---

yaml
---
r: 158137
b: refs/heads/master
c: 4e3408d
h: refs/heads/master
i:
  158135: c2cb47a
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 96910b6dc8a4fdb75e69f09f47b62d41743d36ba
+refs/heads/master: 4e3408d9f71a70316ebe844c20ef0d7715281f84

trunk/Documentation/feature-removal-schedule.txt

@@ -468,3 +468,27 @@ Why:	cpu_policy_rwsem has a new cleaner definition making it local to
 	cpufreq core and contained inside cpufreq.c. Other dependent
 	drivers should not use it in order to safely avoid lockdep issues.
 Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+----------------------------
+
+What:	sound-slot/service-* module aliases and related clutters in
+	sound/sound_core.c
+When:	August 2010
+Why:	OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
+	(14) and requests modules using custom sound-slot/service-*
+	module aliases.  The only benefit of doing this is allowing
+	use of custom module aliases which might as well be considered
+	a bug at this point.  This preemptive claiming prevents
+	alternative OSS implementations.
+
+	Till the feature is removed, the kernel will be requesting
+	both sound-slot/service-* and the standard char-major-* module
+	aliases and allow turning off the pre-claiming selectively via
+	CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss
+	kernel parameter.
+
+	After the transition phase is complete, both the custom module
+	aliases and switches to disable it will go away.  This removal
+	will also allow making ALSA OSS emulation independent of
+	sound_core.  The dependency will be broken then too.
+Who:	Tejun Heo <tj@kernel.org>

trunk/Documentation/keys.txt

@@ -26,7 +26,7 @@ This document has the following sections:
 	- Notes on accessing payload contents
 	- Defining a key type
 	- Request-key callback service
-	- Key access filesystem
+	- Garbage collection
 
 
 ============
@@ -113,6 +113,9 @@ Each key has a number of attributes:
 
      (*) Dead. The key's type was unregistered, and so the key is now useless.
 
+Keys in the last three states are subject to garbage collection.  See the
+section on "Garbage collection".
+
 
 ====================
 KEY SERVICE OVERVIEW
@@ -754,6 +757,26 @@ The keyctl syscall functions are:
      successful.
 
 
+ (*) Install the calling process's session keyring on its parent.
+
+	long keyctl(KEYCTL_SESSION_TO_PARENT);
+
+     This functions attempts to install the calling process's session keyring
+     on to the calling process's parent, replacing the parent's current session
+     keyring.
+
+     The calling process must have the same ownership as its parent, the
+     keyring must have the same ownership as the calling process, the calling
+     process must have LINK permission on the keyring and the active LSM module
+     mustn't deny permission, otherwise error EPERM will be returned.
+
+     Error ENOMEM will be returned if there was insufficient memory to complete
+     the operation, otherwise 0 will be returned to indicate success.
+
+     The keyring will be replaced next time the parent process leaves the
+     kernel and resumes executing userspace.
+
+
 ===============
 KERNEL SERVICES
 ===============
@@ -1231,3 +1254,17 @@ by executing:
 
 In this case, the program isn't required to actually attach the key to a ring;
 the rings are provided for reference.
+
+
+==================
+GARBAGE COLLECTION
+==================
+
+Dead keys (for which the type has been removed) will be automatically unlinked
+from those keyrings that point to them and deleted as soon as possible by a
+background garbage collector.
+
+Similarly, revoked and expired keys will be garbage collected, but only after a
+certain amount of time has passed.  This time is set as a number of seconds in:
+
+	/proc/sys/kernel/keys/gc_delay

trunk/Documentation/kmemleak.txt

@@ -27,6 +27,13 @@ To trigger an intermediate memory scan:
 
