---

yaml
---
r: 22911
b: refs/heads/master
c: e060e08
h: refs/heads/master
i:
  22909: e0a7180
  22907: 1cf70db
  22903: 1ab30c0
  22895: bd70a7a
  22879: d213e57
  22847: 057faf7
  22783: ff4af8d
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 30f5933657d17fbbc743ce9522543ba50ce2e834
+refs/heads/master: e060e084e7d9e1c62d02cb6b8d3fe07db5317eaa

trunk/arch/powerpc/platforms/83xx/mpc834x_sys.c

@@ -69,15 +69,14 @@ mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
 	const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4;
 	return PCI_IRQ_TABLE_LOOKUP;
 }
-#endif /* CONFIG_PCI */
+#endif				/* CONFIG_PCI */
 
 /* ************************************************************************
  *
  * Setup the architecture
  *
  */
-static void __init
-mpc834x_sys_setup_arch(void)
+static void __init mpc834x_sys_setup_arch(void)
 {
 	struct device_node *np;
 
@@ -86,14 +85,14 @@ mpc834x_sys_setup_arch(void)
 
 	np = of_find_node_by_type(NULL, "cpu");
 	if (np != 0) {
-		unsigned int *fp = (int *) get_property(np, "clock-frequency", NULL);
+		unsigned int *fp =
+		    (int *)get_property(np, "clock-frequency", NULL);
 		if (fp != 0)
 			loops_per_jiffy = *fp / HZ;
 		else
 			loops_per_jiffy = 50000000 / HZ;
 		of_node_put(np);
 	}
-
 #ifdef CONFIG_PCI
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
 		add_bridge(np);
@@ -104,14 +103,13 @@ mpc834x_sys_setup_arch(void)
 #endif
 
 #ifdef  CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
+	ROOT_DEV = Root_NFS;
 #else
-		ROOT_DEV = Root_HDA1;
+	ROOT_DEV = Root_HDA1;
 #endif
 }
 
-void __init
-mpc834x_sys_init_IRQ(void)
+void __init mpc834x_sys_init_IRQ(void)
 {
 	u8 senses[8] = {
 		0,			/* EXT 0 */
@@ -140,28 +138,27 @@ mpc834x_sys_init_IRQ(void)
 }
 
 #if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
-extern ulong	ds1374_get_rtc_time(void);
-extern int	ds1374_set_rtc_time(ulong);
+extern ulong ds1374_get_rtc_time(void);
+extern int ds1374_set_rtc_time(ulong);
 
-static int __init
-mpc834x_rtc_hookup(void)
+static int __init mpc834x_rtc_hookup(void)
 {
-	struct timespec	tv;
+	struct timespec tv;
 
 	ppc_md.get_rtc_time = ds1374_get_rtc_time;
 	ppc_md.set_rtc_time = ds1374_set_rtc_time;
 
 	tv.tv_nsec = 0;
-	tv.tv_sec = (ppc_md.get_rtc_time)();
+	tv.tv_sec = (ppc_md.get_rtc_time) ();
 	do_settimeofday(&tv);
 
 	return 0;
 }
+
 late_initcall(mpc834x_rtc_hookup);
 #endif
 
-void __init
-platform_init(void)
+void __init platform_init(void)
 {
 	/* setup the PowerPC module struct */
 	ppc_md.setup_arch = mpc834x_sys_setup_arch;

trunk/arch/powerpc/platforms/83xx/mpc834x_sys.h

@@ -20,4 +20,4 @@
 #define PIRQC	MPC83xx_IRQ_EXT6
 #define PIRQD	MPC83xx_IRQ_EXT7
 
-#endif                /* __MACH_MPC83XX_SYS_H__ */
+#endif				/* __MACH_MPC83XX_SYS_H__ */

trunk/arch/powerpc/platforms/83xx/mpc83xx.h

@@ -14,4 +14,4 @@ extern int mpc83xx_exclude_device(u_char bus, u_char devfn);
 extern void mpc83xx_restart(char *cmd);
 extern long mpc83xx_time_init(void);
 
-#endif /* __MPC83XX_H__ */
+#endif				/* __MPC83XX_H__ */

trunk/arch/powerpc/platforms/83xx/pci.c

@@ -61,7 +61,7 @@ int __init add_bridge(struct device_node *dev)
 	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
 
 	/* Get bus range if any */
-	bus_range = (int *) get_property(dev, "bus-range", &len);
+	bus_range = (int *)get_property(dev, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
 		printk(KERN_WARNING "Can't get bus-range for %s, assume"
 		       " bus 0\n", dev->full_name);
@@ -83,7 +83,7 @@ int __init add_bridge(struct device_node *dev)
 	if ((rsrc.start & 0xfffff) == 0x8500) {
 		setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304);
 	}
-	/* PCI 2*/
+	/* PCI 2 */
 	if ((rsrc.start & 0xfffff) == 0x8600) {
 		setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384);
 		primary = 0;
@@ -93,10 +93,10 @@ int __init add_bridge(struct device_node *dev)
 
 	printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%08lx. "
 	       "Firmware bus number: %d->%d\n",
-		rsrc.start, hose->first_busno, hose->last_busno);
+	       rsrc.start, hose->first_busno, hose->last_busno);
 
 	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
-		hose, hose->cfg_addr, hose->cfg_data);
+	    hose, hose->cfg_addr, hose->cfg_data);
 
 	/* Interpret the "ranges" property */
 	/* This also maps the I/O region and sets isa_io/mem_base */