---

yaml
---
r: 187672
b: refs/heads/master
c: 89f1fa0
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 6c6971dc4e8c23bb61bf309898e1693f9c5c8c24
+refs/heads/master: 89f1fa080b5dca259c9779bcf81b95a409fdbf5b

trunk/arch/arm/Kconfig

@@ -627,7 +627,7 @@ config ARCH_S3C2410
 
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
-	select PLAT_S3C
+	select PLAT_SAMSUNG
 	select CPU_V6
 	select GENERIC_GPIO
 	select ARM_VIC

trunk/arch/arm/Kconfig.debug

@@ -117,7 +117,7 @@ config DEBUG_CLPS711X_UART2
 	  cause the debug messages to appear on the first serial port.
 
 config DEBUG_S3C_UART
-	depends on PLAT_S3C
+	depends on PLAT_SAMSUNG
 	int "S3C UART to use for low-level debug"
 	default "0"
 	help

trunk/arch/arm/mach-s5pc100/include/mach/io.h

@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pc100/include/mach/io.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S5PC100 systems
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif

trunk/arch/arm/mach-s5pc100/include/mach/timex.h

@@ -0,0 +1,24 @@
+/* arch/arm/mach-s5pc100/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */

trunk/arch/arm/mach-s5pc100/include/mach/vmalloc.h

@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5pc100/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */

trunk/arch/arm/plat-s3c/Kconfig

@@ -9,88 +9,3 @@ config PLAT_S3C
 	select NO_IOPORT
 	help
 	  Base platform code for any Samsung S3C device
-
-# low-level serial option nodes
-
-if PLAT_S3C
-
-config CPU_LLSERIAL_S3C2410_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
-	bool
-	help
-	  Selected if there is an S3C2410 (or register compatible) serial
-	  low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
-	bool
-	help
-	  Selected if there is an S3C2440 (or register compatible) serial
-	  low-level implementation needed
-
-# boot configurations
-
-comment "Boot options"
-
-config S3C_BOOT_WATCHDOG
-	bool "S3C Initialisation watchdog"
-	depends on S3C2410_WATCHDOG
-	help
-	  Say y to enable the watchdog during the kernel decompression
-	  stage. If the kernel fails to uncompress, then the watchdog
-	  will trigger a reset and the system should restart.
-
-config S3C_BOOT_ERROR_RESET
-	bool "S3C Reboot on decompression error"
-	help
-	  Say y here to use the watchdog to reset the system if the
-	  kernel decompressor detects an error during decompression.
-
-config S3C_BOOT_UART_FORCE_FIFO
-       bool "Force UART FIFO on during boot process"
-       default y
-       help
-         Say Y here to force the UART FIFOs on during the kernel
-	 uncompressor
-
-
-config S3C_LOWLEVEL_UART_PORT
-	int "S3C UART to use for low-level messages"
-	default 0
-	help
-	  Choice of which UART port to use for the low-level messages,
-	  such as the `Uncompressing...` at start time. The value of
-	  this configuration should be between zero and two. The port
-	  must have been initialised by the boot-loader before use.
-
-# options for gpiolib support
-
-config S3C_GPIO_SPACE
-	int "Space between gpio banks"
-	default 0
-	help
-	  Add a number of spare GPIO entries between each bank for debugging
-	  purposes. This allows any problems where an counter overflows from
-	  one bank to another to be caught, at the expense of using a little
-	  more memory.
-
-config S3C_GPIO_TRACK
-	bool
-	help
-	  Internal configuration option to enable the s3c specific gpio
-	  chip tracking if the platform requires it.
-
-# DMA
-
-config S3C_DMA
-	bool
-	help
-	  Internal configuration for S3C DMA core
-
-endif

trunk/arch/arm/plat-s3c24xx/Kconfig

@@ -14,6 +14,28 @@ config PLAT_S3C24XX
 
 if PLAT_S3C24XX
 
+# low-level serial option nodes
+
+config CPU_LLSERIAL_S3C2410_ONLY
+	bool
+	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
+
+config CPU_LLSERIAL_S3C2440_ONLY
+	bool
+	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
+
+config CPU_LLSERIAL_S3C2410
+	bool
+	help
+	  Selected if there is an S3C2410 (or register compatible) serial
+	  low-level implementation needed
+
+config CPU_LLSERIAL_S3C2440
+	bool
+	help
+	  Selected if there is an S3C2440 (or register compatible) serial
+	  low-level implementation needed
+
 # code that is shared between a number of the s3c24xx implementations
 
 config S3C2410_CLOCK

trunk/arch/arm/plat-s5p/Kconfig

@@ -9,7 +9,6 @@ config PLAT_S5P
 	bool
 	depends on ARCH_S5P6440
 	default y
-	select PLAT_S3C
 	select ARM_VIC
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB

trunk/arch/arm/plat-samsung/Kconfig

@@ -13,6 +13,43 @@ config PLAT_SAMSUNG
 
 if PLAT_SAMSUNG
 
+# boot configurations
+
+comment "Boot options"
+
+config S3C_BOOT_WATCHDOG
+	bool "S3C Initialisation watchdog"
+	depends on S3C2410_WATCHDOG
+	help
+	  Say y to enable the watchdog during the kernel decompression
+	  stage. If the kernel fails to uncompress, then the watchdog
+	  will trigger a reset and the system should restart.
+
+config S3C_BOOT_ERROR_RESET
+	bool "S3C Reboot on decompression error"
+	help
+	  Say y here to use the watchdog to reset the system if the
+	  kernel decompressor detects an error during decompression.
+
+config S3C_BOOT_UART_FORCE_FIFO
+       bool "Force UART FIFO on during boot process"
+       default y
+       help
+         Say Y here to force the UART FIFOs on during the kernel
+	 uncompressor
+
+
+config S3C_LOWLEVEL_UART_PORT
+	int "S3C UART to use for low-level messages"
+	default 0
+	help
+	  Choice of which UART port to use for the low-level messages,
+	  such as the `Uncompressing...` at start time. The value of
+	  this configuration should be between zero and two. The port
+	  must have been initialised by the boot-loader before use.
+
+# clock options
+
 config SAMSUNG_CLKSRC
 	bool
 	help
@@ -81,6 +118,21 @@ config SAMSUNG_GPIO_EXTRA
 	  provides. This allows expanding the GPIO space for use with
 	  GPIO expanders.
 
+config S3C_GPIO_SPACE
+	int "Space between gpio banks"
+	default 0
+	help
+	  Add a number of spare GPIO entries between each bank for debugging
+	  purposes. This allows any problems where an counter overflows from
+	  one bank to another to be caught, at the expense of using a little
+	  more memory.
+
+config S3C_GPIO_TRACK
+	bool
+	help
+	  Internal configuration option to enable the s3c specific gpio
+	  chip tracking if the platform requires it.
+
 # ADC driver
 
 config S3C_ADC
@@ -138,6 +190,13 @@ config S3C64XX_DEV_SPI
 	  Compile in platform device definitions for S3C64XX's type
 	  SPI controllers.
 
+# DMA
+
+config S3C_DMA
+	bool
+	help
+	  Internal configuration for S3C DMA core
+
 comment "Power management"
 
 config SAMSUNG_PM_DEBUG