---

yaml
---
r: 98459
b: refs/heads/master
c: 19fd426
h: refs/heads/master
i:
  98457: fc94422
  98455: 52b825f
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e8183c2452041326c95258ecc7865b6fcd91c730
+refs/heads/master: 19fd426a18b48a0446ba4b54ac66264916dcb7f3

trunk/.gitignore

@@ -26,6 +26,7 @@ tags
 TAGS
 vmlinux*
 !vmlinux.lds.S
+!vmlinux.lds.h
 System.map
 Module.markers
 Module.symvers

trunk/Documentation/cpusets.txt

@@ -542,7 +542,7 @@ otherwise initial value -1 that indicates the cpuset has no request.
    2  : search cores in a package.
    3  : search cpus in a node [= system wide on non-NUMA system]
  ( 4  : search nodes in a chunk of node [on NUMA system] )
- ( 5~ : search system wide [on NUMA system])
+ ( 5  : search system wide [on NUMA system] )
 
 This file is per-cpuset and affect the sched domain where the cpuset
 belongs to.  Therefore if the flag 'sched_load_balance' of a cpuset

trunk/Documentation/hwmon/sysfs-interface

@@ -2,17 +2,12 @@ Naming and data format standards for sysfs files
 ------------------------------------------------
 
 The libsensors library offers an interface to the raw sensors data
-through the sysfs interface. See libsensors documentation and source for
-further information. As of writing this document, libsensors
-(from lm_sensors 2.8.3) is heavily chip-dependent. Adding or updating
-support for any given chip requires modifying the library's code.
-This is because libsensors was written for the procfs interface
-older kernel modules were using, which wasn't standardized enough.
-Recent versions of libsensors (from lm_sensors 2.8.2 and later) have
-support for the sysfs interface, though.
-
-The new sysfs interface was designed to be as chip-independent as
-possible.
+through the sysfs interface. Since lm-sensors 3.0.0, libsensors is
+completely chip-independent. It assumes that all the kernel drivers
+implement the standard sysfs interface described in this document.
+This makes adding or updating support for any given chip very easy, as
+libsensors, and applications using it, do not need to be modified.
+This is a major improvement compared to lm-sensors 2.
 
 Note that motherboards vary widely in the connections to sensor chips.
 There is no standard that ensures, for example, that the second
@@ -35,19 +30,17 @@ access this data in a simple and consistent way. That said, such programs
 will have to implement conversion, labeling and hiding of inputs. For
 this reason, it is still not recommended to bypass the library.
 
-If you are developing a userspace application please send us feedback on
-this standard.
-
-Note that this standard isn't completely established yet, so it is subject
-to changes. If you are writing a new hardware monitoring driver those
-features can't seem to fit in this interface, please contact us with your
-extension proposal. Keep in mind that backward compatibility must be
-preserved.
-
 Each chip gets its own directory in the sysfs /sys/devices tree.  To
 find all sensor chips, it is easier to follow the device symlinks from
 /sys/class/hwmon/hwmon*.
 
+Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes
+in the "physical" device directory. Since lm-sensors 3.0.1, attributes found
+in the hwmon "class" device directory are also supported. Complex drivers
+(e.g. drivers for multifunction chips) may want to use this possibility to
+avoid namespace pollution. The only drawback will be that older versions of
+libsensors won't support the driver in question.
+
 All sysfs values are fixed point numbers.
 
 There is only one value per file, unlike the older /proc specification.

trunk/MAINTAINERS

@@ -4431,10 +4431,10 @@ M:	johnpol@2ka.mipt.ru
 S:	Maintained
 
 W83791D HARDWARE MONITORING DRIVER
-P:	Charles Spirakis
-M:	bezaur@gmail.com
+P:	Marc Hulsman
+M:	m.hulsman@tudelft.nl
 L:	lm-sensors@lm-sensors.org
-S:	Odd Fixes
+S:	Maintained
 
