---

yaml
---
r: 272768
b: refs/heads/master
c: 090ad10
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: eff11ba9ebba475f2aedee74eebc459789f99ab6
+refs/heads/master: 090ad104c5c59c7952d4b8d4cfb60559b38eb3e0

trunk/Documentation/devicetree/bindings/arm/l2cc.txt

@@ -0,0 +1,44 @@
+* ARM L2 Cache Controller
+
+ARM cores often have a separate level 2 cache controller. There are various
+implementations of the L2 cache controller with compatible programming models.
+The ARM L2 cache representation in the device tree should be done as follows:
+
+Required properties:
+
+- compatible : should be one of:
+	"arm,pl310-cache"
+	"arm,l220-cache"
+	"arm,l210-cache"
+- cache-unified : Specifies the cache is a unified cache.
+- cache-level : Should be set to 2 for a level 2 cache.
+- reg : Physical base address and size of cache controller's memory mapped
+  registers.
+
+Optional properties:
+
+- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of
+  read, write and setup latencies. Minimum valid values are 1. Controllers
+  without setup latency control should use a value of 0.
+- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of
+  read, write and setup latencies. Controllers without setup latency control
+  should use 0. Controllers without separate read and write Tag RAM latency
+  values should only use the first cell.
+- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell.
+- arm,filter-ranges : <start length> Starting address and length of window to
+  filter. Addresses in the filter window are directed to the M1 port. Other
+  addresses will go to the M0 port.
+- interrupts : 1 combined interrupt.
+
+Example:
+
+L2: cache-controller {
+        compatible = "arm,pl310-cache";
+        reg = <0xfff12000 0x1000>;
+        arm,data-latency = <1 1 1>;
+        arm,tag-latency = <2 2 2>;
+        arm,filter-latency = <0x80000000 0x8000000>;
+        cache-unified;
+        cache-level = <2>;
+	interrupts = <45>;
+};

trunk/Documentation/feature-removal-schedule.txt

@@ -592,3 +592,11 @@ Why:    In 3.0, we can now autodetect internal 3G device and already have
 	interface that was used by acer-wmi driver. It will replaced by
 	information log when acer-wmi initial.
 Who:    Lee, Chun-Yi <jlee@novell.com>
+
+----------------------------
+What:	The XFS nodelaylog mount option
+When:	3.3
+Why:	The delaylog mode that has been the default since 2.6.39 has proven
+	stable, and the old code is in the way of additional improvements in
+	the log code.
+Who:	Christoph Hellwig <hch@lst.de>

trunk/Documentation/hwmon/max16065

@@ -62,6 +62,13 @@ can be safely used to identify the chip. You will have to instantiate
 the devices explicitly. Please see Documentation/i2c/instantiating-devices for
 details.
 
+WARNING: Do not access chip registers using the i2cdump command, and do not use
+any of the i2ctools commands on a command register (0xa5 to 0xac). The chips
+supported by this driver interpret any access to a command register (including
+read commands) as request to execute the command in question. This may result in
+power loss, board resets, and/or Flash corruption. Worst case, your board may
+turn into a brick.
+
 
 Sysfs entries
 -------------

trunk/MAINTAINERS

@@ -2649,11 +2649,11 @@ F:	drivers/net/wan/dlci.c
 F:	drivers/net/wan/sdla.c
 
 FRAMEBUFFER LAYER
-M:	Paul Mundt <lethal@linux-sh.org>
+M:	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
 L:	linux-fbdev@vger.kernel.org
 W:	http://linux-fbdev.sourceforge.net/
 Q:	http://patchwork.kernel.org/project/linux-fbdev/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
+T:	git git://github.com/schandinat/linux-2.6.git fbdev-next
 S:	Maintained
 F:	Documentation/fb/
 F:	Documentation/devicetree/bindings/fb/
@@ -4450,8 +4450,8 @@ M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 W:	http://patchwork.ozlabs.org/project/netdev/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
 S:	Maintained
 F:	net/
 F:	include/net/

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = "Divemaster Edition"
 
 # *DOCUMENTATION*

trunk/arch/arm/Kconfig

@@ -1271,6 +1271,18 @@ config ARM_ERRATA_754327
 	  This workaround defines cpu_relax() as smp_mb(), preventing correctly
 	  written polling loops from denying visibility of updates to memory.
 
