---

yaml
---
r: 350716
b: refs/heads/master
c: 2d9f0d9
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 005a69d632cd8694061c2dd27492fe874780b5ee
+refs/heads/master: 2d9f0d964be94fd51c7303288c6f9c88bf2381fe

trunk/drivers/input/input.c

@@ -1785,12 +1785,13 @@ static void devm_input_device_release(struct device *dev, void *res)
  * its driver (or binding fails). Once managed input device is allocated,
  * it is ready to be set up and registered in the same fashion as regular
  * input device. There are no special devm_input_device_[un]register()
- * variants, regular ones work with both managed and unmanaged devices.
+ * variants, regular ones work with both managed and unmanaged devices,
+ * should you need them. In most cases however, managed input device need
+ * not be explicitly unregistered or freed.
  *
  * NOTE: the owner device is set up as parent of input device and users
  * should not override it.
  */
-
 struct input_dev *devm_input_allocate_device(struct device *dev)
 {
 	struct input_dev *input;
@@ -2004,6 +2005,17 @@ static void devm_input_device_unregister(struct device *dev, void *res)
  * Once device has been successfully registered it can be unregistered
  * with input_unregister_device(); input_free_device() should not be
  * called in this case.
+ *
+ * Note that this function is also used to register managed input devices
+ * (ones allocated with devm_input_allocate_device()). Such managed input
+ * devices need not be explicitly unregistered or freed, their tear down
+ * is controlled by the devres infrastructure. It is also worth noting
+ * that tear down of managed input devices is internally a 2-step process:
+ * registered managed input device is first unregistered, but stays in
+ * memory and can still handle input_event() calls (although events will
+ * not be delivered anywhere). The freeing of managed input device will
+ * happen later, when devres stack is unwound to the point where device
+ * allocation was made.
  */
 int input_register_device(struct input_dev *dev)
 {

trunk/drivers/input/joystick/xpad.c

@@ -118,11 +118,12 @@ static const struct xpad_device {
 	u8 xtype;
 } xpad_device[] = {
 	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },
-	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
+	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
+	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
+	{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
-	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
 	{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
 	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
@@ -136,9 +137,12 @@ static const struct xpad_device {
 	{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX },
 	{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", XTYPE_XBOX360 },
 	{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 },
 	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
+	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
 	{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
 	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
@@ -148,24 +152,28 @@ static const struct xpad_device {
 	{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
 	{ 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
 	{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
-	{ 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
 	{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
+	{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
 	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
-	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
-	{ 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
 	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
-	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
+	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
-	{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
-	{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
-	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
 };
@@ -235,7 +243,7 @@ static const signed short xpad_abs_triggers[] = {
 	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
 	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }
 
-static struct usb_device_id xpad_table [] = {
+static struct usb_device_id xpad_table[] = {
 	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
 	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech X-Box 360 style controllers */
@@ -248,10 +256,11 @@ static struct usb_device_id xpad_table [] = {
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Harminix Rock Band Guitar and Drums */
 	XPAD_XBOX360_VENDOR(0x0f0d),		/* Hori Controllers */
 	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
+	XPAD_XBOX360_VENDOR(0x24c6),		/* PowerA Controllers */
 	{ }
 };
 
-MODULE_DEVICE_TABLE (usb, xpad_table);
+MODULE_DEVICE_TABLE(usb, xpad_table);
 
 struct usb_xpad {
 	struct input_dev *dev;		/* input device interface */
@@ -783,7 +792,7 @@ static int xpad_open(struct input_dev *dev)
 	struct usb_xpad *xpad = input_get_drvdata(dev);
 
 	/* URB was submitted in probe */
-	if(xpad->xtype == XTYPE_XBOX360W)
+	if (xpad->xtype == XTYPE_XBOX360W)
 		return 0;
 
 	xpad->irq_in->dev = xpad->udev;

trunk/drivers/input/keyboard/gpio_keys.c

@@ -602,6 +602,7 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 
 	i = 0;
 	for_each_child_of_node(node, pp) {
+		int gpio;
 		enum of_gpio_flags flags;
 
 		if (!of_find_property(pp, "gpios", NULL)) {
@@ -610,9 +611,19 @@ gpio_keys_get_devtree_pdata(struct device *dev)
 			continue;
 		}
 