   # echo scan > /sys/kernel/debug/kmemleak
 
+To clear the list of all current possible memory leaks:
+
+  # echo clear > /sys/kernel/debug/kmemleak
+
+New leaks will then come up upon reading /sys/kernel/debug/kmemleak
+again.
+
 Note that the orphan objects are listed in the order they were allocated
 and one object at the beginning of the list may cause other subsequent
 objects to be reported as orphan.
@@ -42,6 +49,9 @@ Memory scanning parameters can be modified at run-time by writing to the
   scan=<secs>	- set the automatic memory scanning period in seconds
 		  (default 600, 0 to stop the automatic scanning)
   scan		- trigger a memory scan
+  clear		- clear list of current memory leak suspects, done by
+		  marking all current reported unreferenced objects grey
+  dump=<addr>	- dump information about the object found at <addr>
 
 Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
 the kernel command line.
@@ -86,6 +96,27 @@ avoid this, kmemleak can also store the number of values pointing to an
 address inside the block address range that need to be found so that the
 block is not considered a leak. One example is __vmalloc().
 
+Testing specific sections with kmemleak
+---------------------------------------
+
+Upon initial bootup your /sys/kernel/debug/kmemleak output page may be
+quite extensive. This can also be the case if you have very buggy code
+when doing development. To work around these situations you can use the
+'clear' command to clear all reported unreferenced objects from the
+/sys/kernel/debug/kmemleak output. By issuing a 'scan' after a 'clear'
+you can find new unreferenced objects; this should help with testing
+specific sections of code.
+
+To test a critical section on demand with a clean kmemleak do:
+
+  # echo clear > /sys/kernel/debug/kmemleak
+  ... test your kernel or modules ...
+  # echo scan > /sys/kernel/debug/kmemleak
+
+Then as usual to get your report with:
+
+  # cat /sys/kernel/debug/kmemleak
+
 Kmemleak API
 ------------
 

trunk/Documentation/s390/s390dbf.txt

@@ -495,6 +495,13 @@ and for each vararg a long value. So e.g. for a debug entry with a format
 string plus two varargs one would need to allocate a (3 * sizeof(long)) 
 byte data area in the debug_register() function.
 
+IMPORTANT: Using "%s" in sprintf event functions is dangerous. You can only
+use "%s" in the sprintf event functions, if the memory for the passed string is
+available as long as the debug feature exists. The reason behind this is that
+due to performance considerations only a pointer to the string is stored in
+the debug feature. If you log a string that is freed afterwards, you will get
+an OOPS when inspecting the debug feature, because then the debug feature will
+access the already freed memory.
 
 NOTE: If using the sprintf view do NOT use other event/exception functions
 than the sprintf-event and -exception functions.

trunk/Documentation/sound/alsa/ALSA-Configuration.txt

@@ -60,6 +60,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     slots	- Reserve the slot index for the given driver.
 		  This option takes multiple strings.		
 		  See "Module Autoloading Support" section for details.
+    debug	- Specifies the debug message level
+		  (0 = disable debug prints, 1 = normal debug messages,
+		   2 = verbose debug messages)
+		  This option appears only when CONFIG_SND_DEBUG=y.
+		  This option can be dynamically changed via sysfs
+		  /sys/modules/snd/parameters/debug file.
 
   Module snd-pcm-oss
   ------------------
@@ -513,6 +519,26 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     or input, but you may use this module for any application which
     requires a sound card (like RealPlayer).
 
+    pcm_devs       - Number of PCM devices assigned to each card
+                     (default = 1, up to 4)
+    pcm_substreams - Number of PCM substreams assigned to each PCM
+                     (default = 8, up to 16)
+    hrtimer        - Use hrtimer (=1, default) or system timer (=0)
+    fake_buffer    - Fake buffer allocations (default = 1)
+
+    When multiple PCM devices are created, snd-dummy gives different
+    behavior to each PCM device:
+      0 = interleaved with mmap support
+      1 = non-interleaved with mmap support
+      2 = interleaved without mmap 
+      3 = non-interleaved without mmap
+
+    As default, snd-dummy drivers doesn't allocate the real buffers
+    but either ignores read/write or mmap a single dummy page to all
+    buffer pages, in order to save the resouces.  If your apps need
+    the read/ written buffer data to be consistent, pass fake_buffer=0
+    option.
+
     The power-management is supported.
 