+config ARM_ERRATA_364296
+	bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
+	depends on CPU_V6 && !SMP
+	help
+	  This options enables the workaround for the 364296 ARM1136
+	  r0p2 erratum (possible cache data corruption with
+	  hit-under-miss enabled). It sets the undocumented bit 31 in
+	  the auxiliary control register and the FI bit in the control
+	  register, thus disabling hit-under-miss without putting the
+	  processor into full low interrupt latency mode. ARM11MPCore
+	  is not affected.
+
 endmenu
 
 source "arch/arm/common/Kconfig"

trunk/arch/arm/boot/compressed/mmcif-sh7372.c

@@ -82,7 +82,7 @@ asmlinkage void mmc_loader(unsigned char *buf, unsigned long len)
 
 
 	/* Disable clock to MMC hardware block */
-	__raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3);
+	__raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3);
 
 	mmc_update_progress(MMC_PROGRESS_DONE);
 }

trunk/arch/arm/boot/compressed/sdhi-sh7372.c

@@ -85,7 +85,7 @@ asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
 		goto err;
 
         /* Disable clock to SDHI1 hardware block */
-        __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3);
+        __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3);
 
 	mmc_update_progress(MMC_PROGRESS_DONE);
 

trunk/arch/arm/boot/dts/prima2-cb.dts

@@ -39,9 +39,12 @@
 		ranges = <0x40000000 0x40000000 0x80000000>;
 
 		l2-cache-controller@80040000 {
-			compatible = "arm,pl310-cache";
+			compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
 			reg = <0x80040000 0x1000>;
 			interrupts = <59>;
+			arm,tag-latency = <1 1 1>;
+			arm,data-latency = <1 1 1>;
+			arm,filter-ranges = <0 0x40000000>;
 		};
 
 		intc: interrupt-controller@80020000 {
@@ -67,6 +70,11 @@
 				compatible = "sirf,prima2-rstc";
 				reg = <0x88010000 0x1000>;
 			};
+
+			rsc-controller@88020000 {
+				compatible = "sirf,prima2-rsc";
+				reg = <0x88020000 0x1000>;
+			};
 		};
 
 		mem-iobg {
@@ -274,7 +282,7 @@
 			gpio: gpio-controller@b0120000 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
-				compatible = "sirf,prima2-gpio";
+				compatible = "sirf,prima2-gpio-pinmux";
 				reg = <0xb0120000 0x10000>;
 				gpio-controller;
 				interrupt-controller;
@@ -358,7 +366,7 @@
 		};
 
 		rtc-iobg {
-			compatible = "sirf,prima2-rtciobg", "simple-bus";
+			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x80030000 0x10000>;

trunk/arch/arm/include/asm/hardware/cache-l2x0.h

@@ -45,8 +45,15 @@
 #define L2X0_CLEAN_INV_LINE_PA		0x7F0
 #define L2X0_CLEAN_INV_LINE_IDX		0x7F8
 #define L2X0_CLEAN_INV_WAY		0x7FC
-#define L2X0_LOCKDOWN_WAY_D		0x900
-#define L2X0_LOCKDOWN_WAY_I		0x904
+/*
+ * The lockdown registers repeat 8 times for L310, the L210 has only one
+ * D and one I lockdown register at 0x0900 and 0x0904.
+ */
+#define L2X0_LOCKDOWN_WAY_D_BASE	0x900
+#define L2X0_LOCKDOWN_WAY_I_BASE	0x904
+#define L2X0_LOCKDOWN_STRIDE		0x08
+#define L2X0_ADDR_FILTER_START		0xC00
+#define L2X0_ADDR_FILTER_END		0xC04
 #define L2X0_TEST_OPERATION		0xF00
 #define L2X0_LINE_DATA			0xF10
 #define L2X0_LINE_TAG			0xF30
@@ -60,20 +67,60 @@
 #define L2X0_CACHE_ID_PART_MASK		(0xf << 6)
 #define L2X0_CACHE_ID_PART_L210		(1 << 6)
 #define L2X0_CACHE_ID_PART_L310		(3 << 6)
+#define L2X0_CACHE_ID_RTL_MASK          0x3f
+#define L2X0_CACHE_ID_RTL_R0P0          0x0
+#define L2X0_CACHE_ID_RTL_R1P0          0x2
+#define L2X0_CACHE_ID_RTL_R2P0          0x4
+#define L2X0_CACHE_ID_RTL_R3P0          0x5
+#define L2X0_CACHE_ID_RTL_R3P1          0x6
+#define L2X0_CACHE_ID_RTL_R3P2          0x8
 
 #define L2X0_AUX_CTRL_MASK			0xc0000fff
+#define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT	0
+#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK	0x7
+#define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT	3
+#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK	(0x7 << 3)
+#define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT		6
+#define L2X0_AUX_CTRL_TAG_LATENCY_MASK		(0x7 << 6)
+#define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT	9
+#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK	(0x7 << 9)
 #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT	16
 #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT		17
-#define L2X0_AUX_CTRL_WAY_SIZE_MASK		(0x3 << 17)
+#define L2X0_AUX_CTRL_WAY_SIZE_MASK		(0x7 << 17)
 #define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT	22
 #define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT		26
 #define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT		27
 #define L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT	28
 #define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT	29
 #define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT		30
 
