---

yaml --- r: 362107 b: refs/heads/master c: cba26c5 h: refs/heads/master i: 362105: 46f3394 362103: 08c0290 v: v3
git-mirror · Mar 27, 2013 · 9e6e54e · 9e6e54e
1 parent 5b357db
commit 9e6e54e
Show file tree

Hide file tree

Showing 312 changed files with 3,231 additions and 1,623 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 265c3c0a64df50c0e8fe55cfe8af8851ed5feca5
+refs/heads/master: cba26c5ab991768cb7c2d6e96952f1226818fb41
diff --git a/trunk/CREDITS b/trunk/CREDITS
@@ -1510,6 +1510,14 @@ D: Natsemi ethernet
 D: Cobalt Networks (x86) support
 D: This-and-That
 
+N: Mark M. Hoffman
+E: mhoffman@lightlink.com
+D: asb100, lm93 and smsc47b397 hardware monitoring drivers
+D: hwmon subsystem core
+D: hwmon subsystem maintainer
+D: i2c-sis96x and i2c-stub SMBus drivers
+S: USA
+
 N: Dirk Hohndel
 E: hohndel@suse.de
 D: The XFree86[tm] Project

diff --git a/trunk/Documentation/hwmon/lm75 b/trunk/Documentation/hwmon/lm75
@@ -23,7 +23,7 @@ Supported chips:
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/
   * Microchip (TelCom) TCN75
-    Prefix: 'lm75'
+    Prefix: 'tcn75'
     Addresses scanned: none
     Datasheet: Publicly available at the Microchip website
                http://www.microchip.com/

diff --git a/trunk/Documentation/i2c/busses/i2c-diolan-u2c b/trunk/Documentation/i2c/busses/i2c-diolan-u2c
@@ -5,7 +5,7 @@ Supported adapters:
     Documentation:
 	http://www.diolan.com/i2c/u2c12.html
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 Description
 -----------

diff --git a/trunk/Documentation/sound/alsa/ALSA-Configuration.txt b/trunk/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -912,7 +912,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     models depending on the codec chip.  The list of available models
     is found in HD-Audio-Models.txt
 
-    The model name "genric" is treated as a special case.  When this
+    The model name "generic" is treated as a special case.  When this
     model is given, the driver uses the generic codec parser without
     "codec-patch".  It's sometimes good for testing and debugging.
 

diff --git a/trunk/Documentation/sound/alsa/seq_oss.html b/trunk/Documentation/sound/alsa/seq_oss.html
@@ -285,7 +285,7 @@ <H4>
 <H4>
 7.2.4 Close Callback</H4>
 The <TT>close</TT> callback is called when this device is closed by the
-applicaion. If any private data was allocated in open callback, it must
+application. If any private data was allocated in open callback, it must
 be released in the close callback. The deletion of ALSA port should be
 done here, too. This callback must not be NULL.
 <H4>

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -1338,12 +1338,6 @@ S:	Maintained
 F:	drivers/platform/x86/asus*.c
 F:	drivers/platform/x86/eeepc*.c
 
-ASUS ASB100 HARDWARE MONITOR DRIVER
-M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
-L:	lm-sensors@lm-sensors.org
-S:	Maintained
-F:	drivers/hwmon/asb100.c
-
 ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
 M:	Dan Williams <djbw@fb.com>
 W:	http://sourceforge.net/projects/xscaleiop
@@ -1467,6 +1461,12 @@ F:	drivers/dma/at_hdmac.c
 F:	drivers/dma/at_hdmac_regs.h
 F:	include/linux/platform_data/dma-atmel.h
 
+ATMEL I2C DRIVER
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
+L:	linux-i2c@vger.kernel.org
+S:	Supported
+F:	drivers/i2c/busses/i2c-at91.c
+
 ATMEL ISI DRIVER
 M:	Josh Wu <josh.wu@atmel.com>
 L:	linux-media@vger.kernel.org
@@ -2629,7 +2629,7 @@ F:	include/uapi/drm/
 
 INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
 M:	Daniel Vetter <daniel.vetter@ffwll.ch>
-L:	intel-gfx@lists.freedesktop.org (subscribers-only)
+L:	intel-gfx@lists.freedesktop.org
 L:	dri-devel@lists.freedesktop.org
 T:	git git://people.freedesktop.org/~danvet/drm-intel
 S:	Supported
@@ -3851,7 +3851,7 @@ F:	drivers/i2c/busses/i2c-ismt.c
 F:	Documentation/i2c/busses/i2c-ismt
 
 I2C/SMBUS STUB DRIVER
-M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
+M:	Jean Delvare <khali@linux-fr.org>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/i2c-stub.c
@@ -5647,6 +5647,14 @@ S:	Maintained
 F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
+NVM EXPRESS DRIVER
+M:	Matthew Wilcox <willy@linux.intel.com>
+L:	linux-nvme@lists.infradead.org
+T:	git git://git.infradead.org/users/willy/linux-nvme.git
+S:	Supported
+F:	drivers/block/nvme.c
+F:	include/linux/nvme.h
+
 OMAP SUPPORT
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
@@ -7198,13 +7206,6 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/sis/sis900.*
 
-SIS 96X I2C/SMBUS DRIVER
-M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	Documentation/i2c/busses/i2c-sis96x
-F:	drivers/i2c/busses/i2c-sis96x.c
-
 SIS FRAMEBUFFER DRIVER
 M:	Thomas Winischhofer <thomas@winischhofer.net>
 W:	http://www.winischhofer.net/linuxsisvga.shtml
@@ -7282,7 +7283,7 @@ F:	Documentation/hwmon/sch5627
 F:	drivers/hwmon/sch5627.c
 
 SMSC47B397 HARDWARE MONITOR DRIVER
-M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/smsc47b397

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig
@@ -49,7 +49,6 @@ config ARM
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
-	select VIRT_TO_BUS
 	select KTIME_SCALAR
 	select PERF_USE_VMALLOC
 	select RTC_LIB
@@ -743,6 +742,7 @@ config ARCH_RPC
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
 	select NO_IOPORT
+	select VIRT_TO_BUS
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -878,6 +878,7 @@ config ARCH_SHARK
 	select ISA_DMA
 	select NEED_MACH_MEMORY_H
 	select PCI
+	select VIRT_TO_BUS
 	select ZONE_DMA
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
@@ -1005,12 +1006,12 @@ config ARCH_MULTI_V4_V5
 	bool
 
 config ARCH_MULTI_V6
-	bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+	bool "ARMv6 based platforms (ARM11)"
 	select ARCH_MULTI_V6_V7
 	select CPU_V6
 
 config ARCH_MULTI_V7
-	bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
 	default y
 	select ARCH_MULTI_V6_V7
 	select ARCH_VEXPRESS
@@ -1461,10 +1462,6 @@ config ISA_DMA
 	bool
 	select ISA_DMA_API
 
-config ARCH_NO_VIRT_TO_BUS
-	def_bool y
-	depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
-
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool

diff --git a/trunk/arch/arm/boot/dts/at91sam9x5.dtsi b/trunk/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -238,8 +238,32 @@
 				nand {
 					pinctrl_nand: nand-0 {
 						atmel,pins =
-							<3 4 0x0 0x1	/* PD5 gpio RDY pin pull_up */
-							 3 5 0x0 0x1>;	/* PD4 gpio enable pin pull_up */
+							<3 0 0x1 0x0	/* PD0 periph A Read Enable */
+							 3 1 0x1 0x0	/* PD1 periph A Write Enable */
+							 3 2 0x1 0x0	/* PD2 periph A Address Latch Enable */
+							 3 3 0x1 0x0	/* PD3 periph A Command Latch Enable */
+							 3 4 0x0 0x1	/* PD4 gpio Chip Enable pin pull_up */
+							 3 5 0x0 0x1	/* PD5 gpio RDY/BUSY pin pull_up */
+							 3 6 0x1 0x0	/* PD6 periph A Data bit 0 */
+							 3 7 0x1 0x0	/* PD7 periph A Data bit 1 */
+							 3 8 0x1 0x0	/* PD8 periph A Data bit 2 */
+							 3 9 0x1 0x0	/* PD9 periph A Data bit 3 */
+							 3 10 0x1 0x0	/* PD10 periph A Data bit 4 */
+							 3 11 0x1 0x0	/* PD11 periph A Data bit 5 */
+							 3 12 0x1 0x0	/* PD12 periph A Data bit 6 */
+							 3 13 0x1 0x0>;	/* PD13 periph A Data bit 7 */
+					};
+
+					pinctrl_nand_16bits: nand_16bits-0 {
+						atmel,pins =
+							<3 14 0x1 0x0	/* PD14 periph A Data bit 8 */
+							 3 15 0x1 0x0	/* PD15 periph A Data bit 9 */
+							 3 16 0x1 0x0	/* PD16 periph A Data bit 10 */
+							 3 17 0x1 0x0	/* PD17 periph A Data bit 11 */
+							 3 18 0x1 0x0	/* PD18 periph A Data bit 12 */
+							 3 19 0x1 0x0	/* PD19 periph A Data bit 13 */
+							 3 20 0x1 0x0	/* PD20 periph A Data bit 14 */
+							 3 21 0x1 0x0>;	/* PD21 periph A Data bit 15 */
 					};
 				};
 

