Merge branch 'for_3.6/pm/sr-move' of git://git.kernel.org/pub/scm/lin…

…ux/kernel/git/khilman/linux-omap-pm into devel-driver

arch/arm/mach-omap2/Makefile

@@ -70,8 +70,9 @@ obj-$(CONFIG_ARCH_OMAP3)		+= cpuidle34xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o
 obj-$(CONFIG_ARCH_OMAP4)		+= cpuidle44xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
-obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
-obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
+
+obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)    += smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -14,6 +14,8 @@
  *
  * XXX these should be marked initdata for multi-OMAP kernels
  */
+#include <linux/power/smartreflex.h>
+
 #include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
 #include <plat/cpu.h>
@@ -29,8 +31,6 @@
 #include <plat/dmtimer.h>
 
 #include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
 #include "prm-regbits-34xx.h"
 #include "cm-regbits-34xx.h"
 #include "wd_timer.h"
@@ -1325,7 +1325,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
 };
 
 static struct omap_hwmod omap34xx_sr1_hwmod = {
-	.name		= "sr1",
+	.name		= "smartreflex_mpu_iva",
 	.class		= &omap34xx_smartreflex_hwmod_class,
 	.main_clk	= "sr1_fck",
 	.prcm		= {
@@ -1343,7 +1343,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
 };
 
 static struct omap_hwmod omap36xx_sr1_hwmod = {
-	.name		= "sr1",
+	.name		= "smartreflex_mpu_iva",
 	.class		= &omap36xx_smartreflex_hwmod_class,
 	.main_clk	= "sr1_fck",
 	.prcm		= {
@@ -1370,7 +1370,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
 };
 
 static struct omap_hwmod omap34xx_sr2_hwmod = {
-	.name		= "sr2",
+	.name		= "smartreflex_core",
 	.class		= &omap34xx_smartreflex_hwmod_class,
 	.main_clk	= "sr2_fck",
 	.prcm		= {
@@ -1388,7 +1388,7 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
 };
 
 static struct omap_hwmod omap36xx_sr2_hwmod = {
-	.name		= "sr2",
+	.name		= "smartreflex_core",
 	.class		= &omap36xx_smartreflex_hwmod_class,
 	.main_clk	= "sr2_fck",
 	.prcm		= {

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -19,6 +19,7 @@
  */
 
 #include <linux/io.h>
+#include <linux/power/smartreflex.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/cpu.h>
@@ -32,8 +33,6 @@
 #include <plat/common.h>
 
 #include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
 #include "prm44xx.h"

arch/arm/mach-omap2/pm.h

@@ -88,7 +88,7 @@ extern void enable_omap3630_toggle_l2_on_restore(void);
 static inline void enable_omap3630_toggle_l2_on_restore(void) { }
 #endif		/* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
 
-#ifdef CONFIG_OMAP_SMARTREFLEX
+#ifdef CONFIG_POWER_AVS_OMAP
 extern int omap_devinit_smartreflex(void);
 extern void omap_enable_smartreflex_on_init(void);
 #else

arch/arm/mach-omap2/smartreflex-class3.c

@@ -11,36 +11,37 @@
  * published by the Free Software Foundation.
  */
 
-#include "smartreflex.h"
+#include <linux/power/smartreflex.h>
+#include "voltage.h"
 
-static int sr_class3_enable(struct voltagedomain *voltdm)
+static int sr_class3_enable(struct omap_sr *sr)
 {
-	unsigned long volt = voltdm_get_voltage(voltdm);
+	unsigned long volt = voltdm_get_voltage(sr->voltdm);
 
 	if (!volt) {
-		pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n",
-				__func__, voltdm->name);
+		pr_warning("%s: Curr voltage unknown. Cannot enable %s\n",
+				__func__, sr->name);
 		return -ENODATA;
 	}
 
-	omap_vp_enable(voltdm);
-	return sr_enable(voltdm, volt);
+	omap_vp_enable(sr->voltdm);
+	return sr_enable(sr->voltdm, volt);
 }
 
-static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset)
+static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset)
 {
-	sr_disable_errgen(voltdm);
-	omap_vp_disable(voltdm);
-	sr_disable(voltdm);
+	sr_disable_errgen(sr->voltdm);
+	omap_vp_disable(sr->voltdm);
+	sr_disable(sr->voltdm);
 	if (is_volt_reset)
-		voltdm_reset(voltdm);
+		voltdm_reset(sr->voltdm);
 
 	return 0;
 }
 
-static int sr_class3_configure(struct voltagedomain *voltdm)
+static int sr_class3_configure(struct omap_sr *sr)
 {
-	return sr_configure_errgen(voltdm);
+	return sr_configure_errgen(sr->voltdm);
 }
 
