---

yaml
---
r: 189831
b: refs/heads/master
c: 50b88c4
h: refs/heads/master
i:
  189829: c68afea
  189827: cee87b6
  189823: adc8a8d
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 85b3cce880a19e78286570d5fd004cc3cac06f57
+refs/heads/master: 50b88c46f01939d19d4cdd30ad563d29265b6c59

trunk/Documentation/DocBook/tracepoint.tmpl

@@ -16,6 +16,15 @@
      </address>
     </affiliation>
    </author>
+   <author>
+    <firstname>William</firstname>
+    <surname>Cohen</surname>
+    <affiliation>
+     <address>
+      <email>wcohen@redhat.com</email>
+     </address>
+    </affiliation>
+   </author>
   </authorgroup>
 
   <legalnotice>
@@ -91,4 +100,8 @@
 !Iinclude/trace/events/signal.h
   </chapter>
 
+  <chapter id="block">
+   <title>Block IO</title>
+!Iinclude/trace/events/block.h
+  </chapter>
 </book>

trunk/Documentation/block/biodoc.txt

@@ -1162,8 +1162,8 @@ where a driver received a request ala this before:
 
 As mentioned, there is no virtual mapping of a bio. For DMA, this is
 not a problem as the driver probably never will need a virtual mapping.
-Instead it needs a bus mapping (pci_map_page for a single segment or
-use blk_rq_map_sg for scatter gather) to be able to ship it to the driver. For
+Instead it needs a bus mapping (dma_map_page for a single segment or
+use dma_map_sg for scatter gather) to be able to ship it to the driver. For
 PIO drivers (or drivers that need to revert to PIO transfer once in a
 while (IDE for example)), where the CPU is doing the actual data
 transfer a virtual mapping is needed. If the driver supports highmem I/O,

trunk/Documentation/fb/imacfb.txt → trunk/Documentation/fb/efifb.txt

@@ -1,9 +1,9 @@
 
-What is imacfb?
+What is efifb?
 ===============
 
 This is a generic EFI platform driver for Intel based Apple computers.
-Imacfb is only for EFI booted Intel Macs.
+efifb is only for EFI booted Intel Macs.
 
 Supported Hardware
 ==================
@@ -16,16 +16,16 @@ MacMini
 How to use it?
 ==============
 
-Imacfb does not have any kind of autodetection of your machine.
+efifb does not have any kind of autodetection of your machine.
 You have to add the following kernel parameters in your elilo.conf:
 	Macbook :
-		video=imacfb:macbook
+		video=efifb:macbook
 	MacMini :
-		video=imacfb:mini
+		video=efifb:mini
 	Macbook Pro 15", iMac 17" :
-		video=imacfb:i17
+		video=efifb:i17
 	Macbook Pro 17", iMac 20" :
-		video=imacfb:i20
+		video=efifb:i20
 
 --
 Edgar Hucek <gimli@dark-green.com>

trunk/Documentation/sound/alsa/HD-Audio.txt

@@ -119,10 +119,18 @@ the codec slots 0 and 1 no matter what the hardware reports.
 
