Merge branch 'mlog_replace_for_39' of git://repo.or.cz/taoma-kernel i…

…nto ocfs2-merge-window-fix

.gitignore

@@ -28,6 +28,7 @@ modules.builtin
 *.gz
 *.bz2
 *.lzma
+*.xz
 *.lzo
 *.patch
 *.gcno

Documentation/DocBook/filesystems.tmpl

@@ -82,6 +82,11 @@
      </sect1>
   </chapter>
 
+  <chapter id="fs_events">
+     <title>Events based on file descriptors</title>
+!Efs/eventfd.c
+  </chapter>
+
   <chapter id="sysfs">
      <title>The Filesystem for Exporting Kernel Objects</title>
 !Efs/sysfs/file.c

Documentation/hwmon/jc42

@@ -51,7 +51,8 @@ Supported chips:
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f
-    Datasheet: -
+    Datasheet:
+	http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
 
 Author:
 	Guenter Roeck <guenter.roeck@ericsson.com>
@@ -60,7 +61,11 @@ Author:
 Description
 -----------
 
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
 The driver auto-detects the chips listed above, but can be manually instantiated
 to support other JC 42.4 compliant chips.
 
@@ -81,15 +86,19 @@ limits. The chip supports only a single register to configure the hysteresis,
 which applies to all limits. This register can be written by writing into
 temp1_crit_hyst. Other hysteresis attributes are read-only.
 
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
 Sysfs entries
 -------------
 
 temp1_input		Temperature (RO)
-temp1_min		Minimum temperature (RW)
-temp1_max		Maximum temperature (RW)
-temp1_crit		Critical high temperature (RW)
+temp1_min		Minimum temperature (RO or RW)
+temp1_max		Maximum temperature (RO or RW)
+temp1_crit		Critical high temperature (RO or RW)
 
-temp1_crit_hyst		Critical hysteresis temperature (RW)
+temp1_crit_hyst		Critical hysteresis temperature (RO or RW)
 temp1_max_hyst		Maximum hysteresis temperature (RO)
 
 temp1_min_alarm		Temperature low alarm

Documentation/hwmon/k10temp

@@ -9,6 +9,8 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space
@@ -17,10 +19,14 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
     http://support.amd.com/us/Processor_TechDocs/43373.pdf
   AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -34,7 +40,7 @@ Description
 -----------
 
 This driver permits reading of the internal temperature sensor of AMD
-Family 10h and 11h processors.
+Family 10h/11h/12h/14h processors.
 
 All these processors have a sensor, but on those for Socket F or AM2+,
 the sensor may return inconsistent values (erratum 319).  The driver

Documentation/kernel-parameters.txt

@@ -144,6 +144,11 @@ a fixed number of characters. This limit depends on the architecture
 and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
+Finally, the [KMG] suffix is commonly described after a number of kernel
+parameter values. These 'K', 'M', and 'G' letters represent the _binary_
+multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
+bytes respectively. Such letter suffixes can also be entirely omitted.
+
 
 	acpi=		[HW,ACPI,X86]
 			Advanced Configuration and Power Interface
@@ -545,16 +550,20 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format:
 			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
 
-	crashkernel=nn[KMG]@ss[KMG]
-			[KNL] Reserve a chunk of physical memory to
-			hold a kernel to switch to with kexec on panic.
+	crashkernel=size[KMG][@offset[KMG]]
+			[KNL] Using kexec, Linux can switch to a 'crash kernel'
+			upon panic. This parameter reserves the physical
+			memory region [offset, offset + size] for that kernel
+			image. If '@offset' is omitted, then a suitable offset
+			is selected automatically. Check
+			Documentation/kdump/kdump.txt for further details.
 
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
-			Documentation/kdump/kdump.txt for a example.
+			Documentation/kdump/kdump.txt for an example.
 