+#define L2X0_LATENCY_CTRL_SETUP_SHIFT	0
+#define L2X0_LATENCY_CTRL_RD_SHIFT	4
+#define L2X0_LATENCY_CTRL_WR_SHIFT	8
+
+#define L2X0_ADDR_FILTER_EN		1
+
 #ifndef __ASSEMBLY__
 extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
+extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask);
+
+struct l2x0_regs {
+	unsigned long phy_base;
+	unsigned long aux_ctrl;
+	/*
+	 * Whether the following registers need to be saved/restored
+	 * depends on platform
+	 */
+	unsigned long tag_latency;
+	unsigned long data_latency;
+	unsigned long filter_start;
+	unsigned long filter_end;
+	unsigned long prefetch_ctrl;
+	unsigned long pwr_ctrl;
+};
+
+extern struct l2x0_regs l2x0_saved_regs;
+
 #endif
 
 #endif

trunk/arch/arm/include/asm/outercache.h

@@ -34,6 +34,7 @@ struct outer_cache_fns {
 	void (*sync)(void);
 #endif
 	void (*set_debug)(unsigned long);
+	void (*resume)(void);
 };
 
 #ifdef CONFIG_OUTER_CACHE
@@ -74,6 +75,12 @@ static inline void outer_disable(void)
 		outer_cache.disable();
 }
 
+static inline void outer_resume(void)
+{
+	if (outer_cache.resume)
+		outer_cache.resume();
+}
+
 #else
 
 static inline void outer_inv_range(phys_addr_t start, phys_addr_t end)

trunk/arch/arm/include/asm/pmu.h

@@ -41,7 +41,7 @@ struct arm_pmu_platdata {
  * encoded error on failure.
  */
 extern struct platform_device *
-reserve_pmu(enum arm_pmu_type device);
+reserve_pmu(enum arm_pmu_type type);
 
 /**
  * release_pmu() - Relinquish control of the performance counters
@@ -62,26 +62,26 @@ release_pmu(enum arm_pmu_type type);
  * the actual hardware initialisation.
  */
 extern int
-init_pmu(enum arm_pmu_type device);
+init_pmu(enum arm_pmu_type type);
 
 #else /* CONFIG_CPU_HAS_PMU */
 
 #include <linux/err.h>
 
 static inline struct platform_device *
-reserve_pmu(enum arm_pmu_type device)
+reserve_pmu(enum arm_pmu_type type)
 {
 	return ERR_PTR(-ENODEV);
 }
 
 static inline int
-release_pmu(struct platform_device *pdev)
+release_pmu(enum arm_pmu_type type)
 {
 	return -ENODEV;
 }
 
 static inline int
-init_pmu(enum arm_pmu_type device)
+init_pmu(enum arm_pmu_type type)
 {
 	return -ENODEV;
 }

trunk/arch/arm/kernel/asm-offsets.c

@@ -20,6 +20,7 @@
 #include <asm/thread_info.h>
 #include <asm/memory.h>
 #include <asm/procinfo.h>
+#include <asm/hardware/cache-l2x0.h>
 #include <linux/kbuild.h>
 
 /*
@@ -92,6 +93,17 @@ int main(void)
   DEFINE(S_OLD_R0,		offsetof(struct pt_regs, ARM_ORIG_r0));
   DEFINE(S_FRAME_SIZE,		sizeof(struct pt_regs));
   BLANK();
+#ifdef CONFIG_CACHE_L2X0
+  DEFINE(L2X0_R_PHY_BASE,	offsetof(struct l2x0_regs, phy_base));
+  DEFINE(L2X0_R_AUX_CTRL,	offsetof(struct l2x0_regs, aux_ctrl));
+  DEFINE(L2X0_R_TAG_LATENCY,	offsetof(struct l2x0_regs, tag_latency));
+  DEFINE(L2X0_R_DATA_LATENCY,	offsetof(struct l2x0_regs, data_latency));
+  DEFINE(L2X0_R_FILTER_START,	offsetof(struct l2x0_regs, filter_start));
+  DEFINE(L2X0_R_FILTER_END,	offsetof(struct l2x0_regs, filter_end));
+  DEFINE(L2X0_R_PREFETCH_CTRL,	offsetof(struct l2x0_regs, prefetch_ctrl));
+  DEFINE(L2X0_R_PWR_CTRL,	offsetof(struct l2x0_regs, pwr_ctrl));
+  BLANK();
+#endif
 #ifdef CONFIG_CPU_HAS_ASID
   DEFINE(MM_CONTEXT_ID,		offsetof(struct mm_struct, context.id));
   BLANK();