[ARM] 4657/1: AT91: Header definition update

Add definitions of registers / bits found on some AT91SAM9 processors

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

include/asm-arm/arch-at91/at91_pmc.h

@@ -37,7 +37,9 @@
 #define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
 #define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
 
-#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register */
+#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL only] */
+
+#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
 #define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
 #define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [AT91SAM926x only] */
 #define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */

include/asm-arm/arch-at91/at91_twi.h

@@ -21,6 +21,8 @@
 #define		AT91_TWI_STOP		(1 <<  1)	/* Send a Stop Condition */
 #define		AT91_TWI_MSEN		(1 <<  2)	/* Master Transfer Enable */
 #define		AT91_TWI_MSDIS		(1 <<  3)	/* Master Transfer Disable */
+#define		AT91_TWI_SVEN		(1 <<  4)	/* Slave Transfer Enable [SAM9260 only] */
+#define		AT91_TWI_SVDIS		(1 <<  5)	/* Slave Transfer Disable [SAM9260 only] */
 #define		AT91_TWI_SWRST		(1 <<  7)	/* Software Reset */
 
 #define	AT91_TWI_MMR		0x04		/* Master Mode Register */
@@ -32,6 +34,9 @@
 #define		AT91_TWI_MREAD		(1    << 12)	/* Master Read Direction */
 #define		AT91_TWI_DADR		(0x7f << 16)	/* Device Address */
 
+#define	AT91_TWI_SMR		0x08		/* Slave Mode Register [SAM9260 only] */
+#define		AT91_TWI_SADR		(0x7f << 16)	/* Slave Address */
+
 #define	AT91_TWI_IADR		0x0c		/* Internal Address Register */
 
 #define	AT91_TWI_CWGR		0x10		/* Clock Waveform Generator Register */
@@ -43,9 +48,15 @@
 #define		AT91_TWI_TXCOMP		(1 <<  0)	/* Transmission Complete */
 #define		AT91_TWI_RXRDY		(1 <<  1)	/* Receive Holding Register Ready */
 #define		AT91_TWI_TXRDY		(1 <<  2)	/* Transmit Holding Register Ready */
+#define		AT91_TWI_SVREAD		(1 <<  3)	/* Slave Read [SAM9260 only] */
+#define		AT91_TWI_SVACC		(1 <<  4)	/* Slave Access [SAM9260 only] */
+#define		AT91_TWI_GACC		(1 <<  5)	/* General Call Access [SAM9260 only] */
 #define		AT91_TWI_OVRE		(1 <<  6)	/* Overrun Error [AT91RM9200 only] */
 #define		AT91_TWI_UNRE		(1 <<  7)	/* Underrun Error [AT91RM9200 only] */
 #define		AT91_TWI_NACK		(1 <<  8)	/* Not Acknowledged */
+#define		AT91_TWI_ARBLST		(1 <<  9)	/* Arbitration Lost [SAM9260 only] */
+#define		AT91_TWI_SCLWS		(1 << 10)	/* Clock Wait State [SAM9260 only] */
+#define		AT91_TWI_EOSACC		(1 << 11)	/* End of Slave Address [SAM9260 only] */
 
 #define	AT91_TWI_IER		0x24		/* Interrupt Enable Register */
 #define	AT91_TWI_IDR		0x28		/* Interrupt Disable Register */

include/asm-arm/arch-at91/at91sam9260_matrix.h

@@ -67,7 +67,7 @@
 #define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
 #define			AT91_MATRIX_CS4A_SMC		(0 << 4)
 #define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5 )	/* Chip Select 5 Assignment */
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
 #define			AT91_MATRIX_CS5A_SMC		(0 << 5)
 #define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
 #define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */