---

yaml
---
r: 26799
b: refs/heads/master
c: c3fb041
h: refs/heads/master
i:
  26797: 3f0314e
  26795: 46883ac
  26791: 2163552
  26783: 3f03816
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: b0c51b7d650d5109c8e71e19d5e7ce9b71af7dff
+refs/heads/master: c3fb04162a1c8ddcf6caa6e19020da3f0fd23103

trunk/Documentation/feature-removal-schedule.txt

@@ -57,15 +57,6 @@ Who:	Jody McIntyre <scjody@steamballoon.com>
 
 ---------------------------
 
-What:	sbp2: module parameter "force_inquiry_hack"
-When:	July 2006
-Why:	Superceded by parameter "workarounds". Both parameters are meant to be
-	used ad-hoc and for single devices only, i.e. not in modprobe.conf,
-	therefore the impact of this feature replacement should be low.
-Who:	Stefan Richter <stefanr@s5r6.in-berlin.de>
-
----------------------------
-
 What:	Video4Linux API 1 ioctls and video_decoder.h from Video devices.
 When:	July 2006
 Why:	V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6

trunk/Documentation/watchdog/watchdog-api.txt

@@ -36,9 +36,6 @@ timeout or margin.  The simplest way to ping the watchdog is to write
 some data to the device.  So a very simple watchdog daemon would look
 like this:
 
-#include <stdlib.h>
-#include <fcntl.h>
-
 int main(int argc, const char *argv[]) {
 	int fd=open("/dev/watchdog",O_WRONLY);
 	if (fd==-1) {

trunk/arch/arm/mach-s3c2410/sleep.S

@@ -59,8 +59,7 @@ ENTRY(s3c2410_cpu_suspend)
 	mrc	p15, 0, r5, c13, c0, 0	@ PID
 	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r7, c2, c0, 0	@ translation table base address
-	mrc	p15, 0, r8, c2, c0, 0	@ auxiliary control register
-	mrc	p15, 0, r9, c1, c0, 0	@ control register
+	mrc	p15, 0, r8, c1, c0, 0	@ control register
 
 	stmia	r0, { r4 - r13 }
 
@@ -165,15 +164,14 @@ ENTRY(s3c2410_cpu_resume)
 	mcr	p15, 0, r5, c13, c0, 0		@ PID
 	mcr	p15, 0, r6, c3, c0, 0		@ Domain ID
 	mcr	p15, 0, r7, c2, c0, 0		@ translation table base
-	mcr	p15, 0, r8, c1, c1, 0		@ auxilliary control
 
 #ifdef CONFIG_DEBUG_RESUME
 	mov	r3, #'R'
 	strb	r3, [ r2, #S3C2410_UTXH ]
 #endif
 
 	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r9, c1, c0, 0		@ turn on MMU, etc
+	mcr	p15, 0, r8, c1, c0, 0		@ turn on MMU, etc
 	nop					@ second-to-last before mmu
 	mov	pc, r2				@ go back to virtual address
 

trunk/arch/ia64/configs/sn2_defconfig

@@ -134,7 +134,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
 CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=10
+CONFIG_NODES_SHIFT=8
 CONFIG_VIRTUAL_MEM_MAP=y
 CONFIG_HOLES_IN_ZONE=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
@@ -1159,7 +1159,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_MUTEXES is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set

trunk/arch/ia64/kernel/iosapic.c

@@ -416,7 +416,7 @@ iosapic_end_level_irq (unsigned int irq)
 	ia64_vector vec = irq_to_vector(irq);
 	struct iosapic_rte_info *rte;
 
-	move_native_irq(irq);
+	move_irq(irq);
 	list_for_each_entry(rte, &iosapic_intr_info[vec].rtes, rte_list)
 		iosapic_eoi(rte->addr, vec);
 }
@@ -458,7 +458,7 @@ iosapic_ack_edge_irq (unsigned int irq)
 {
 	irq_desc_t *idesc = irq_descp(irq);
 
-	move_native_irq(irq);
+	move_irq(irq);
 	/*
 	 * Once we have recorded IRQ_PENDING already, we can mask the
 	 * interrupt for real. This prevents IRQ storms from unhandled

trunk/arch/ia64/kernel/irq.c

@@ -101,6 +101,7 @@ void set_irq_affinity_info (unsigned int irq, int hwid, int redir)
 
 	if (irq < NR_IRQS) {
 		irq_affinity[irq] = mask;
+		set_irq_info(irq, mask);
 		irq_redir[irq] = (char) (redir & 0xff);
 	}
 }

trunk/drivers/char/watchdog/i8xx_tco.c

@@ -33,6 +33,11 @@
  *	82801E   (C-ICH)  : document number 273599-001, 273645-002,
  *	82801EB  (ICH5)   : document number 252516-001, 252517-003,
  *	82801ER  (ICH5R)  : document number 252516-001, 252517-003,
+ *	82801FB  (ICH6)   : document number 301473-002, 301474-007,
+ *	82801FR  (ICH6R)  : document number 301473-002, 301474-007,
+ *	82801FBM (ICH6-M) : document number 301473-002, 301474-007,
+ *	82801FW  (ICH6W)  : document number 301473-001, 301474-007,
+ *	82801FRW (ICH6RW) : document number 301473-001, 301474-007
  *
  *  20000710 Nils Faerber
  *	Initial Version 0.01
@@ -61,10 +66,6 @@
  *  20050807 Wim Van Sebroeck <wim@iguana.be>
  *	0.08 Make sure that the watchdog is only "armed" when started.
  *	     (Kernel Bug 4251)
- *  20060416 Wim Van Sebroeck <wim@iguana.be>
- *	0.09 Remove support for the ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW and
- *	     ICH7 chipsets. (See Kernel Bug 6031 - other code will support these
- *	     chipsets)
  */
 
 /*
@@ -89,7 +90,7 @@
 #include "i8xx_tco.h"
 
 /* Module and version information */
-#define TCO_VERSION "0.09"
+#define TCO_VERSION "0.08"
 #define TCO_MODULE_NAME "i8xx TCO timer"
 #define TCO_DRIVER_NAME   TCO_MODULE_NAME ", v" TCO_VERSION
 #define PFX TCO_MODULE_NAME ": "
@@ -390,6 +391,11 @@ static struct pci_device_id i8xx_tco_pci_tbl[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,	PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,	PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,	PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2,	PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,	PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0, },			/* End of list */
 };

trunk/drivers/char/watchdog/s3c2410_wdt.c

@@ -423,12 +423,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	if (tmr_atboot && started == 0) {
 		printk(KERN_INFO PFX "Starting Watchdog Timer\n");
 		s3c2410wdt_start();
-	} else if (!tmr_atboot) {
-		/* if we're not enabling the watchdog, then ensure it is
-		 * disabled if it has been left running from the bootloader
-		 * or other source */
-
-		s3c2410wdt_stop();
 	}
 
 	return 0;

trunk/drivers/char/watchdog/sc1200wdt.c

@@ -377,7 +377,7 @@ static int __init sc1200wdt_init(void)
 {
 	int ret;
 
-	printk("%s\n", banner);
+	printk(banner);
 
 	spin_lock_init(&sc1200wdt_lock);
 	sema_init(&open_sem, 1);

trunk/drivers/ieee1394/ohci1394.c

@@ -553,7 +553,7 @@ static void ohci_initialize(struct ti_ohci *ohci)
 	 * register content.
 	 * To actually enable physical responses is the job of our interrupt
 	 * handler which programs the physical request filter. */
-	reg_write(ohci, OHCI1394_PhyUpperBound, 0x01000000);
+	reg_write(ohci, OHCI1394_PhyUpperBound, 0xffff0000);
 
 	DBGMSG("physUpperBoundOffset=%08x",
 	       reg_read(ohci, OHCI1394_PhyUpperBound));