   Module snd-echo3g
@@ -768,6 +794,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     bdl_pos_adj	- Specifies the DMA IRQ timing delay in samples.
 		Passing -1 will make the driver to choose the appropriate
 		value based on the controller chip.
+    patch	- Specifies the early "patch" files to modify the HD-audio
+    		setup before initializing the codecs.  This option is
+		available only when CONFIG_SND_HDA_PATCH_LOADER=y is set.
+		See HD-Audio.txt for details.
 
     [Single (global) options]
     single_cmd  - Use single immediate commands to communicate with

trunk/Documentation/sound/alsa/HD-Audio-Models.txt

@@ -114,8 +114,8 @@ ALC662/663/272
   samsung-nc10	Samsung NC10 mini notebook
   auto		auto-config reading BIOS (default)
 
-ALC882/885
-==========
+ALC882/883/885/888/889
+======================
   3stack-dig	3-jack with SPDIF I/O
   6stack-dig	6-jack digital with SPDIF I/O
   arima		Arima W820Di1
@@ -127,19 +127,16 @@ ALC882/885
   mbp3		Macbook Pro rev3
   imac24	iMac 24'' with jack detection
   w2jc		ASUS W2JC
-  auto		auto-config reading BIOS (default)
-
-ALC883/888
-==========
-  3stack-dig	3-jack with SPDIF I/O
-  6stack-dig	6-jack digital with SPDIF I/O
+  3stack-2ch-dig	3-jack with SPDIF I/O (ALC883)
+  alc883-6stack-dig	6-jack digital with SPDIF I/O (ALC883)
   3stack-6ch    3-jack 6-channel
   3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
   6stack-dig-demo  6-jack digital for Intel demo board
   acer		Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
   acer-aspire	Acer Aspire 9810
   acer-aspire-4930g Acer Aspire 4930G
   acer-aspire-6530g Acer Aspire 6530G
+  acer-aspire-7730g Acer Aspire 7730G
   acer-aspire-8930g Acer Aspire 8930G
   medion	Medion Laptops
   medion-md2	Medion MD2
@@ -155,10 +152,13 @@ ALC883/888
   3stack-hp	HP machines with 3stack (Lucknow, Samba boards)
   6stack-dell	Dell machines with 6stack (Inspiron 530)
   mitac		Mitac 8252D
+  clevo-m540r	Clevo M540R (6ch + digital)
   clevo-m720	Clevo M720 laptop series
   fujitsu-pi2515 Fujitsu AMILO Pi2515
   fujitsu-xa3530 Fujitsu AMILO XA3530
   3stack-6ch-intel Intel DG33* boards
+  intel-alc889a	Intel IbexPeak with ALC889A
+  intel-x58	Intel DX58 with ALC889
   asus-p5q	ASUS P5Q-EM boards
   mb31		MacBook 3,1
   sony-vaio-tt  Sony VAIO TT
@@ -229,7 +229,7 @@ AD1984
 ======
   basic		default configuration
   thinkpad	Lenovo Thinkpad T61/X61
-  dell		Dell T3400
+  dell_desktop	Dell T3400
 
 AD1986A
 =======
@@ -258,6 +258,7 @@ Conexant 5045
   laptop-micsense   Laptop with Mic sense (old model fujitsu)
   laptop-hpmicsense Laptop with HP and Mic senses
   benq		Benq R55E
+  laptop-hp530	HP 530 laptop
   test		for testing/debugging purpose, almost all controls
 		can be adjusted.  Appearing only when compiled with
 		$CONFIG_SND_DEBUG=y
@@ -278,9 +279,16 @@ Conexant 5051
   hp-dv6736	HP dv6736
   lenovo-x200	Lenovo X200 laptop
 