 Interrupt Handling
 ~~~~~~~~~~~~~~~~~~
-In rare but some cases, the interrupt isn't properly handled as
-default.  You would notice this by the DMA transfer error reported by
-ALSA PCM core, for example.  Using MSI might help in such a case.
-Pass `enable_msi=1` option for enabling MSI.
+HD-audio driver uses MSI as default (if available) since 2.6.33
+kernel as MSI works better on some machines, and in general, it's
+better for performance.  However, Nvidia controllers showed bad
+regressions with MSI (especially in a combination with AMD chipset),
+thus we disabled MSI for them.
+
+There seem also still other devices that don't work with MSI.  If you
+see a regression wrt the sound quality (stuttering, etc) or a lock-up
+in the recent kernel, try to pass `enable_msi=0` option to disable
+MSI.  If it works, you can add the known bad device to the blacklist
+defined in hda_intel.c.  In such a case, please report and give the
+patch back to the upstream developer. 
 
 
 HD-AUDIO CODEC

trunk/MAINTAINERS

@@ -2484,12 +2484,6 @@ L:	linuxppc-dev@ozlabs.org
 S:	Odd Fixes
 F:	drivers/char/hvc_*
 
-VIRTIO CONSOLE DRIVER
-M:	Amit Shah <amit.shah@redhat.com>
-L:	virtualization@lists.linux-foundation.org
-S:	Maintained
-F:	drivers/char/virtio_console.c
-
 iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
 M:	Peter Jones <pjones@redhat.com>
 M:	Konrad Rzeszutek Wilk <konrad@kernel.org>
@@ -5981,6 +5975,13 @@ S:	Maintained
 F:	Documentation/filesystems/vfat.txt
 F:	fs/fat/
 
+VIRTIO CONSOLE DRIVER
+M:	Amit Shah <amit.shah@redhat.com>
+L:	virtualization@lists.linux-foundation.org
+S:	Maintained
+F:	drivers/char/virtio_console.c
+F:	include/linux/virtio_console.h
+
 VIRTIO HOST (VHOST)
 M:	"Michael S. Tsirkin" <mst@redhat.com>
 L:	kvm@vger.kernel.org

trunk/arch/arm/mach-davinci/dm365.c

@@ -758,7 +758,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 	[IRQ_MMCINT]			= 7,
 	[IRQ_DM365_MMCINT1]		= 7,
 	[IRQ_DM365_PWMINT3]		= 7,
-	[IRQ_DDRINT]			= 4,
 	[IRQ_AEMIFINT]			= 2,
 	[IRQ_DM365_SDIOINT1]		= 2,
 	[IRQ_TINT0_TINT12]		= 7,

trunk/arch/arm/mach-davinci/dma.c

@@ -1267,7 +1267,8 @@ int edma_start(unsigned channel)
 		/* EDMA channel with event association */
 		pr_debug("EDMA: ER%d %08x\n", j,
 			edma_shadow0_read_array(ctlr, SH_ER, j));
-		/* Clear any pending error */
+		/* Clear any pending event or error */
+		edma_write_array(ctlr, EDMA_ECR, j, mask);
 		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 		/* Clear any SER */
 		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);

trunk/arch/arm/mach-davinci/include/mach/da8xx.h

@@ -3,7 +3,7 @@
  *
  * Author: Mark A. Greer <mgreer@mvista.com>
  *
- * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under
  * the terms of the GNU General Public License version 2. This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
@@ -13,7 +13,9 @@
 
 #include <video/da8xx-fb.h>
 
+#include <linux/platform_device.h>
 #include <linux/davinci_emac.h>
+
 #include <mach/serial.h>
 #include <mach/edma.h>
 #include <mach/i2c.h>
@@ -144,6 +146,10 @@ extern const short da850_mmcsd0_pins[];
 extern const short da850_nand_pins[];
 extern const short da850_nor_pins[];
 
+#ifdef CONFIG_DAVINCI_MUX
 int da8xx_pinmux_setup(const short pins[]);
+#else
+static inline int da8xx_pinmux_setup(const short pins[]) { return 0; }
+#endif
 
 #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */

trunk/arch/arm/mach-davinci/time.c

@@ -253,8 +253,6 @@ static void __init timer_init(void)
 			irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
 			setup_irq(irq, &t->irqaction);
 		}
-
-		timer32_config(&timers[i]);
 	}
 }
 
@@ -331,6 +329,7 @@ static void __init davinci_timer_init(void)
 	unsigned int clocksource_id;
 	static char err[] __initdata = KERN_ERR
 		"%s: can't register clocksource!\n";
+	int i;
 
 	clockevent_id = soc_info->timer_info->clockevent_id;
 	clocksource_id = soc_info->timer_info->clocksource_id;
@@ -389,6 +388,9 @@ static void __init davinci_timer_init(void)
 
 	clockevent_davinci.cpumask = cpumask_of(0);
 	clockevents_register_device(&clockevent_davinci);
+
+	for (i=0; i< ARRAY_SIZE(timers); i++)
+		timer32_config(&timers[i]);
 }
 
 struct sys_timer davinci_timer = {

trunk/arch/frv/include/asm/segment.h

@@ -21,12 +21,12 @@ typedef struct {
 
 #define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
 
-#define KERNEL_DS		MAKE_MM_SEG(0xdfffffffUL)
-
 #ifdef CONFIG_MMU
 #define USER_DS			MAKE_MM_SEG(TASK_SIZE - 1)
+#define KERNEL_DS		MAKE_MM_SEG(0xdfffffffUL)
 #else
-#define USER_DS			KERNEL_DS
+#define USER_DS			MAKE_MM_SEG(memory_end)
+#define KERNEL_DS		MAKE_MM_SEG(0xe0000000UL)
 #endif
 