 /* SR class3 structure */

arch/arm/mach-omap2/sr_device.c

@@ -17,14 +17,14 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/power/smartreflex.h>
 
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/io.h>
 
 #include <plat/omap_device.h>
 
-#include "smartreflex.h"
 #include "voltage.h"
 #include "control.h"
 #include "pm.h"
@@ -36,16 +36,25 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 				struct omap_sr_data *sr_data)
 {
 	struct omap_sr_nvalue_table *nvalue_table;
-	int i, count = 0;
+	int i, j, count = 0;
+
+	sr_data->nvalue_count = 0;
+	sr_data->nvalue_table = NULL;
 
 	while (volt_data[count].volt_nominal)
 		count++;
 
 	nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count,
 			GFP_KERNEL);
 
-	for (i = 0; i < count; i++) {
+	if (!nvalue_table) {
+		pr_err("OMAP: SmartReflex: cannot allocate memory for n-value table\n");
+		return;
+	}
+
+	for (i = 0, j = 0; i < count; i++) {
 		u32 v;
+
 		/*
 		 * In OMAP4 the efuse registers are 24 bit aligned.
 		 * A __raw_readl will fail for non-32 bit aligned address
@@ -58,15 +67,30 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 				omap_ctrl_readb(offset + 1) << 8 |
 				omap_ctrl_readb(offset + 2) << 16;
 		} else {
-			 v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
+			v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
 		}
 
-		nvalue_table[i].efuse_offs = volt_data[i].sr_efuse_offs;
-		nvalue_table[i].nvalue = v;
+		/*
+		 * Many OMAP SoCs don't have the eFuse values set.
+		 * For example, pretty much all OMAP3xxx before
+		 * ES3.something.
+		 *
+		 * XXX There needs to be some way for board files or
+		 * userspace to add these in.
+		 */
+		if (v == 0)
+			continue;
+
+		nvalue_table[j].nvalue = v;
+		nvalue_table[j].efuse_offs = volt_data[i].sr_efuse_offs;
+		nvalue_table[j].errminlimit = volt_data[i].sr_errminlimit;
+		nvalue_table[j].volt_nominal = volt_data[i].volt_nominal;
+
+		j++;
 	}
 
 	sr_data->nvalue_table = nvalue_table;
-	sr_data->nvalue_count = count;
+	sr_data->nvalue_count = j;
 }
 
 static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
@@ -93,6 +117,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 		goto exit;
 	}
 
+	sr_data->name = oh->name;
 	sr_data->ip_type = oh->class->rev;
 	sr_data->senn_mod = 0x1;
 	sr_data->senp_mod = 0x1;

arch/arm/mach-omap2/voltage.h

@@ -16,6 +16,8 @@
 
 #include <linux/err.h>
 
+#include <plat/voltage.h>
+
 #include "vc.h"
 #include "vp.h"
 
@@ -90,25 +92,6 @@ struct voltagedomain {
 	struct omap_volt_data *volt_data;
 };
 
-/**
- * struct omap_volt_data - Omap voltage specific data.
- * @voltage_nominal:	The possible voltage value in uV
- * @sr_efuse_offs:	The offset of the efuse register(from system
- *			control module base address) from where to read
- *			the n-target value for the smartreflex module.
- * @sr_errminlimit:	Error min limit value for smartreflex. This value
- *			differs at differnet opp and thus is linked
- *			with voltage.
- * @vp_errorgain:	Error gain value for the voltage processor. This
- *			field also differs according to the voltage/opp.
- */
-struct omap_volt_data {
-	u32	volt_nominal;
-	u32	sr_efuse_offs;
-	u8	sr_errminlimit;
-	u8	vp_errgain;
-};
-
 /**
  * struct omap_voltdm_pmic - PMIC specific data required by voltage driver.
  * @slew_rate:	PMIC slew rate (in uv/us)

arch/arm/plat-omap/Kconfig

@@ -45,31 +45,30 @@ config OMAP_DEBUG_LEDS
 	depends on OMAP_DEBUG_DEVICES
 	default y if LEDS_CLASS
 