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
@@ -1262,10 +1271,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			6 (KERN_INFO)		informational
 			7 (KERN_DEBUG)		debug-level messages
 
-	log_buf_len=n	Sets the size of the printk ring buffer, in bytes.
-			Format: { n | nk | nM }
-			n must be a power of two.  The default size
-			is set in the kernel config file.
+	log_buf_len=n[KMG]	Sets the size of the printk ring buffer,
+			in bytes.  n must be a power of two.  The default
+			size is set in the kernel config file.
 
 	logo.nologo	[FB] Disables display of the built-in Linux logo.
 			This may be used to provide more screen space for

Documentation/networking/00-INDEX

@@ -40,8 +40,6 @@ decnet.txt
 	- info on using the DECnet networking layer in Linux.
 depca.txt
 	- the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver
-dgrs.txt
-	- the Digi International RightSwitch SE-X Ethernet driver
 dmfe.txt
 	- info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver.
 e100.txt
@@ -50,8 +48,6 @@ e1000.txt
 	- info on Intel's E1000 line of gigabit ethernet boards
 eql.txt
 	- serial IP load balancing
-ethertap.txt
-	- the Ethertap user space packet reception and transmission driver
 ewrk3.txt
 	- the Digital EtherWORKS 3 DE203/4/5 Ethernet driver
 filter.txt
@@ -104,8 +100,6 @@ tuntap.txt
 	- TUN/TAP device driver, allowing user space Rx/Tx of packets.
 vortex.txt
 	- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
-wavelan.txt
-	- AT&T GIS (nee NCR) WaveLAN card: An Ethernet-like radio transceiver
 x25.txt
 	- general info on X.25 development.
 x25-iface.txt

Documentation/networking/dns_resolver.txt

@@ -61,7 +61,6 @@ before the more general line given above as the first match is the one taken.
 	create	dns_resolver  	foo:*	*	/usr/sbin/dns.foo %k
 
 
-
 =====
 USAGE
 =====
@@ -104,6 +103,14 @@ implemented in the module can be called after doing:
      returned also.
 
 
+===============================
+READING DNS KEYS FROM USERSPACE
+===============================
+
+Keys of dns_resolver type can be read from userspace using keyctl_read() or
+"keyctl read/print/pipe".
+
+
 =========
 MECHANISM
 =========

MAINTAINERS

@@ -885,7 +885,7 @@ S:	Supported
 
 ARM/QUALCOMM MSM MACHINE SUPPORT
 M:	David Brown <davidb@codeaurora.org>
-M:	Daniel Walker <dwalker@codeaurora.org>
+M:	Daniel Walker <dwalker@fifo99.com>
 M:	Bryan Huntsman <bryanh@codeaurora.org>
 L:	linux-arm-msm@vger.kernel.org
 F:	arch/arm/mach-msm/
@@ -1010,6 +1010,15 @@ L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-s5p*/
 
+ARM/SAMSUNG MOBILE MACHINE SUPPORT
+M:	Kyungmin Park <kyungmin.park@samsung.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-s5pv210/mach-aquila.c
+F:	arch/arm/mach-s5pv210/mach-goni.c
+F:	arch/arm/mach-exynos4/mach-universal_c210.c
+F:	arch/arm/mach-exynos4/mach-nuri.c
+
 ARM/SAMSUNG S5P SERIES FIMC SUPPORT
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
@@ -1467,6 +1476,7 @@ F:	include/net/bluetooth/
 
 BONDING DRIVER
 M:	Jay Vosburgh <fubar@us.ibm.com>
+M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
@@ -1692,6 +1702,13 @@ M:	Andy Whitcroft <apw@canonical.com>
 S:	Supported
 F:	scripts/checkpatch.pl
 
+CHINESE DOCUMENTATION
+M:	Harry Wei <harryxiyou@gmail.com>
+L:	xiyoulinuxkernelgroup@googlegroups.com
+L:	linux-kernel@zh-kernel.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/zh_CN/
+
 CISCO VIC ETHERNET NIC DRIVER
 M:	Vasanthy Kolluri <vkolluri@cisco.com>
 M:	Roopa Prabhu <roprabhu@cisco.com>
@@ -2026,7 +2043,7 @@ F:	Documentation/scsi/dc395x.txt
 F:	drivers/scsi/dc395x.*
 
 DCCP PROTOCOL
-M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
+M:	Gerrit Renker <gerrit@erg.abdn.ac.uk>
 L:	dccp@vger.kernel.org
 W:	http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp
 S:	Maintained
@@ -2873,7 +2890,6 @@ M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
-T:	quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
 F:	Documentation/hwmon/
@@ -3513,7 +3529,7 @@ F:	drivers/hwmon/jc42.c
 F:	Documentation/hwmon/jc42
 