 #define get_ds()		(KERNEL_DS)

trunk/arch/frv/include/asm/uaccess.h

@@ -27,8 +27,6 @@
 #define VERIFY_READ	0
 #define VERIFY_WRITE	1
 
-#define __addr_ok(addr) ((unsigned long)(addr) < get_addr_limit())
-
 /*
  * check that a range of addresses falls within the current address limit
  */

trunk/arch/microblaze/include/asm/futex.h

@@ -55,7 +55,7 @@ futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
 		__futex_atomic_op("or %1,%0,%4;", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
-		__futex_atomic_op("and %1,%0,%4;", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("andn %1,%0,%4;", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_XOR:
 		__futex_atomic_op("xor %1,%0,%4;", ret, oldval, uaddr, oparg);

trunk/arch/microblaze/include/asm/io.h

@@ -108,6 +108,11 @@ static inline void writel(unsigned int v, volatile void __iomem *addr)
 #define iowrite16(v, addr)	__raw_writew((u16)(v), (u16 *)(addr))
 #define iowrite32(v, addr)	__raw_writel((u32)(v), (u32 *)(addr))
 
+#define ioread16be(addr)	__raw_readw((u16 *)(addr))
+#define ioread32be(addr)	__raw_readl((u32 *)(addr))
+#define iowrite16be(v, addr)	__raw_writew((u16)(v), (u16 *)(addr))
+#define iowrite32be(v, addr)	__raw_writel((u32)(v), (u32 *)(addr))
+
 /* These are the definitions for the x86 IO instructions
  * inb/inw/inl/outb/outw/outl, the "string" versions
  * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions

trunk/arch/microblaze/kernel/ftrace.c

@@ -151,13 +151,10 @@ int ftrace_make_nop(struct module *mod,
 	return ret;
 }
 
-static int ret_addr; /* initialized as 0 by default */
-
 /* I believe that first is called ftrace_make_nop before this function */
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
 	int ret;
-	ret_addr = addr; /* saving where the barrier jump is */
 	pr_debug("%s: addr:0x%x, rec->ip: 0x%x, imm:0x%x\n",
 		__func__, (unsigned int)addr, (unsigned int)rec->ip, imm);
 	ret = ftrace_modify_code(rec->ip, imm);
@@ -194,12 +191,9 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 	ret = ftrace_modify_code(ip, upper);
 	ret += ftrace_modify_code(ip + 4, lower);
 
-	/* We just need to remove the rtsd r15, 8 by NOP */
-	BUG_ON(!ret_addr);
-	if (ret_addr)
-		ret += ftrace_modify_code(ret_addr, MICROBLAZE_NOP);
-	else
-		ret = 1; /* fault */
+	/* We just need to replace the rtsd r15, 8 with NOP */
+	ret += ftrace_modify_code((unsigned long)&ftrace_caller,
+				  MICROBLAZE_NOP);
 
 	/* All changes are done - lets do caches consistent */
 	flush_icache();

trunk/arch/microblaze/kernel/ptrace.c

@@ -75,7 +75,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int rval;
 	unsigned long val = 0;
-	unsigned long copied;
 
 	switch (request) {
 	/* Read/write the word at location ADDR in the registers. */

trunk/arch/mips/alchemy/devboards/db1200/setup.c

@@ -60,43 +60,6 @@ void __init board_setup(void)
 	wmb();
 }
 
-/* use the hexleds to count the number of times the cpu has entered
- * wait, the dots to indicate whether the CPU is currently idle or
- * active (dots off = sleeping, dots on = working) for cases where
- * the number doesn't change for a long(er) period of time.
- */
-static void db1200_wait(void)
-{
-	__asm__("	.set	push			\n"
-		"	.set	mips3			\n"
-		"	.set	noreorder		\n"
-		"	cache	0x14, 0(%0)		\n"
-		"	cache	0x14, 32(%0)		\n"
-		"	cache	0x14, 64(%0)		\n"
-		/* dots off: we're about to call wait */
-		"	lui	$26, 0xb980		\n"
-		"	ori	$27, $0, 3		\n"
-		"	sb	$27, 0x18($26)		\n"
-		"	sync				\n"
-		"	nop				\n"
-		"	wait				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	nop				\n"
-		"	nop				\n"
-		/* dots on: there's work to do, increment cntr */
-		"	lui	$26, 0xb980		\n"
-		"	sb	$0, 0x18($26)		\n"
-		"	lui	$26, 0xb9c0		\n"
-		"	lb	$27, 0($26)		\n"
-		"	addiu	$27, $27, 1		\n"
-		"	sb	$27, 0($26)		\n"
-		"	sync				\n"
-		"	.set	pop			\n"
-		: : "r" (db1200_wait));
-}
-
 static int __init db1200_arch_init(void)
 {
 	/* GPIO7 is low-level triggered CPLD cascade */
@@ -110,9 +73,6 @@ static int __init db1200_arch_init(void)
 	irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
 	irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
 
-	if (cpu_wait)
-		cpu_wait = db1200_wait;
-
 	return 0;
 }
 arch_initcall(db1200_arch_init);

trunk/arch/mips/ar7/platform.c

@@ -168,7 +168,7 @@ static struct plat_vlynq_data vlynq_high_data = {
 		.on	= vlynq_on,
 		.off	= vlynq_off,
 	},
-	.reset_bit	= 26,
+	.reset_bit	= 16,
 	.gpio_bit	= 19,
 };
 
@@ -600,6 +600,7 @@ static int __init ar7_register_devices(void)
 	}
 
 	if (ar7_has_high_cpmac()) {
+		res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
 		if (!res) {
 			cpmac_get_mac(1, cpmac_high_data.dev_addr);