Merge branch 'tegra/dt' into next/dt

* tegra/dt: arm/tegra: Seaboard: Add GPIO key device tree nodes arm/dt: Add ADT7461 to Seaboard arm/dt: tegra: Use new compatible value for DVC I2C controller arm/tegra: initial device tree for tegra30 arm/tegra: convert tegra20 to GIC devicetree binding arm/dt: tegra: Fix SDHCI nodes to match board files arm/dt: tegra: Fix serial nodes to match board files arm/dt: tegra: Fix I2C nodes to match board files arm/dt: tegra: Remove /chosen node arm/dt: tegra: Remove /memreserve/ from device-tree files arm/tegra: board-dt: Enable audio-related clocks arm/tegra: board-dt: Fix AUXDATA typo arm/dt: tegra: add dts file for paz00 arm/tegra: Add device-tree support for TrimSlice board arm/dt: tegra: Clean up I2S and DAS nodes USB: ehci-tegra: add probing through device tree arm/dt: add basic usb nodes to tegra device trees arm/tegra: fix variable formatting in makefile Conflicts: arch/arm/mach-tegra/Makefile
git-mirror · Dec 27, 2011 · 9cad9a5 · 9cad9a5
2 parents e817e49 + bad1340
commit 9cad9a5
Show file tree

Hide file tree

Showing 14 changed files with 593 additions and 56 deletions.
diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt
@@ -0,0 +1,14 @@
+NVIDIA Tegra device tree bindings
+-------------------------------------------
+
+Boards with the tegra20 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "nvidia,tegra20";
+
+Boards with the tegra30 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "nvidia,tegra30";
diff --git a/Documentation/devicetree/bindings/usb/tegra-usb.txt b/Documentation/devicetree/bindings/usb/tegra-usb.txt
@@ -0,0 +1,13 @@
+Tegra SOC USB controllers
+
+The device node for a USB controller that is part of a Tegra
+SOC is as described in the document "Open Firmware Recommended
+Practice : Universal Serial Bus" with the following modifications
+and additions :
+
+Required properties :
+ - compatible : Should be "nvidia,tegra20-ehci" for USB controllers
+   used in host mode.
+ - phy_type : Should be one of "ulpi" or "utmi".
+ - nvidia,vbus-gpio : If present, specifies a gpio that needs to be
+   activated for the bus to be powered.
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
@@ -1,16 +1,11 @@
 /dts-v1/;
 
-/memreserve/ 0x1c000000 0x04000000;
 /include/ "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Tegra2 Harmony evaluation board";
 	compatible = "nvidia,harmony", "nvidia,tegra20";
 
-	chosen {
-		bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootwait";
-	};
-
 	memory@0 {
 		reg = < 0x00000000 0x40000000 >;
 	};
@@ -52,16 +47,40 @@
 		ext-mic-en-gpios = <&gpio 185 0>;
 	};
 
+	serial@70006000 {
+		status = "disable";
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
 	serial@70006300 {
 		clock-frequency = < 216000000 >;
 	};
 
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		status = "disable";
+	};
+
 	sdhci@c8000200 {
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
 		power-gpios = <&gpio 155 0>; /* gpio PT3 */
 	};
 
+	sdhci@c8000400 {
+		status = "disable";
+	};
+
 	sdhci@c8000600 {
 		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
 		wp-gpios = <&gpio 59 0>; /* gpio PH3 */

diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
@@ -0,0 +1,77 @@
+/dts-v1/;
+
+/include/ "tegra20.dtsi"
+
+/ {
+	model = "Toshiba AC100 / Dynabook AZ";
+	compatible = "compal,paz00", "nvidia,tegra20";
+
+	memory@0 {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		status = "disable";
+	};
+
+	nvec@7000c500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nvidia,nvec";
+		reg = <0x7000C500 0x100>;
+		interrupts = <0 92 0x04>;
+		clock-frequency = <80000>;
+		request-gpios = <&gpio 170 0>;
+		slave-addr = <138>;
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+	};
+
+	serial@70006000 {
+		clock-frequency = <216000000>;
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		cd-gpios = <&gpio 173 0>; /* gpio PV5 */
+		wp-gpios = <&gpio 57 0>;  /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+	};
+
+	sdhci@c8000200 {
+		status = "disable";
+	};
+
+	sdhci@c8000400 {
+		status = "disable";
+	};
+
+	sdhci@c8000600 {
+		support-8bit;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -1,25 +1,65 @@
 /dts-v1/;
 
-/memreserve/ 0x1c000000 0x04000000;
 /include/ "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Seaboard";
 	compatible = "nvidia,seaboard", "nvidia,tegra20";
 
-	chosen {
-		bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait";
-	};
-
 	memory {
 		device_type = "memory";
 		reg = < 0x00000000 0x40000000 >;
 	};
 
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+
+		adt7461@4c {
+			compatible = "adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	serial@70006000 {
+		status = "disable";
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
 	serial@70006300 {
 		clock-frequency = < 216000000 >;
 	};
 
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		status = "disable";
+	};
+
+	sdhci@c8000200 {
+		status = "disable";
+	};
+
 	sdhci@c8000400 {
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
@@ -29,4 +69,28 @@
 	sdhci@c8000600 {
 		support-8bit;
 	};
+
+	usb@c5000000 {
+		nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio 170 1>; /* gpio PV2, active low */
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio 23 0>; /* gpio PC7 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra-trimslice.dts
@@ -0,0 +1,65 @@
+/dts-v1/;
+
+/include/ "tegra20.dtsi"
+
+/ {
+	model = "Compulab TrimSlice board";
+	compatible = "compulab,trimslice", "nvidia,tegra20";
+
+	memory@0 {
+		reg = < 0x00000000 0x40000000 >;
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "disable";
+	};
+
+	serial@70006000 {
+		clock-frequency = < 216000000 >;
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
+	serial@70006300 {
+		status = "disable";
+	};
+
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		status = "disable";
+	};
+
+	sdhci@c8000200 {
+		status = "disable";
+	};
+
+	sdhci@c8000400 {
+		status = "disable";
+	};
+
+	sdhci@c8000600 {
+		cd-gpios = <&gpio 121 0>;
+		wp-gpios = <&gpio 122 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts
@@ -1,24 +1,59 @@
 /dts-v1/;
 
-/memreserve/ 0x1c000000 0x04000000;
 /include/ "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Tegra2 Ventana evaluation board";
 	compatible = "nvidia,ventana", "nvidia,tegra20";
 
-	chosen {
-		bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/ram rdinit=/sbin/init";
-	};
-
 	memory {
 		reg = < 0x00000000 0x40000000 >;
 	};
 
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+	};
+
+	serial@70006000 {
+		status = "disable";
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
 	serial@70006300 {
 		clock-frequency = < 216000000 >;
 	};
 
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		status = "disable";
+	};
+
+	sdhci@c8000200 {
+		status = "disable";
+	};
+
 	sdhci@c8000400 {
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */