Merge branch 'for-rmk/virt/kvm/core' of git://git.kernel.org/pub/scm/…

…linux/kernel/git/will/linux into devel-stable

Documentation/virtual/kvm/api.txt

@@ -293,7 +293,7 @@ kvm_run' (see below).
 4.11 KVM_GET_REGS
 
 Capability: basic
-Architectures: all
+Architectures: all except ARM
 Type: vcpu ioctl
 Parameters: struct kvm_regs (out)
 Returns: 0 on success, -1 on error
@@ -314,7 +314,7 @@ struct kvm_regs {
 4.12 KVM_SET_REGS
 
 Capability: basic
-Architectures: all
+Architectures: all except ARM
 Type: vcpu ioctl
 Parameters: struct kvm_regs (in)
 Returns: 0 on success, -1 on error
@@ -600,29 +600,47 @@ struct kvm_fpu {
 4.24 KVM_CREATE_IRQCHIP
 
 Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64
+Architectures: x86, ia64, ARM
 Type: vm ioctl
 Parameters: none
 Returns: 0 on success, -1 on error
 
 Creates an interrupt controller model in the kernel.  On x86, creates a virtual
 ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a
 local APIC.  IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23
-only go to the IOAPIC.  On ia64, a IOSAPIC is created.
+only go to the IOAPIC.  On ia64, a IOSAPIC is created. On ARM, a GIC is
+created.
 
 
 4.25 KVM_IRQ_LINE
 
 Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64
+Architectures: x86, ia64, arm
 Type: vm ioctl
 Parameters: struct kvm_irq_level
 Returns: 0 on success, -1 on error
 
 Sets the level of a GSI input to the interrupt controller model in the kernel.
-Requires that an interrupt controller model has been previously created with
-KVM_CREATE_IRQCHIP.  Note that edge-triggered interrupts require the level
-to be set to 1 and then back to 0.
+On some architectures it is required that an interrupt controller model has
+been previously created with KVM_CREATE_IRQCHIP.  Note that edge-triggered
+interrupts require the level to be set to 1 and then back to 0.
+
+ARM can signal an interrupt either at the CPU level, or at the in-kernel irqchip
+(GIC), and for in-kernel irqchip can tell the GIC to use PPIs designated for
+specific cpus.  The irq field is interpreted like this:
+
+  bits:  | 31 ... 24 | 23  ... 16 | 15    ...    0 |
+  field: | irq_type  | vcpu_index |     irq_id     |
+
+The irq_type field has the following values:
+- irq_type[0]: out-of-kernel GIC: irq_id 0 is IRQ, irq_id 1 is FIQ
+- irq_type[1]: in-kernel GIC: SPI, irq_id between 32 and 1019 (incl.)
+               (the vcpu_index field is ignored)
+- irq_type[2]: in-kernel GIC: PPI, irq_id between 16 and 31 (incl.)
+
+(The irq_id field thus corresponds nicely to the IRQ ID in the ARM GIC specs)
+
+In both cases, level is used to raise/lower the line.
 
 struct kvm_irq_level {
 	union {
@@ -1775,6 +1793,27 @@ registers, find a list below:
   PPC   | KVM_REG_PPC_VPA_DTL   | 128
   PPC   | KVM_REG_PPC_EPCR	| 32
 
+ARM registers are mapped using the lower 32 bits.  The upper 16 of that
+is the register group type, or coprocessor number:
+
+ARM core registers have the following id bit patterns:
+  0x4002 0000 0010 <index into the kvm_regs struct:16>
+
+ARM 32-bit CP15 registers have the following id bit patterns:
+  0x4002 0000 000F <zero:1> <crn:4> <crm:4> <opc1:4> <opc2:3>
+
+ARM 64-bit CP15 registers have the following id bit patterns:
+  0x4003 0000 000F <zero:1> <zero:4> <crm:4> <opc1:4> <zero:3>
+
+ARM CCSIDR registers are demultiplexed by CSSELR value:
+  0x4002 0000 0011 00 <csselr:8>
+
+ARM 32-bit VFP control registers have the following id bit patterns:
+  0x4002 0000 0012 1 <regno:12>
+
+ARM 64-bit FP registers have the following id bit patterns:
+  0x4002 0000 0012 0 <regno:12>
+
 4.69 KVM_GET_ONE_REG
 
 Capability: KVM_CAP_ONE_REG
@@ -2127,6 +2166,50 @@ written, then `n_invalid' invalid entries, invalidating any previously
 valid entries found.
 
 
+4.77 KVM_ARM_VCPU_INIT
+
+Capability: basic
+Architectures: arm
+Type: vcpu ioctl
+Parameters: struct struct kvm_vcpu_init (in)
+Returns: 0 on success; -1 on error
+Errors:
+  EINVAL:    the target is unknown, or the combination of features is invalid.
+  ENOENT:    a features bit specified is unknown.
+
+This tells KVM what type of CPU to present to the guest, and what
+optional features it should have.  This will cause a reset of the cpu
+registers to their initial values.  If this is not called, KVM_RUN will
+return ENOEXEC for that vcpu.
+
+Note that because some registers reflect machine topology, all vcpus
+should be created before this ioctl is invoked.
+
+Possible features:
+	- KVM_ARM_VCPU_POWER_OFF: Starts the CPU in a power-off state.
+	  Depends on KVM_CAP_ARM_PSCI.
+
+
+4.78 KVM_GET_REG_LIST
+
+Capability: basic
+Architectures: arm
+Type: vcpu ioctl
+Parameters: struct kvm_reg_list (in/out)
+Returns: 0 on success; -1 on error
+Errors:
+  E2BIG:     the reg index list is too big to fit in the array specified by
+             the user (the number required will be written into n).
+
+struct kvm_reg_list {
+	__u64 n; /* number of registers in reg[] */
+	__u64 reg[0];
+};
+
+This ioctl returns the guest registers that are supported for the
+KVM_GET_ONE_REG/KVM_SET_ONE_REG calls.
+
+
 5. The kvm_run structure
 ------------------------
 

MAINTAINERS

@@ -4481,6 +4481,15 @@ F:	arch/s390/include/asm/kvm*
 F:	arch/s390/kvm/
 F:	drivers/s390/kvm/
 
+KERNEL VIRTUAL MACHINE (KVM) FOR ARM
+M:	Christoffer Dall <cdall@cs.columbia.edu>
+L:	kvmarm@lists.cs.columbia.edu
+W:	http://systems.cs.columbia.edu/projects/kvm-arm
+S:	Maintained
+F:	arch/arm/include/uapi/asm/kvm*
+F:	arch/arm/include/asm/kvm*
+F:	arch/arm/kvm/
+
 KEXEC
 M:	Eric Biederman <ebiederm@xmission.com>
 W:	http://kernel.org/pub/linux/utils/kernel/kexec/

arch/arm/Kconfig

@@ -2332,3 +2332,5 @@ source "security/Kconfig"
 source "crypto/Kconfig"
 
 source "lib/Kconfig"
+
+source "arch/arm/kvm/Kconfig"

arch/arm/Makefile

@@ -252,6 +252,7 @@ core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
 core-$(CONFIG_XEN)		+= arch/arm/xen/
+core-$(CONFIG_KVM_ARM_HOST) 	+= arch/arm/kvm/
 
 # If we have a machine-specific directory, then include it in the build.
 core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/

arch/arm/include/asm/idmap.h

@@ -8,6 +8,7 @@
 #define __idmap __section(.idmap.text) noinline notrace
 
 extern pgd_t *idmap_pgd;
+extern pgd_t *hyp_pgd;
 
 void setup_mm_for_reboot(void);