 W83793 HARDWARE MONITORING DRIVER
 P:	Rudolf Marek

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 26
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*

trunk/arch/alpha/Makefile

@@ -13,6 +13,7 @@ NM := $(NM) -B
 LDFLAGS_vmlinux	:= -static -N #-relax
 CHECKFLAGS	+= -D__alpha__ -m64
 cflags-y	:= -pipe -mno-fp-regs -ffixed-8 -msmall-data
+cflags-y	+= $(call cc-option, -fno-jump-tables)
 
 cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4
 cpuflags-$(CONFIG_ALPHA_EV5)		:= -mcpu=ev5

trunk/arch/alpha/kernel/core_t2.c

@@ -74,6 +74,8 @@
 # define DBG(args)
 #endif
 
+DEFINE_SPINLOCK(t2_hae_lock);
+
 static volatile unsigned int t2_mcheck_any_expected;
 static volatile unsigned int t2_mcheck_last_taken;
 

trunk/arch/alpha/kernel/pci.c

@@ -71,6 +71,23 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_i
 static void __init
 quirk_cypress(struct pci_dev *dev)
 {
+	/* The Notorious Cy82C693 chip.  */
+
+	/* The generic legacy mode IDE fixup in drivers/pci/probe.c
+	   doesn't work correctly with the Cypress IDE controller as
+	   it has non-standard register layout.  Fix that.  */
+	if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
+		dev->resource[2].start = dev->resource[3].start = 0;
+		dev->resource[2].end = dev->resource[3].end = 0;
+		dev->resource[2].flags = dev->resource[3].flags = 0;
+		if (PCI_FUNC(dev->devfn) == 2) {
+			dev->resource[0].start = 0x170;
+			dev->resource[0].end = 0x177;
+			dev->resource[1].start = 0x376;
+			dev->resource[1].end = 0x376;
+		}
+	}
+
 	/* The Cypress bridge responds on the PCI bus in the address range
 	   0xffff0000-0xffffffff (conventional x86 BIOS ROM).  There is no
 	   way to turn this off.  The bridge also supports several extended

trunk/arch/alpha/kernel/traps.c

@@ -447,7 +447,7 @@ struct unaligned_stat {
 
 
 /* Macro for exception fixup code to access integer registers.  */
-#define una_reg(r)  (regs->regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
+#define una_reg(r)  (_regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
 
 
 asmlinkage void
@@ -456,6 +456,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 {
 	long error, tmp1, tmp2, tmp3, tmp4;
 	unsigned long pc = regs->pc - 4;
+	unsigned long *_regs = regs->regs;
 	const struct exception_table_entry *fixup;
 
 	unaligned[0].count++;

trunk/arch/ia64/Makefile

@@ -57,6 +57,7 @@ core-$(CONFIG_IA64_GENERIC) 	+= arch/ia64/dig/
 core-$(CONFIG_IA64_HP_ZX1)	+= arch/ia64/dig/
 core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
 core-$(CONFIG_IA64_SGI_SN2)	+= arch/ia64/sn/
+core-$(CONFIG_IA64_SGI_UV)	+= arch/ia64/uv/
 core-$(CONFIG_KVM) 		+= arch/ia64/kvm/
 
 drivers-$(CONFIG_PCI)		+= arch/ia64/pci/

trunk/arch/ia64/kernel/perfmon.c

@@ -1864,11 +1864,6 @@ pfm_flush(struct file *filp, fl_owner_t id)
 	 * invoked after, it will find an empty queue and no
 	 * signal will be sent. In both case, we are safe
 	 */
-	if (filp->f_flags & FASYNC) {
-		DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue));
-		pfm_do_fasync (-1, filp, ctx, 0);
-	}
-
 	PROTECT_CTX(ctx, flags);
 
 	state     = ctx->ctx_state;
@@ -1999,6 +1994,11 @@ pfm_close(struct inode *inode, struct file *filp)
 		return -EBADF;
 	}
 
+	if (filp->f_flags & FASYNC) {
+		DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue));
+		pfm_do_fasync(-1, filp, ctx, 0);
+	}
+
 	PROTECT_CTX(ctx, flags);
 
 	state     = ctx->ctx_state;

trunk/arch/ia64/kernel/sal.c

@@ -252,11 +252,10 @@ check_sal_cache_flush (void)
 	local_irq_save(flags);
 