+		gpio = of_get_gpio_flags(pp, 0, &flags);
+		if (gpio < 0) {
+			error = gpio;
+			if (error != -EPROBE_DEFER)
+				dev_err(dev,
+					"Failed to get gpio flags, error: %d\n",
+					error);
+			goto err_free_pdata;
+		}
+
 		button = &pdata->buttons[i++];
 
-		button->gpio = of_get_gpio_flags(pp, 0, &flags);
+		button->gpio = gpio;
 		button->active_low = flags & OF_GPIO_ACTIVE_LOW;
 
 		if (of_property_read_u32(pp, "linux,code", &button->code)) {

trunk/drivers/input/keyboard/gpio_keys_polled.c

@@ -135,6 +135,7 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
 
 	i = 0;
 	for_each_child_of_node(node, pp) {
+		int gpio;
 		enum of_gpio_flags flags;
 
 		if (!of_find_property(pp, "gpios", NULL)) {
@@ -143,9 +144,19 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
 			continue;
 		}
 
+		gpio = of_get_gpio_flags(pp, 0, &flags);
+		if (gpio < 0) {
+			error = gpio;
+			if (error != -EPROBE_DEFER)
+				dev_err(dev,
+					"Failed to get gpio flags, error: %d\n",
+					error);
+			goto err_free_pdata;
+		}
+
 		button = &pdata->buttons[i++];
 
-		button->gpio = of_get_gpio_flags(pp, 0, &flags);
+		button->gpio = gpio;
 		button->active_low = flags & OF_GPIO_ACTIVE_LOW;
 
 		if (of_property_read_u32(pp, "linux,code", &button->code)) {

trunk/drivers/input/keyboard/lm8323.c

@@ -398,7 +398,7 @@ static irqreturn_t lm8323_irq(int irq, void *_lm)
 			lm8323_configure(lm);
 		}
 		for (i = 0; i < LM8323_NUM_PWMS; i++) {
-			if (ints & (1 << (INT_PWM1 + i))) {
+			if (ints & (INT_PWM1 << i)) {
 				dev_vdbg(&lm->client->dev,
 					 "pwm%d engine completed\n", i);
 				pwm_done(&lm->pwm[i]);

trunk/drivers/input/matrix-keymap.c

@@ -24,6 +24,7 @@
 #include <linux/input.h>
 #include <linux/of.h>
 #include <linux/export.h>
+#include <linux/module.h>
 #include <linux/input/matrix_keypad.h>
 
 static bool matrix_keypad_map_key(struct input_dev *input_dev,
@@ -182,3 +183,5 @@ int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
 	return 0;
 }
 EXPORT_SYMBOL(matrix_keypad_build_keymap);
+
+MODULE_LICENSE("GPL");

trunk/drivers/input/mouse/sentelic.c

@@ -791,7 +791,7 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse)
 			fsp_set_slot(dev, 0, fgrs > 0, abs_x, abs_y);
 			fsp_set_slot(dev, 1, false, 0, 0);
 		}
-		if (fgrs > 0) {
+		if (fgrs == 1 || (fgrs == 2 && !(packet[0] & FSP_PB0_MFMC_FGR2))) {
 			input_report_abs(dev, ABS_X, abs_x);
 			input_report_abs(dev, ABS_Y, abs_y);
 		}

trunk/drivers/input/tablet/wacom_sys.c

@@ -553,10 +553,10 @@ static int wacom_set_device_mode(struct usb_interface *intf, int report_id, int
 	if (!rep_data)
 		return error;
 
-	rep_data[0] = report_id;
-	rep_data[1] = mode;
-
 	do {
+		rep_data[0] = report_id;
+		rep_data[1] = mode;
+
 		error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
 		                         report_id, rep_data, length, 1);
 		if (error >= 0)

trunk/drivers/input/tablet/wacom_wac.c

@@ -2036,7 +2036,8 @@ static const struct wacom_features wacom_features_0xD1 =
 	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xD2 =
 	{ "Wacom Bamboo Craft",   WACOM_PKGLEN_BBFUN,     14720,  9200, 1023,
-	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+	  .touch_max = 2 };
 static const struct wacom_features wacom_features_0xD3 =
 	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13700, 1023,
 	  31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,