 JFS FILESYSTEM
-M:	Dave Kleikamp <shaggy@linux.vnet.ibm.com>
+M:	Dave Kleikamp <shaggy@kernel.org>
 L:	jfs-discussion@lists.sourceforge.net
 W:	http://jfs.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
@@ -4276,10 +4292,7 @@ S:	Maintained
 F:	net/sched/sch_netem.c
 
 NETERION 10GbE DRIVERS (s2io/vxge)
-M:	Ramkrishna Vepa <ramkrishna.vepa@exar.com>
-M:	Sivakumar Subramani <sivakumar.subramani@exar.com>
-M:	Sreenivasa Honnur <sreenivasa.honnur@exar.com>
-M:	Jon Mason <jon.mason@exar.com>
+M:	Jon Mason <jdmason@kudzu.us>
 L:	netdev@vger.kernel.org
 W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
 W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
@@ -5165,6 +5178,7 @@ F:	drivers/char/random.c
 
 RAPIDIO SUBSYSTEM
 M:	Matt Porter <mporter@kernel.crashing.org>
+M:	Alexandre Bounine <alexandre.bounine@idt.com>
 S:	Maintained
 F:	drivers/rapidio/
 
@@ -5267,7 +5281,7 @@ S:	Maintained
 F:	drivers/net/wireless/rtl818x/rtl8180/
 
 RTL8187 WIRELESS DRIVER
-M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M:	Herton Ronaldo Krzesinski <herton@canonical.com>
 M:	Hin-Tak Leung <htl10@users.sourceforge.net>
 M:	Larry Finger <Larry.Finger@lwfinger.net>
 L:	linux-wireless@vger.kernel.org
@@ -6105,7 +6119,7 @@ S:	Maintained
 F:	security/tomoyo/
 
 TOPSTAR LAPTOP EXTRAS DRIVER
-M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M:	Herton Ronaldo Krzesinski <herton@canonical.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/topstar-laptop.c

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 38
-EXTRAVERSION = -rc5
+EXTRAVERSION =
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -11,6 +11,7 @@ config ALPHA
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select AUTO_IRQ_AFFINITY if SMP
+	select GENERIC_HARDIRQS_NO_DEPRECATED
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,

arch/alpha/kernel/irq.c

@@ -44,20 +44,25 @@ static char irq_user_affinity[NR_IRQS];
 
 int irq_select_affinity(unsigned int irq)
 {
-	struct irq_desc *desc = irq_to_desc[irq];
+	struct irq_data *data = irq_get_irq_data(irq);
+	struct irq_chip *chip;
 	static int last_cpu;
 	int cpu = last_cpu + 1;
 
-	if (!desc || !get_irq_desc_chip(desc)->set_affinity || irq_user_affinity[irq])
+	if (!data)
+		return 1;
+	chip = irq_data_get_irq_chip(data);
+
+	if (!chip->irq_set_affinity || irq_user_affinity[irq])
 		return 1;
 
 	while (!cpu_possible(cpu) ||
 	       !cpumask_test_cpu(cpu, irq_default_affinity))
 		cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
 	last_cpu = cpu;
 
-	cpumask_copy(desc->affinity, cpumask_of(cpu));
-	get_irq_desc_chip(desc)->set_affinity(irq, cpumask_of(cpu));
+	cpumask_copy(data->affinity, cpumask_of(cpu));
+	chip->irq_set_affinity(data, cpumask_of(cpu), false);
 	return 0;
 }
 #endif /* CONFIG_SMP */

arch/alpha/kernel/irq_alpha.c

@@ -228,14 +228,9 @@ struct irqaction timer_irqaction = {
 void __init
 init_rtc_irq(void)
 {
-	struct irq_desc *desc = irq_to_desc(RTC_IRQ);
-
-	if (desc) {
-		desc->status |= IRQ_DISABLED;
-		set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
-			handle_simple_irq, "RTC");
-		setup_irq(RTC_IRQ, &timer_irqaction);
-	}
+	set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
+				      handle_simple_irq, "RTC");
+	setup_irq(RTC_IRQ, &timer_irqaction);
 }
 
 /* Dummy irqactions.  */