---

yaml
---
r: 293510
b: refs/heads/master
c: 4eb98f4
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ca3e9297e29c48eebb010d0225ea580fbcc64c88
+refs/heads/master: 4eb98f45b77b00868dcebe4a0f00d2a36afd88c2

trunk/Documentation/sound/alsa/ALSA-Configuration.txt

@@ -860,8 +860,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     [Multiple options for each card instance]
     model	- force the model name
-    position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF,
-    		   3 = VIACOMBO, 4 = COMBO)
+    position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
     probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
     		  When the bit 8 (0x100) is set, the lower 8 bits are used
 		  as the "fixed" codec slots; i.e. the driver probes the
@@ -926,11 +925,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	    (Usually SD_LPIB register is more accurate than the
 	    position buffer.)
 
-	    position_fix=3 is specific to VIA devices.  The position
-	    of the capture stream is checked from both LPIB and POSBUF
-	    values.  position_fix=4 is a combination mode, using LPIB
-	    for playback and POSBUF for capture.
-
     NB: If you get many "azx_get_response timeout" messages at
     loading, it's likely a problem of interrupts (e.g. ACPI irq
     routing).  Try to boot with options like "pci=noacpi".  Also, you

trunk/Documentation/sound/alsa/HD-Audio-Models.txt

@@ -8,10 +8,37 @@ ALC880
   5stack-digout	5-jack in back, 2-jack in front, a SPDIF out
   6stack	6-jack in back, 2-jack in front
   6stack-digout	6-jack with a SPDIF out
+  w810		3-jack
+  z71v		3-jack (HP shared SPDIF)
+  asus		3-jack (ASUS Mobo)
+  asus-w1v	ASUS W1V
+  asus-dig	ASUS with SPDIF out
+  asus-dig2	ASUS with SPDIF out (using GPIO2)
+  uniwill	3-jack
+  fujitsu	Fujitsu Laptops (Pi1536)
+  F1734		2-jack
+  lg		LG laptop (m1 express dual)
+  lg-lw		LG LW20/LW25 laptop
+  tcl		TCL S700
+  clevo		Clevo laptops (m520G, m665n)
+  medion	Medion Rim 2150
+  test		for testing/debugging purpose, almost all controls can be
+		adjusted.  Appearing only when compiled with
+		$CONFIG_SND_DEBUG=y
+  auto		auto-config reading BIOS (default)
 
 ALC260
 ======
-  N/A
+  fujitsu	Fujitsu S7020
+  acer		Acer TravelMate
+  will		Will laptops (PB V7900)
+  replacer	Replacer 672V
+  favorit100	Maxdata Favorit 100XS
+  basic		fixed pin assignment (old default model)
+  test		for testing/debugging purpose, almost all controls can
+		adjusted.  Appearing only when compiled with
+		$CONFIG_SND_DEBUG=y
+  auto		auto-config reading BIOS (default)
 
 ALC262
 ======
@@ -43,7 +70,55 @@ ALC680
 
 ALC882/883/885/888/889
 ======================
-  N/A
+  3stack-dig	3-jack with SPDIF I/O
+  6stack-dig	6-jack digital with SPDIF I/O
+  arima		Arima W820Di1
+  targa		Targa T8, MSI-1049 T8
+  asus-a7j	ASUS A7J
+  asus-a7m	ASUS A7M
+  macpro	MacPro support
+  mb5		Macbook 5,1
+  macmini3	Macmini 3,1
+  mba21		Macbook Air 2,1
+  mbp3		Macbook Pro rev3
+  imac24	iMac 24'' with jack detection
+  imac91	iMac 9,1
+  w2jc		ASUS W2JC
+  3stack-2ch-dig	3-jack with SPDIF I/O (ALC883)
+  alc883-6stack-dig	6-jack digital with SPDIF I/O (ALC883)
+  3stack-6ch    3-jack 6-channel
+  3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
+  6stack-dig-demo  6-jack digital for Intel demo board
+  acer		Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
+  acer-aspire	Acer Aspire 9810
+  acer-aspire-4930g Acer Aspire 4930G
+  acer-aspire-6530g Acer Aspire 6530G
+  acer-aspire-7730g Acer Aspire 7730G
+  acer-aspire-8930g Acer Aspire 8930G
+  medion	Medion Laptops
+  targa-dig	Targa/MSI
+  targa-2ch-dig	Targa/MSI with 2-channel
+  targa-8ch-dig Targa/MSI with 8-channel (MSI GX620)
+  laptop-eapd   3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
+  lenovo-101e	Lenovo 101E
+  lenovo-nb0763	Lenovo NB0763
+  lenovo-ms7195-dig Lenovo MS7195
+  lenovo-sky	Lenovo Sky
+  haier-w66	Haier W66
+  3stack-hp	HP machines with 3stack (Lucknow, Samba boards)
+  6stack-dell	Dell machines with 6stack (Inspiron 530)
+  mitac		Mitac 8252D
+  clevo-m540r	Clevo M540R (6ch + digital)
+  clevo-m720	Clevo M720 laptop series
+  fujitsu-pi2515 Fujitsu AMILO Pi2515
+  fujitsu-xa3530 Fujitsu AMILO XA3530
+  3stack-6ch-intel Intel DG33* boards
+  intel-alc889a	Intel IbexPeak with ALC889A
+  intel-x58	Intel DX58 with ALC889
+  asus-p5q	ASUS P5Q-EM boards
+  mb31		MacBook 3,1
+  sony-vaio-tt  Sony VAIO TT
+  auto		auto-config reading BIOS (default)
 
