Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 …

…into devel-stable

arch/arm/Kconfig

@@ -1669,6 +1669,12 @@ if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
+config CPU_FREQ_IMX
+	tristate "CPUfreq driver for i.MX CPUs"
+	depends on ARCH_MXC && CPU_FREQ
+	help
+	  This enables the CPUfreq driver for i.MX CPUs.
+
 config CPU_FREQ_SA1100
 	bool
 

arch/arm/configs/mx51_defconfig

@@ -82,6 +82,7 @@ CONFIG_FEC=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_EVBUG=m
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -23,16 +23,20 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
+#include <mach/mmc.h>
 
 #include "devices-imx27.h"
 #include "devices.h"
 
+#define SD1_EN_GPIO (GPIO_PORTB + 25)
+
 static const int mx27pdk_pins[] __initconst = {
 	/* UART1 */
 	PE12_PF_UART1_TXD,
@@ -58,6 +62,14 @@ static const int mx27pdk_pins[] __initconst = {
 	PD15_AOUT_FEC_COL,
 	PD16_AIN_FEC_TX_ER,
 	PF23_AIN_FEC_TX_EN,
+	/* SDHC1 */
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT,
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -85,13 +97,39 @@ static struct matrix_keymap_data mx27_3ds_keymap_data = {
 	.keymap_size	= ARRAY_SIZE(mx27_3ds_keymap),
 };
 
+static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+				void *data)
+{
+	return request_irq(IRQ_GPIOB(26), detect_irq, IRQF_TRIGGER_FALLING |
+			IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
+}
+
+static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOB(26), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mx27_3ds_sdhc1_init,
+	.exit = mx27_3ds_sdhc1_exit,
+};
+
+static void mx27_3ds_sdhc1_enable_level_translator(void)
+{
+	/* Turn on TXB0108 OE pin */
+	gpio_request(SD1_EN_GPIO, "sd1_enable");
+	gpio_direction_output(SD1_EN_GPIO, 1);
+}
+
 static void __init mx27pdk_init(void)
 {
 	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
 		"mx27pdk");
+	mx27_3ds_sdhc1_enable_level_translator();
 	imx27_add_imx_uart0(&uart_pdata);
 	imx27_add_fec(NULL);
 	mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
 }
 
 static void __init mx27pdk_timer_init(void)

arch/arm/mach-mx25/Kconfig

@@ -6,6 +6,7 @@ config MACH_MX25_3DS
 	bool "Support MX25PDK (3DS) Platform"
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_ESDHC
 
 config MACH_EUKREA_CPUIMX25
 	bool "Support Eukrea CPUIMX25 Platform"

arch/arm/mach-mx25/mach-mx25_3ds.c

@@ -96,6 +96,14 @@ static struct pad_desc mx25pdk_pads[] = {
 	MX25_PAD_KPP_COL1__KPP_COL1,
 	MX25_PAD_KPP_COL2__KPP_COL2,
 	MX25_PAD_KPP_COL3__KPP_COL3,
+
+	/* SD1 */
+	MX25_PAD_SD1_CMD__SD1_CMD,
+	MX25_PAD_SD1_CLK__SD1_CLK,
+	MX25_PAD_SD1_DATA0__SD1_DATA0,
+	MX25_PAD_SD1_DATA1__SD1_DATA1,
+	MX25_PAD_SD1_DATA2__SD1_DATA2,
+	MX25_PAD_SD1_DATA3__SD1_DATA3,
 };
 
 static const struct fec_platform_data mx25_fec_pdata __initconst = {
@@ -193,6 +201,8 @@ static void __init mx25pdk_init(void)
 	mx25pdk_fec_reset();
 	imx25_add_fec(&mx25_fec_pdata);
 	mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data);
+
+	imx25_add_esdhc(0, NULL);
 }
 
 static void __init mx25pdk_timer_init(void)

arch/arm/mach-mx3/Kconfig

@@ -143,8 +143,10 @@ config MACH_ARMADILLO5X0
 config MACH_MX35_3DS
 	bool "Support MX35PDK platform"
 	select ARCH_MX35
+	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_ESDHC
 	default n
 	help
 	  Include support for MX35PDK platform. This includes specific