diff --git a/trunk/arch/arm/boot/dts/exynos4.dtsi b/trunk/arch/arm/boot/dts/exynos4.dtsi
@@ -275,18 +275,27 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <0 35 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		pdma1: pdma@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <0 36 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		mdma1: mdma@12850000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <0 34 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
 		};
 	};
 };
diff --git a/trunk/arch/arm/boot/dts/exynos5440.dtsi b/trunk/arch/arm/boot/dts/exynos5440.dtsi
@@ -142,12 +142,18 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x120000 0x1000>;
 			interrupts = <0 34 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		pdma1: pdma@121B0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121000 0x1000>;
 			interrupts = <0 35 0>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 	};
 

diff --git a/trunk/arch/arm/kernel/smp.c b/trunk/arch/arm/kernel/smp.c
@@ -480,7 +480,7 @@ static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
 	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
 			  CLOCK_EVT_FEAT_PERIODIC |
 			  CLOCK_EVT_FEAT_DUMMY;
-	evt->rating	= 400;
+	evt->rating	= 100;
 	evt->mult	= 1;
 	evt->set_mode	= broadcast_timer_set_mode;
 

diff --git a/trunk/arch/arm/lib/memset.S b/trunk/arch/arm/lib/memset.S
@@ -14,31 +14,15 @@
 
 	.text
 	.align	5
-	.word	0
-
-1:	subs	r2, r2, #4		@ 1 do we have enough
-	blt	5f			@ 1 bytes to align with?
-	cmp	r3, #2			@ 1
-	strltb	r1, [ip], #1		@ 1
-	strleb	r1, [ip], #1		@ 1
-	strb	r1, [ip], #1		@ 1
-	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
-/*
- * The pointer is now aligned and the length is adjusted.  Try doing the
- * memset again.
- */
 
 ENTRY(memset)
-/*
- * Preserve the contents of r0 for the return value.
- */
-	mov	ip, r0
-	ands	r3, ip, #3		@ 1 unaligned?
-	bne	1b			@ 1
+	ands	r3, r0, #3		@ 1 unaligned?
+	mov	ip, r0			@ preserve r0 as return value
+	bne	6f			@ 1
 /*
  * we know that the pointer in ip is aligned to a word boundary.
  */
-	orr	r1, r1, r1, lsl #8
+1:	orr	r1, r1, r1, lsl #8
 	orr	r1, r1, r1, lsl #16
 	mov	r3, r1
 	cmp	r2, #16
@@ -127,4 +111,13 @@ ENTRY(memset)
 	tst	r2, #1
 	strneb	r1, [ip], #1
 	mov	pc, lr
+
+6:	subs	r2, r2, #4		@ 1 do we have enough
+	blt	5b			@ 1 bytes to align with?
+	cmp	r3, #2			@ 1
+	strltb	r1, [ip], #1		@ 1
+	strleb	r1, [ip], #1		@ 1
+	strb	r1, [ip], #1		@ 1
+	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
+	b	1b
 ENDPROC(memset)
diff --git a/trunk/arch/arm/mach-at91/include/mach/gpio.h b/trunk/arch/arm/mach-at91/include/mach/gpio.h
@@ -209,6 +209,14 @@ extern int at91_get_gpio_value(unsigned pin);
 extern void at91_gpio_suspend(void);
 extern void at91_gpio_resume(void);
 
+#ifdef CONFIG_PINCTRL_AT91
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+#else
+static inline void at91_pinctrl_gpio_suspend(void) {}
+static inline void at91_pinctrl_gpio_resume(void) {}
+#endif
+
 #endif	/* __ASSEMBLY__ */
 
 #endif