Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input

* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: (26 commits)
  Input: add support for Braille devices
  Input: synaptics - limit rate to 40pps on Toshiba Protege M300
  Input: gamecon - add SNES mouse support
  Input: make modalias code respect allowed buffer size
  Input: convert /proc handling to seq_file
  Input: limit attributes' output to PAGE_SIZE
  Input: gameport - fix memory leak
  Input: serio - fix memory leak
  Input: zaurus keyboard driver updates
  Input: i8042 - fix logic around pnp_register_driver()
  Input: ns558 - fix logic around pnp_register_driver()
  Input: pcspkr - separate device and driver registration
  Input: atkbd - allow disabling on X86_PC (if EMBEDDED)
  Input: atkbd - disable softrepeat for dumb keyboards
  Input: atkbd - fix complaints about 'releasing unknown key 0x7f'
  Input: HID - fix duplicate key mapping for Logitech UltraX remote
  Input: use kzalloc() throughout the code
  Input: fix input_free_device() implementation
  Input: initialize serio and gameport at subsystem level
  Input: uinput - semaphore to mutex conversion
  ...

Documentation/input/joystick-parport.txt

@@ -36,12 +36,12 @@ with them.
 
   All NES and SNES use the same synchronous serial protocol, clocked from
 the computer's side (and thus timing insensitive). To allow up to 5 NES
-and/or SNES gamepads connected to the parallel port at once, the output
-lines of the parallel port are shared, while one of 5 available input lines
-is assigned to each gamepad.
+and/or SNES gamepads and/or SNES mice connected to the parallel port at once,
+the output lines of the parallel port are shared, while one of 5 available
+input lines is assigned to each gamepad.
 
   This protocol is handled by the gamecon.c driver, so that's the one
-you'll use for NES and SNES gamepads.
+you'll use for NES, SNES gamepads and SNES mice.
 
   The main problem with PC parallel ports is that they don't have +5V power
 source on any of their pins. So, if you want a reliable source of power
@@ -106,7 +106,7 @@ A, Turbo B, Select and Start, and is connected through 5 wires, then it is
 either a NES or NES clone and will work with this connection. SNES gamepads
 also use 5 wires, but have more buttons. They will work as well, of course.
 
-Pinout for NES gamepads                 Pinout for SNES gamepads
+Pinout for NES gamepads                 Pinout for SNES gamepads and mice
 
 	   +----> Power                   +-----------------------\
 	   |                            7 | o  o  o  o |  x  x  o  | 1
@@ -454,6 +454,7 @@ uses the following kernel/module command line:
 	  6  | N64 pad
 	  7  | Sony PSX controller
 	  8  | Sony PSX DDR controller
+	  9  | SNES mouse
 
   The exact type of the PSX controller type is autoprobed when used so
 hot swapping should work (but is not recomended).

arch/alpha/kernel/setup.c

@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/ioport.h>
+#include <linux/platform_device.h>
 #include <linux/bootmem.h>
 #include <linux/pci.h>
 #include <linux/seq_file.h>
@@ -1478,3 +1479,20 @@ alpha_panic_event(struct notifier_block *this, unsigned long event, void *ptr)
 #endif
         return NOTIFY_DONE;
 }
+
+static __init int add_pcspkr(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("pcspkr", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+device_initcall(add_pcspkr);

arch/i386/kernel/setup.c

@@ -34,6 +34,7 @@
 #include <linux/initrd.h>
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
+#include <linux/platform_device.h>
 #include <linux/console.h>
 #include <linux/mca.h>
 #include <linux/root_dev.h>
@@ -1547,6 +1548,23 @@ void __init setup_arch(char **cmdline_p)
 #endif
 }
 
+static __init int add_pcspkr(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("pcspkr", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+device_initcall(add_pcspkr);
+
 #include "setup_arch_post.h"
 /*
  * Local Variables:

arch/mips/Kconfig

@@ -233,6 +233,7 @@ config MACH_JAZZ
 	select ARC32
 	select ARCH_MAY_HAVE_PC_FDC
 	select GENERIC_ISA_DMA
+	select I8253
 	select I8259
 	select ISA
 	select SYS_HAS_CPU_R4X00
@@ -530,6 +531,7 @@ config QEMU
 	select DMA_COHERENT
 	select GENERIC_ISA_DMA
 	select HAVE_STD_PC_SERIAL_PORT
+	select I8253
 	select I8259
 	select ISA
 	select SWAP_IO_SPACE
@@ -714,6 +716,7 @@ config SNI_RM200_PCI
 	select HAVE_STD_PC_SERIAL_PORT
 	select HW_HAS_EISA
 	select HW_HAS_PCI
+	select I8253
 	select I8259
 	select ISA
 	select SYS_HAS_CPU_R4X00
@@ -1721,6 +1724,9 @@ config MMU
 	bool
 	default y
 
+config I8253
+	bool
+
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"

arch/mips/kernel/Makefile

@@ -59,6 +59,8 @@ obj-$(CONFIG_PROC_FS)		+= proc.o
 
 obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
 
+obj-$(CONFIG_I8253)		+= i8253.o
+
 CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
 
 EXTRA_AFLAGS := $(CFLAGS)

arch/mips/kernel/i8253.c

@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2006 IBM Corporation
+ *
+ * Implements device information for i8253 timer chip
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation
+ */
+
+#include <linux/platform_device.h>
+
+static __init int add_pcspkr(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("pcspkr", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+device_initcall(add_pcspkr);

arch/powerpc/kernel/setup-common.c

@@ -21,6 +21,7 @@
 #include <linux/reboot.h>
 #include <linux/delay.h>
 #include <linux/initrd.h>
+#include <linux/platform_device.h>
 #include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/ioport.h>
@@ -462,6 +463,29 @@ static int __init early_xmon(char *p)
 early_param("xmon", early_xmon);
 #endif
 
+static __init int add_pcspkr(void)
+{
+	struct device_node *np;
+	struct platform_device *pd;
+	int ret;
+
+	np = of_find_compatible_node(NULL, NULL, "pnpPNP,100");
+	of_node_put(np);
+	if (!np)
+		return -ENODEV;
+
+	pd = platform_device_alloc("pcspkr", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+device_initcall(add_pcspkr);
+
 void probe_machine(void)
 {
 	extern struct machdep_calls __machine_desc_start;

drivers/Makefile

@@ -25,9 +25,6 @@ obj-$(CONFIG_CONNECTOR)		+= connector/
 obj-$(CONFIG_FB_I810)           += video/i810/
 obj-$(CONFIG_FB_INTEL)          += video/intelfb/
 
-# we also need input/serio early so serio bus is initialized by the time
-# serial drivers start registering their serio ports
-obj-$(CONFIG_SERIO)		+= input/serio/
 obj-y				+= serial/
 obj-$(CONFIG_PARPORT)		+= parport/
 obj-y				+= base/ block/ misc/ mfd/ net/ media/
@@ -53,6 +50,7 @@ obj-$(CONFIG_TC)		+= tc/
 obj-$(CONFIG_USB)		+= usb/
 obj-$(CONFIG_PCI)		+= usb/
 obj-$(CONFIG_USB_GADGET)	+= usb/gadget/
+obj-$(CONFIG_SERIO)		+= input/serio/
 obj-$(CONFIG_GAMEPORT)		+= input/gameport/
 obj-$(CONFIG_INPUT)		+= input/
 obj-$(CONFIG_I2O)		+= message/