arch/arm/mach-mx3/devices.c

@@ -72,24 +72,24 @@ struct platform_device mxc_w1_master_device = {
 #ifdef CONFIG_ARCH_MX31
 static struct resource mxcsdhc0_resources[] = {
 	{
-		.start = MMC_SDHC1_BASE_ADDR,
-		.end = MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+		.start = MX31_MMC_SDHC1_BASE_ADDR,
+		.end = MX31_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_MMC_SDHC1,
-		.end = MXC_INT_MMC_SDHC1,
+		.start = MX31_INT_MMC_SDHC1,
+		.end = MX31_INT_MMC_SDHC1,
 		.flags = IORESOURCE_IRQ,
 	},
 };
 
 static struct resource mxcsdhc1_resources[] = {
 	{
-		.start = MMC_SDHC2_BASE_ADDR,
-		.end = MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+		.start = MX31_MMC_SDHC2_BASE_ADDR,
+		.end = MX31_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_MMC_SDHC2,
-		.end = MXC_INT_MMC_SDHC2,
+		.start = MX31_INT_MMC_SDHC2,
+		.end = MX31_INT_MMC_SDHC2,
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/arm/mach-mx3/mach-mx31_3ds.c

@@ -38,39 +38,9 @@
 #include "devices-imx31.h"
 #include "devices.h"
 
-/* Definitions for components on the Debug board */
-
-/* Base address of CPLD controller on the Debug board */
-#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR		MX3x_CS5_BASE_ADDR
-
-/* CPLD config and interrupt base address */
-#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
-
-/* status, interrupt */
-#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
-#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
-#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
-#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
-/* CPLD code version */
-#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
-
 /* CPLD IRQ line for external uart, external ethernet etc */
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
 
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
 /*
  * This file contains the board-specific initialization routines.
  */
@@ -272,7 +242,7 @@ static void __init mxc_board_init(void)
 	imx31_add_imx_uart0(&uart_pdata);
 	imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
 
-	imx31_add_spi_imx0(&spi1_pdata);
+	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(mx31_3ds_spi_devs,
 						ARRAY_SIZE(mx31_3ds_spi_devs));
 
@@ -281,9 +251,9 @@ static void __init mxc_board_init(void)
 	mx31_3ds_usbotg_init();
 	mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
 
-	if (!mxc_expio_init(CS5_BASE_ADDR, EXPIO_PARENT_INT))
-		printk(KERN_WARNING "Init of the debugboard failed, all "
-				    "devices on the board are unusable.\n");
+	if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		printk(KERN_WARNING "Init of the debug board failed, all "
+				    "devices on the debug board are unusable.\n");
 }
 
 static void __init mx31_3ds_timer_init(void)

arch/arm/mach-mx3/mach-mx35_3ds.c

@@ -38,11 +38,15 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
+#include <mach/irqs.h>
+#include <mach/3ds_debugboard.h>
 #include <mach/mxc_ehci.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
 
+#define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
+
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -108,6 +112,13 @@ static struct pad_desc mx35pdk_pads[] = {
 	/* USBH1 */
 	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
 	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
+	/* SDCARD */
+	MX35_PAD_SD1_CMD__ESDHC1_CMD,
+	MX35_PAD_SD1_CLK__ESDHC1_CLK,
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 };
 
 /* OTG config */
@@ -140,6 +151,11 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxc_usbh1, &usb_host_pdata);
 
 	imx35_add_mxc_nand(&mx35pdk_nand_board_info);
+	imx35_add_esdhc(0, NULL);
+
+	if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		pr_warn("Init of the debugboard failed, all "
+				"devices on the debugboard are unusable.\n");
 }
 
 static void __init mx35pdk_timer_init(void)

arch/arm/mach-mx5/Kconfig

@@ -6,13 +6,15 @@ config ARCH_MX51
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
+	select ARCH_HAS_CPUFREQ
 
 comment "MX5 platforms:"
 
 config MACH_MX51_BABBAGE
 	bool "Support MX51 BABBAGE platforms"
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_ESDHC
 	help
 	  Include support for MX51 Babbage platform, also known as MX51EVK in
 	  u-boot. This includes specific configurations for the board and its

arch/arm/mach-mx5/Makefile

@@ -5,6 +5,7 @@
 # Object file lists.
 obj-y   := cpu.o mm.o clock-mx51.o devices.o
 
+obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
 obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
 obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o