---

yaml
---
r: 354821
b: refs/heads/master
c: 4f73bc4
h: refs/heads/master
i:
  354819: 80d350b
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: a1bf9584429d61b7096f93ae09325e1ba538e9e8
+refs/heads/master: 4f73bc4dd3e8563ef4109f293a092820dff66d92

trunk/arch/alpha/Kconfig

@@ -125,6 +125,7 @@ choice
 
 config ALPHA_GENERIC
 	bool "Generic"
+	depends on TTY
 	help
 	  A generic kernel will run on all supported Alpha hardware.
 
@@ -491,6 +492,7 @@ config VGA_HOSE
 
 config ALPHA_SRM
 	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
+	depends on TTY
 	default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
 	---help---
 	  There are two different types of booting firmware on Alphas: SRM,

trunk/arch/ia64/hp/sim/Kconfig

@@ -8,6 +8,7 @@ config HP_SIMETH
 
 config HP_SIMSERIAL
 	bool "Simulated serial driver support"
+	depends on TTY
 
 config HP_SIMSERIAL_CONSOLE
 	bool "Console for HP simulator"

trunk/arch/m68k/Kconfig.devices

@@ -41,7 +41,7 @@ config NFBLOCK
 
 config NFCON
 	tristate "NatFeat console driver"
-	depends on NATFEAT
+	depends on TTY && NATFEAT
 	help
 	  Say Y to include support for the ARAnyM NatFeat console driver
 	  which allows the console output to be redirected to the stderr

trunk/arch/parisc/Kconfig

@@ -23,6 +23,7 @@ config PARISC
 	select HAVE_MOD_ARCH_SPECIFIC
 	select MODULES_USE_ELF_RELA
 	select CLONE_BACKWARDS
+	select TTY # Needed for pdc_cons.c
 
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used

trunk/arch/tile/Kconfig

@@ -121,6 +121,7 @@ config DEBUG_COPY_FROM_USER
 	def_bool n
 
 config HVC_TILE
+	depends on TTY
 	select HVC_DRIVER
 	def_bool y
 

trunk/arch/um/Kconfig.common

@@ -12,6 +12,7 @@ config UML
 	select GENERIC_CPU_DEVICES
 	select GENERIC_IO
 	select GENERIC_CLOCKEVENTS
+	select TTY # Needed for line.c
 
 config MMU
 	bool

trunk/arch/xtensa/Kconfig

@@ -132,6 +132,7 @@ choice
 
 config XTENSA_PLATFORM_ISS
 	bool "ISS"
+	depends on TTY
 	select XTENSA_CALIBRATE_CCOUNT
 	select SERIAL_CONSOLE
 	select XTENSA_ISS_NETWORK

trunk/drivers/bluetooth/Kconfig

@@ -26,6 +26,7 @@ config BT_HCIBTSDIO
 
 config BT_HCIUART
 	tristate "HCI UART driver"
+	depends on TTY
 	help
 	  Bluetooth HCI UART driver.
 	  This driver is required if you want to use Bluetooth devices with

trunk/drivers/char/Kconfig

@@ -53,7 +53,7 @@ source "drivers/tty/serial/Kconfig"
 
 config TTY_PRINTK
 	bool "TTY driver to output user messages via printk"
-	depends on EXPERT
+	depends on EXPERT && TTY
 	default n
 	---help---
 	  If you say Y here, the support for writing user messages (i.e.
@@ -159,7 +159,7 @@ source "drivers/tty/hvc/Kconfig"
 
 config VIRTIO_CONSOLE
 	tristate "Virtio console"
-	depends on VIRTIO
+	depends on VIRTIO && TTY
 	select HVC_DRIVER
 	help
 	  Virtio console for use with lguest and other hypervisors.
@@ -392,6 +392,7 @@ config XILINX_HWICAP
 
 config R3964
 	tristate "Siemens R3964 line discipline"
+	depends on TTY
 	---help---
 	  This driver allows synchronous communication with devices using the
 	  Siemens R3964 packet protocol. Unless you are dealing with special
@@ -439,7 +440,7 @@ source "drivers/char/pcmcia/Kconfig"
 
 config MWAVE
 	tristate "ACP Modem (Mwave) support"
-	depends on X86
+	depends on X86 && TTY
 	select SERIAL_8250
 	---help---
 	  The ACP modem (Mwave) for Linux is a WinModem. It is composed of a

trunk/drivers/char/pcmcia/Kconfig

@@ -7,7 +7,7 @@ menu "PCMCIA character devices"
 
 config SYNCLINK_CS
 	tristate "SyncLink PC Card support"
-	depends on PCMCIA
+	depends on PCMCIA && TTY
 	help
 	  Enable support for the SyncLink PC Card serial adapter, running
 	  asynchronous and HDLC communications up to 512Kbps. The port is
@@ -45,7 +45,7 @@ config CARDMAN_4040
 
 config IPWIRELESS
 	tristate "IPWireless 3G UMTS PCMCIA card support"
-	depends on PCMCIA && NETDEVICES
+	depends on PCMCIA && NETDEVICES && TTY
 	select PPP
 	help
 	  This is a driver for 3G UMTS PCMCIA card from IPWireless company. In

trunk/drivers/i2c/busses/Kconfig

@@ -803,7 +803,7 @@ config I2C_PARPORT_LIGHT
 
 config I2C_TAOS_EVM
 	tristate "TAOS evaluation module"
-	depends on EXPERIMENTAL
+	depends on EXPERIMENTAL && TTY
 	select SERIO
 	select SERIO_SERPORT
 	default n

trunk/drivers/input/joystick/Kconfig

@@ -132,6 +132,8 @@ config JOYSTICK_TMDC
 
 source "drivers/input/joystick/iforce/Kconfig"
 