 	/*
-	 * Schedule a timer interrupt, wait until it's reported, and see if
-	 * SAL_CACHE_FLUSH drops it.
+	 * Send ourselves a timer interrupt, wait until it's reported, and see
+	 * if SAL_CACHE_FLUSH drops it.
 	 */
-	ia64_set_itv(IA64_TIMER_VECTOR);
-	ia64_set_itm(ia64_get_itc() + 1000);
+	platform_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0);
 
 	while (!ia64_get_irr(IA64_TIMER_VECTOR))
 		cpu_relax();

trunk/arch/ia64/sn/kernel/sn2/sn2_smp.c

@@ -512,6 +512,8 @@ static ssize_t sn2_ptc_proc_write(struct file *file, const char __user *user, si
 	int cpu;
 	char optstr[64];
 
+	if (count > sizeof(optstr))
+		return -EINVAL;
 	if (copy_from_user(optstr, user, count))
 		return -EFAULT;
 	optstr[count - 1] = '\0';

trunk/arch/ia64/uv/kernel/setup.c

@@ -17,6 +17,9 @@
 DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
 
+#ifdef CONFIG_IA64_SGI_UV
+int sn_prom_type;
+#endif
 
 struct redir_addr {
 	unsigned long redirect;
@@ -64,6 +67,15 @@ void __init uv_setup(char **cmdline_p)
 		m_n_config.s.m_skt = 37;
 		m_n_config.s.n_skt = 0;
 		mmr_base = 0;
+#if 0
+		/* Need BIOS calls - TDB */
+		if (!ia64_sn_is_fake_prom())
+			sn_prom_type = 1;
+		else
+#endif
+			sn_prom_type = 2;
+		printk(KERN_INFO "Running on medusa with %s PROM\n",
+					(sn_prom_type == 1) ? "real" : "fake");
 	} else {
 		get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
 		node_id.v = uv_read_local_mmr(UVH_NODE_ID);

trunk/arch/mips/Makefile

@@ -538,19 +538,19 @@ cflags-$(CONFIG_SIBYTE_BCM1x80)	+= -Iinclude/asm-mips/mach-sibyte \
 # Sibyte SWARM board
 # Sibyte BCM91x80 (BigSur) board
 #
-libs-$(CONFIG_SIBYTE_CARMEL)	+= arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CARMEL)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_CARMEL)	:= 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_CRHINE)	+= arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CRHINE)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_CRHINE)	:= 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_CRHONE)	+= arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CRHONE)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_CRHONE)	:= 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_RHONE)	+= arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_RHONE)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_RHONE)	:= 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_SENTOSA)	+= arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_SENTOSA)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_SENTOSA)	:= 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_SWARM)	+= arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_SWARM)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_SWARM)	:= 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_BIGSUR)	+= arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_BIGSUR)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_BIGSUR)	:= 0xffffffff80100000
 
 #
@@ -565,7 +565,11 @@ load-$(CONFIG_BCM47XX)		:= 0xffffffff80001000
 #
 core-$(CONFIG_SNI_RM)		+= arch/mips/sni/
 cflags-$(CONFIG_SNI_RM)		+= -Iinclude/asm-mips/mach-rm
+ifdef CONFIG_CPU_LITTLE_ENDIAN
 load-$(CONFIG_SNI_RM)		+= 0xffffffff80600000
+else
+load-$(CONFIG_SNI_RM)		+= 0xffffffff80030000
+endif
 all-$(CONFIG_SNI_RM)		:= vmlinux.ecoff
 
 #

trunk/arch/mips/au1000/common/platform.c

@@ -165,12 +165,12 @@ static struct resource au1xxx_usb_gdt_resources[] = {
 static struct resource au1xxx_mmc_resources[] = {
 	[0] = {
 		.start          = SD0_PHYS_ADDR,
-		.end            = SD0_PHYS_ADDR + 0x40,
+		.end            = SD0_PHYS_ADDR + 0x7ffff,
 		.flags          = IORESOURCE_MEM,
 	},
 	[1] = {
 		.start		= SD1_PHYS_ADDR,
-		.end 		= SD1_PHYS_ADDR + 0x40,
+		.end 		= SD1_PHYS_ADDR + 0x7ffff,
 		.flags		= IORESOURCE_MEM,
 	},
 	[2] = {