 ALC861/660
 ==========

trunk/Documentation/sound/alsa/HD-Audio.txt

@@ -59,12 +59,7 @@ a case, you can change the default method via `position_fix` option.
 `position_fix=1` means to use LPIB method explicitly.
 `position_fix=2` means to use the position-buffer.
 `position_fix=3` means to use a combination of both methods, needed
-for some VIA controllers.  The capture stream position is corrected
-by comparing both LPIB and position-buffer values.
-`position_fix=4` is another combination available for all controllers,
-and uses LPIB for the playback and the position-buffer for the capture
-streams.
-0 is the default value for all other
+for some VIA and ATI controllers.  0 is the default value for all other
 controllers, the automatic check and fallback to LPIB as described in
 the above.  If you get a problem of repeated sounds, this option might
 help.

trunk/arch/arm/mach-omap1/Kconfig

@@ -37,13 +37,15 @@ comment "OMAP Board Type"
 config MACH_OMAP_INNOVATOR
 	bool "TI Innovator"
 	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
+	select OMAP_MCBSP
 	help
           TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
           have such a board.
 
 config MACH_OMAP_H2
 	bool "TI H2 Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+	select OMAP_MCBSP
     	help
 	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
 	  a board.
@@ -70,6 +72,7 @@ config MACH_HERALD
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+	select OMAP_MCBSP
     	help
 	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
           if you have such a board.

trunk/arch/arm/mach-omap1/Makefile

@@ -6,9 +6,7 @@
 obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
 obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
 
-ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
-obj-y += mcbsp.o
-endif
+obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
 obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 

trunk/arch/arm/mach-omap1/devices.c

@@ -28,6 +28,7 @@
 #include <plat/mux.h>
 #include <plat/mmc.h>
 #include <plat/omap7xx.h>
+#include <plat/mcbsp.h>
 
 #include "clock.h"
 
@@ -249,8 +250,16 @@ static struct platform_device omap_pcm = {
 	.id	= -1,
 };
 
+OMAP_MCBSP_PLATFORM_DEVICE(1);
+OMAP_MCBSP_PLATFORM_DEVICE(2);
+OMAP_MCBSP_PLATFORM_DEVICE(3);
+
 static void omap_init_audio(void)
 {
+	platform_device_register(&omap_mcbsp1);
+	platform_device_register(&omap_mcbsp2);
+	if (!cpu_is_omap7xx())
+		platform_device_register(&omap_mcbsp3);
 	platform_device_register(&omap_pcm);
 }
 

trunk/arch/arm/mach-omap1/mcbsp.c

@@ -419,6 +419,18 @@ static int __init omap1_mcbsp_init(void)
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
 
+	if (cpu_is_omap7xx())
+		omap_mcbsp_count = OMAP7XX_MCBSP_COUNT;
+	else if (cpu_is_omap15xx())
+		omap_mcbsp_count = OMAP15XX_MCBSP_COUNT;
+	else if (cpu_is_omap16xx())
+		omap_mcbsp_count = OMAP16XX_MCBSP_COUNT;
+
+	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
+								GFP_KERNEL);
+	if (!mcbsp_ptr)
+		return -ENOMEM;
+
 	if (cpu_is_omap7xx())
 		omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0,
 					OMAP7XX_MCBSP_RES_SZ,
@@ -437,7 +449,7 @@ static int __init omap1_mcbsp_init(void)
 					omap16xx_mcbsp_pdata,
 					OMAP16XX_MCBSP_COUNT);
 
-	return 0;
+	return omap_mcbsp_init();
 }
 
 arch_initcall(omap1_mcbsp_init);

trunk/arch/arm/mach-omap2/Makefile

@@ -17,9 +17,7 @@ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
 obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
 
-ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
-obj-y += mcbsp.o
-endif
+obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
 obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
 

trunk/arch/arm/mach-omap2/board-omap4panda.c

@@ -530,7 +530,7 @@ void omap4_panda_display_init(void)
 
 static void omap4_panda_init_rev(void)
 {
-	if (cpu_is_omap443x()) {
+	if (cpu_is_omap4430()) {
 		/* PandaBoard 4430 */
 		/* ASoC audio configuration */
 		panda_abe_audio_data.card_name = "PandaBoard";

trunk/arch/arm/mach-omap2/devices.c

@@ -26,6 +26,7 @@
 
 #include <plat/tc.h>
 #include <plat/board.h>
+#include <plat/mcbsp.h>
 #include <plat/mmc.h>
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
@@ -303,8 +304,29 @@ static struct platform_device omap_pcm = {
 	.id	= -1,
 };
 
+/*
+ * OMAP2420 has 2 McBSP ports
+ * OMAP2430 has 5 McBSP ports
+ * OMAP3 has 5 McBSP ports
+ * OMAP4 has 4 McBSP ports
+ */
+OMAP_MCBSP_PLATFORM_DEVICE(1);
+OMAP_MCBSP_PLATFORM_DEVICE(2);
+OMAP_MCBSP_PLATFORM_DEVICE(3);
+OMAP_MCBSP_PLATFORM_DEVICE(4);
+OMAP_MCBSP_PLATFORM_DEVICE(5);
+
 static void omap_init_audio(void)
 {
+	platform_device_register(&omap_mcbsp1);
+	platform_device_register(&omap_mcbsp2);
+	if (cpu_is_omap243x() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		platform_device_register(&omap_mcbsp3);
+		platform_device_register(&omap_mcbsp4);
+	}
+	if (cpu_is_omap243x() || cpu_is_omap34xx())
+		platform_device_register(&omap_mcbsp5);
+
 	platform_device_register(&omap_pcm);
 }
 

trunk/arch/arm/mach-omap2/mcbsp.c

@@ -34,7 +34,7 @@
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 
-/* McBSP1 internal signal muxing function for OMAP2/3 */
+/* McBSP internal signal muxing function */
 static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
 				   const char *src)
 {
@@ -65,42 +65,6 @@ static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
 	return 0;
 }
 
-/* McBSP4 internal signal muxing function for OMAP4 */
-#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX	(1 << 31)
-#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX	(1 << 30)
-static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal,
-				   const char *src)
-{
-	u32 v;
-
-	/*
-	 * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR
-	 * mux) is used */
-	v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
-
-	if (!strcmp(signal, "clkr")) {
-		if (!strcmp(src, "clkr"))
-			v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
-		else if (!strcmp(src, "clkx"))
-			v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
-		else
-			return -EINVAL;
-	} else if (!strcmp(signal, "fsr")) {
-		if (!strcmp(src, "fsr"))
-			v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
-		else if (!strcmp(src, "fsx"))
-			v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
-		else
-			return -EINVAL;
-	} else {
-		return -EINVAL;
-	}
-
-	omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
-
-	return 0;
-}
-
 /* McBSP CLKS source switching function */
 static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
 				   const char *src)
@@ -182,15 +146,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		pdata->has_ccr = true;
 	}
 	pdata->set_clk_src = omap2_mcbsp_set_clk_src;
-
-	/* On OMAP2/3 the McBSP1 port has 6 pin configuration */
-	if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4)
+	if (id == 1)
 		pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
 
-	/* On OMAP4 the McBSP4 port has 6 pin configuration */
-	if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4)
-		pdata->mux_signal = omap4_mcbsp4_mux_rx_clk;
-
 	if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
 		if (id == 2)
 			/* The FIFO has 1024 + 256 locations */
@@ -222,13 +180,19 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 					name, oh->name);
 		return PTR_ERR(pdev);
 	}
+	omap_mcbsp_count++;
 	return 0;
 }
 
 static int __init omap2_mcbsp_init(void)
 {
 	omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL);
 
-	return 0;
+	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
+								GFP_KERNEL);
+	if (!mcbsp_ptr)
+		return -ENOMEM;
+
+	return omap_mcbsp_init();
 }
 arch_initcall(omap2_mcbsp_init);

trunk/arch/arm/plat-omap/Kconfig

@@ -110,6 +110,14 @@ config OMAP_MUX_WARNINGS
 	  to change the pin multiplexing setup.	 When there are no warnings
 	  printed, it's safe to deselect OMAP_MUX for your product.
 
+config OMAP_MCBSP
+	bool "McBSP support"
+	depends on ARCH_OMAP
+	default y
+	help
+	  Say Y here if you want support for the OMAP Multichannel
+	  Buffered Serial Port.
+
 config OMAP_MBOX_FWK
 	tristate "Mailbox framework support"
 	depends on ARCH_OMAP

trunk/arch/arm/plat-omap/Makefile

@@ -17,6 +17,8 @@ obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
 obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
 obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
 
+obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o