+if TTY
+
 config JOYSTICK_WARRIOR
 	tristate "Logitech WingMan Warrior joystick"
 	select SERIO
@@ -205,6 +207,8 @@ config JOYSTICK_ZHENHUA
 	  To compile this driver as a module, choose M here: the
 	  module will be called zhenhua.
 
+endif # TTY
+
 config JOYSTICK_DB9
 	tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads"
 	depends on PARPORT

trunk/drivers/input/keyboard/Kconfig

@@ -69,6 +69,7 @@ config KEYBOARD_ATARI
 config KEYBOARD_ATKBD
 	tristate "AT keyboard" if EXPERT || !X86
 	default y
+	depends on TTY
 	select SERIO
 	select SERIO_LIBPS2
 	select SERIO_I8042 if X86
@@ -153,6 +154,7 @@ config KEYBOARD_BFIN
 
 config KEYBOARD_LKKBD
 	tristate "DECstation/VAXstation LK201/LK401 keyboard"
+	depends on TTY
 	select SERIO
 	help
 	  Say Y here if you want to use a LK201 or LK401 style serial
@@ -268,7 +270,7 @@ config KEYBOARD_HIL_OLD
 
 config KEYBOARD_HIL
 	tristate "HP HIL keyboard/pointer support"
-	depends on GSC || HP300
+	depends on (GSC || HP300) && TTY
 	default y
 	select HP_SDC
 	select HIL_MLC
@@ -400,6 +402,7 @@ config KEYBOARD_IMX
 
 config KEYBOARD_NEWTON
 	tristate "Newton keyboard"
+	depends on TTY
 	select SERIO
 	help
 	  Say Y here if you have a Newton keyboard on a serial port.
@@ -479,6 +482,8 @@ config KEYBOARD_SAMSUNG
 	  To compile this driver as a module, choose M here: the
 	  module will be called samsung-keypad.
 
+if TTY
+
 config KEYBOARD_STOWAWAY
 	tristate "Stowaway keyboard"
 	select SERIO
@@ -501,6 +506,8 @@ config KEYBOARD_SUNKBD
 	  To compile this driver as a module, choose M here: the
 	  module will be called sunkbd.
 
+endif # TTY
+
 config KEYBOARD_SH_KEYSC
 	tristate "SuperH KEYSC keypad support"
 	depends on SUPERH || ARCH_SHMOBILE
@@ -597,6 +604,7 @@ config KEYBOARD_TWL4030
 
 config KEYBOARD_XTKBD
 	tristate "XT keyboard"
+	depends on TTY
 	select SERIO
 	help
 	  Say Y here if you want to use the old IBM PC/XT keyboard (or

trunk/drivers/input/mouse/Kconfig

@@ -14,6 +14,7 @@ if INPUT_MOUSE
 
 config MOUSE_PS2
 	tristate "PS/2 mouse"
+	depends on TTY
 	default y
 	select SERIO
 	select SERIO_LIBPS2
@@ -138,6 +139,7 @@ config MOUSE_PS2_OLPC
 
 config MOUSE_SERIAL
 	tristate "Serial mouse"
+	depends on TTY
 	select SERIO
 	help
 	  Say Y here if you have a serial (RS-232, COM port) mouse connected
@@ -262,6 +264,7 @@ config MOUSE_RISCPC
 
 config MOUSE_VSXXXAA
 	tristate "DEC VSXXX-AA/GA mouse and VSXXX-AB tablet"
+	depends on TTY
 	select SERIO
 	help
 	  Say Y (or M) if you want to use a DEC VSXXX-AA (hockey

trunk/drivers/input/serio/Kconfig

@@ -4,6 +4,7 @@
 config SERIO
 	tristate "Serial I/O support" if EXPERT || !X86
 	default y
+	depends on TTY
 	help
 	  Say Yes here if you have any input device that uses serial I/O to
 	  communicate with the system. This includes the

trunk/drivers/input/touchscreen/Kconfig

@@ -192,6 +192,8 @@ config TOUCHSCREEN_DA9052
 	  To compile this driver as a module, choose M here: the
 	  module will be called da9052_tsi.
 
+if TTY
+
 config TOUCHSCREEN_DYNAPRO
 	tristate "Dynapro serial touchscreen"
 	select SERIO
@@ -216,6 +218,8 @@ config TOUCHSCREEN_HAMPSHIRE
 	  To compile this driver as a module, choose M here: the
 	  module will be called hampshire.
 
