci/Kconfig b/net/nfc/nci/Kconfig
@@ -19,3 +19,10 @@ config NFC_NCI_SPI
 	  an NFC Controller (NFCC) and a Device Host (DH).
 
 	  Say yes if you use an NCI driver that requires SPI link layer.
+
+config NFC_NCI_UART
+	depends on NFC_NCI && TTY
+	tristate "NCI over UART protocol support"
+	default n
+	help
+	  Say yes if you use an NCI driver that requires UART link layer.
diff --git a/net/nfc/nci/Makefile b/net/nfc/nci/Makefile
@@ -7,3 +7,6 @@ obj-$(CONFIG_NFC_NCI) += nci.o
 nci-objs := core.o data.o lib.o ntf.o rsp.o hci.o
 
 nci-$(CONFIG_NFC_NCI_SPI) += spi.o
+
+nci_uart-y += uart.o
+obj-$(CONFIG_NFC_NCI_UART) += nci_uart.o