-config OMAP_SMARTREFLEX
-	bool "SmartReflex support"
-	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+config POWER_AVS_OMAP
+	bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
+	depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM
 	help
-	  Say Y if you want to enable SmartReflex.
-
-	  SmartReflex can perform continuous dynamic voltage
-	  scaling around the nominal operating point voltage
-	  according to silicon characteristics and operating
-	  conditions. Enabling SmartReflex reduces power
-	  consumption.
+	  Say Y to enable AVS(Adaptive Voltage Scaling)
+	  support on OMAP containing the version 1 or
+	  version 2 of the SmartReflex IP.
+	  V1 is the 65nm version used in OMAP3430.
+	  V2 is the update for the 45nm version of the IP used in OMAP3630
+	  and OMAP4430
 
 	  Please note, that by default SmartReflex is only
-	  initialized. To enable the automatic voltage
-	  compensation for vdd mpu  and vdd core from user space,
+	  initialized and not enabled. To enable the automatic voltage
+	  compensation for vdd mpu and vdd core from user space,
 	  user must write 1 to
-		/debug/voltage/vdd_<X>/smartreflex/autocomp,
-	  where X is mpu or core for OMAP3.
+		/debug/smartreflex/sr_<X>/autocomp,
+	  where X is mpu_iva or core for OMAP3.
 	  Optionally autocompensation can be enabled in the kernel
 	  by default during system init via the enable_on_init flag
 	  which an be passed as platform data to the smartreflex driver.
 
-config OMAP_SMARTREFLEX_CLASS3
+config POWER_AVS_OMAP_CLASS3
 	bool "Class 3 mode of Smartreflex Implementation"
-	depends on OMAP_SMARTREFLEX && TWL4030_CORE
+	depends on POWER_AVS_OMAP && TWL4030_CORE
 	help
 	  Say Y to enable Class 3 implementation of Smartreflex
 

arch/arm/plat-omap/include/plat/voltage.h

@@ -11,10 +11,29 @@
 #ifndef __ARCH_ARM_OMAP_VOLTAGE_H
 #define __ARCH_ARM_OMAP_VOLTAGE_H
 
+/**
+ * struct omap_volt_data - Omap voltage specific data.
+ * @voltage_nominal:	The possible voltage value in uV
+ * @sr_efuse_offs:	The offset of the efuse register(from system
+ *			control module base address) from where to read
+ *			the n-target value for the smartreflex module.
+ * @sr_errminlimit:	Error min limit value for smartreflex. This value
+ *			differs at differnet opp and thus is linked
+ *			with voltage.
+ * @vp_errorgain:	Error gain value for the voltage processor. This
+ *			field also differs according to the voltage/opp.
+ */
+struct omap_volt_data {
+	u32	volt_nominal;
+	u32	sr_efuse_offs;
+	u8	sr_errminlimit;
+	u8	vp_errgain;
+};
 struct voltagedomain;
 
 struct voltagedomain *voltdm_lookup(const char *name);
 int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
 unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
-
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+		unsigned long volt);
 #endif

drivers/power/Kconfig

@@ -310,3 +310,5 @@ config AB8500_BATTERY_THERM_ON_BATCTRL
 	  Say Y to enable battery temperature measurements using
 	  thermistor connected on BATCTRL ADC.
 endif # POWER_SUPPLY
+
+source "drivers/power/avs/Kconfig"

drivers/power/Makefile

@@ -43,4 +43,5 @@ obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
 obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
+obj-$(CONFIG_POWER_AVS)		+= avs/
 obj-$(CONFIG_CHARGER_SMB347)	+= smb347-charger.o

drivers/power/avs/Kconfig

@@ -0,0 +1,12 @@
+menuconfig POWER_AVS
+	tristate "Adaptive Voltage Scaling class support"
+	help
+	  AVS is a power management technique which finely controls the
+	  operating voltage of a device in order to optimize (i.e. reduce)
+	  its power consumption.
+	  At a given operating point the voltage is adapted depending on
+	  static factors (chip manufacturing process) and dynamic factors
+	  (temperature depending performance).
+	  AVS is also called SmartReflex on OMAP devices.
+
+	  Say Y here to enable Adaptive Voltage Scaling class support.

drivers/power/avs/Makefile

@@ -0,0 +1 @@
+obj-$(CONFIG_POWER_AVS_OMAP)		+= smartreflex.o