+endif # TTY
+
 config TOUCHSCREEN_EETI
 	tristate "EETI touchscreen panel support"
 	depends on I2C
@@ -237,6 +241,7 @@ config TOUCHSCREEN_EGALAX
 
 config TOUCHSCREEN_FUJITSU
 	tristate "Fujitsu serial touchscreen"
+	depends on TTY
 	select SERIO
 	help
 	  Say Y here if you have the Fujitsu touchscreen (such as one
@@ -275,6 +280,8 @@ config TOUCHSCREEN_S3C2410
 	  To compile this driver as a module, choose M here: the
 	  module will be called s3c2410_ts.
 
+if TTY
+
 config TOUCHSCREEN_GUNZE
 	tristate "Gunze AHL-51S touchscreen"
 	select SERIO
@@ -311,6 +318,8 @@ config TOUCHSCREEN_WACOM_W8001
 	  To compile this driver as a module, choose M here: the
 	  module will be called wacom_w8001.
 
+endif # TTY
+
 config TOUCHSCREEN_WACOM_I2C
 	tristate "Wacom Tablet support (I2C)"
 	depends on I2C
@@ -369,6 +378,8 @@ config TOUCHSCREEN_MMS114
 	  To compile this driver as a module, choose M here: the
 	  module will be called mms114.
 
+if TTY
+
 config TOUCHSCREEN_MTOUCH
 	tristate "MicroTouch serial touchscreens"
 	select SERIO
@@ -393,6 +404,8 @@ config TOUCHSCREEN_INEXIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called inexio.
 
+endif # TTY
+
 config TOUCHSCREEN_INTEL_MID
 	tristate "Intel MID platform resistive touchscreen"
 	depends on INTEL_SCU_IPC
@@ -450,6 +463,7 @@ config TOUCHSCREEN_HTCPEN
 
 config TOUCHSCREEN_PENMOUNT
 	tristate "Penmount serial touchscreen"
+	depends on TTY
 	select SERIO
 	help
 	  Say Y here if you have a Penmount serial touchscreen connected to
@@ -493,6 +507,8 @@ config TOUCHSCREEN_TNETV107X
 	  To compile this driver as a module, choose M here: the
 	  module will be called tnetv107x-ts.
 
+if TTY
+
 config TOUCHSCREEN_TOUCHRIGHT
 	tristate "Touchright serial touchscreen"
 	select SERIO
@@ -517,6 +533,8 @@ config TOUCHSCREEN_TOUCHWIN
 	  To compile this driver as a module, choose M here: the
 	  module will be called touchwin.
 
+endif # TTY
+
 config TOUCHSCREEN_TI_AM335X_TSC
 	tristate "TI Touchscreen Interface"
 	depends on MFD_TI_AM335X_TSCADC
@@ -790,6 +808,8 @@ config TOUCHSCREEN_USB_EASYTOUCH
 	  Say Y here if you have an EasyTouch USB Touch controller.
 	  If unsure, say N.
 
+if TTY
+
 config TOUCHSCREEN_TOUCHIT213
 	tristate "Sahara TouchIT-213 touchscreen"
 	select SERIO
@@ -813,6 +833,8 @@ config TOUCHSCREEN_TSC_SERIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called tsc40.
 
+endif # TTY
+
 config TOUCHSCREEN_TSC2005
         tristate "TSC2005 based touchscreens"
         depends on SPI_MASTER && GENERIC_HARDIRQS

trunk/drivers/ipack/devices/Kconfig

@@ -1,6 +1,6 @@
 config SERIAL_IPOCTAL
 	tristate "IndustryPack IP-OCTAL uart support"
-	depends on IPACK_BUS
+	depends on IPACK_BUS && TTY
 	help
 	  This driver supports the IPOCTAL serial port device for the IndustryPack bus.
 	default n

trunk/drivers/isdn/Kconfig

@@ -22,6 +22,7 @@ if ISDN
 
 menuconfig ISDN_I4L
 	tristate "Old ISDN4Linux (deprecated)"
+	depends on TTY
 	---help---
 	  This driver allows you to use an ISDN adapter for networking
 	  connections and as dialin/out device.  The isdn-tty's have a built

trunk/drivers/isdn/capi/Kconfig

@@ -18,6 +18,7 @@ config CAPI_TRACE
 
 config ISDN_CAPI_MIDDLEWARE
 	bool "CAPI2.0 Middleware support"
+	depends on TTY
 	help
 	  This option will enhance the capabilities of the /dev/capi20
 	  interface.  It will provide a means of moving a data connection,

trunk/drivers/isdn/gigaset/Kconfig

@@ -1,5 +1,6 @@
 menuconfig ISDN_DRV_GIGASET
 	tristate "Siemens Gigaset support"
+	depends on TTY
 	select CRC_CCITT
 	select BITREVERSE
 	help

trunk/drivers/isdn/hardware/mISDN/Kconfig

@@ -76,6 +76,7 @@ config MISDN_NETJET
 	tristate "Support for NETJet cards"
 	depends on MISDN
 	depends on PCI
+	depends on TTY
 	select MISDN_IPAC
 	select ISDN_HDLC
 	select ISDN_I4L