+Conexant 5066
+=============
+  laptop	Basic Laptop config (default)
+  dell-laptop	Dell laptops
+  olpc-xo-1_5	OLPC XO 1.5
+
 STAC9200
 ========
   ref		Reference board
+  oqo		OQO Model 2
   dell-d21	Dell (unknown)
   dell-d22	Dell (unknown)
   dell-d23	Dell (unknown)
@@ -368,10 +376,12 @@ STAC92HD73*
 ===========
   ref		Reference board
   no-jd		BIOS setup but without jack-detection
+  intel		Intel DG45* mobos
   dell-m6-amic	Dell desktops/laptops with analog mics
   dell-m6-dmic	Dell desktops/laptops with digital mics
   dell-m6	Dell desktops/laptops with both type of mics
   dell-eq	Dell desktops/laptops
+  alienware	Alienware M17x
   auto		BIOS setup (default)
 
 STAC92HD83*
@@ -385,3 +395,8 @@ STAC9872
 ========
   vaio		VAIO laptop without SPDIF
   auto		BIOS setup (default)
+
+Cirrus Logic CS4206/4207
+========================
+  mbp55		MacBook Pro 5,5
+  auto		BIOS setup (default)

trunk/Documentation/sound/alsa/HD-Audio.txt

@@ -138,6 +138,10 @@ override the BIOS setup or to provide more comprehensive features.
 The driver checks PCI SSID and looks through the static configuration
 table until any matching entry is found.  If you have a new machine,
 you may see a message like below:
+------------------------------------------------------------------------
+    hda_codec: ALC880: BIOS auto-probing.
+------------------------------------------------------------------------
+Meanwhile, in the earlier versions, you would see a message like:
 ------------------------------------------------------------------------
     hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
 ------------------------------------------------------------------------
@@ -403,6 +407,66 @@ re-configure based on that state, run like below:
 ------------------------------------------------------------------------
 
 
+Early Patching
+~~~~~~~~~~~~~~
+When CONFIG_SND_HDA_PATCH_LOADER=y is set, you can pass a "patch" as a
+firmware file for modifying the HD-audio setup before initializing the
+codec.  This can work basically like the reconfiguration via sysfs in
+the above, but it does it before the first codec configuration.
+
+A patch file is a plain text file which looks like below:
+
+------------------------------------------------------------------------
+  [codec]
+  0x12345678 0xabcd1234 2
+
+  [model]
+  auto
+
+  [pincfg]
+  0x12 0x411111f0
+
+  [verb]
+  0x20 0x500 0x03
+  0x20 0x400 0xff
+
+  [hint]
+  hp_detect = yes
+------------------------------------------------------------------------
+
+The file needs to have a line `[codec]`.  The next line should contain
+three numbers indicating the codec vendor-id (0x12345678 in the
+example), the codec subsystem-id (0xabcd1234) and the address (2) of
+the codec.  The rest patch entries are applied to this specified codec
+until another codec entry is given.
+
+The `[model]` line allows to change the model name of the each codec.
+In the example above, it will be changed to model=auto.
+Note that this overrides the module option.
+
+After the `[pincfg]` line, the contents are parsed as the initial
+default pin-configurations just like `user_pin_configs` sysfs above.
+The values can be shown in user_pin_configs sysfs file, too.
+
+Similarly, the lines after `[verb]` are parsed as `init_verbs`
+sysfs entries, and the lines after `[hint]` are parsed as `hints`
+sysfs entries, respectively.
+
+The hd-audio driver reads the file via request_firmware().  Thus,
+a patch file has to be located on the appropriate firmware path,
+typically, /lib/firmware.  For example, when you pass the option
+`patch=hda-init.fw`, the file /lib/firmware/hda-init-fw must be
+present.
+
+The patch module option is specific to each card instance, and you
+need to give one file name for each instance, separated by commas.
+For example, if you have two cards, one for an on-board analog and one 
+for an HDMI video board, you may pass patch option like below:
+------------------------------------------------------------------------
+    options snd-hda-intel patch=on-board-patch,hdmi-patch
+------------------------------------------------------------------------
+
+
 Power-Saving
 ~~~~~~~~~~~~
 The power-saving is a kind of auto-suspend of the device.  When the