---

yaml
---
r: 293506
b: refs/heads/master
c: 828006d
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 5ec65ee589fdaca7298b6303fd74ad6c121a8f38
+refs/heads/master: 828006de1bddf83b6ecf03ec459c15f7c7c22db7

trunk/arch/arm/mach-omap1/Kconfig

@@ -37,15 +37,13 @@ comment "OMAP Board Type"
 config MACH_OMAP_INNOVATOR
 	bool "TI Innovator"
 	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
-	select OMAP_MCBSP
 	help
           TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
           have such a board.
 
 config MACH_OMAP_H2
 	bool "TI H2 Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-	select OMAP_MCBSP
     	help
 	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
 	  a board.
@@ -72,7 +70,6 @@ config MACH_HERALD
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-	select OMAP_MCBSP
     	help
 	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
           if you have such a board.

trunk/arch/arm/mach-omap1/Makefile

@@ -6,7 +6,9 @@
 obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
 obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
 
-obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
+obj-y += mcbsp.o
+endif
 
 obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 

trunk/arch/arm/mach-omap1/devices.c

@@ -28,7 +28,6 @@
 #include <plat/mux.h>
 #include <plat/mmc.h>
 #include <plat/omap7xx.h>
-#include <plat/mcbsp.h>
 
 #include "clock.h"
 
@@ -250,16 +249,8 @@ static struct platform_device omap_pcm = {
 	.id	= -1,
 };
 
-OMAP_MCBSP_PLATFORM_DEVICE(1);
-OMAP_MCBSP_PLATFORM_DEVICE(2);
-OMAP_MCBSP_PLATFORM_DEVICE(3);
-
 static void omap_init_audio(void)
 {
-	platform_device_register(&omap_mcbsp1);
-	platform_device_register(&omap_mcbsp2);
-	if (!cpu_is_omap7xx())
-		platform_device_register(&omap_mcbsp3);
 	platform_device_register(&omap_pcm);
 }
 

trunk/arch/arm/mach-omap1/mcbsp.c

@@ -419,18 +419,6 @@ static int __init omap1_mcbsp_init(void)
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
 
-	if (cpu_is_omap7xx())
-		omap_mcbsp_count = OMAP7XX_MCBSP_COUNT;
-	else if (cpu_is_omap15xx())
-		omap_mcbsp_count = OMAP15XX_MCBSP_COUNT;
-	else if (cpu_is_omap16xx())
-		omap_mcbsp_count = OMAP16XX_MCBSP_COUNT;
-
-	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
-								GFP_KERNEL);
-	if (!mcbsp_ptr)
-		return -ENOMEM;
-
 	if (cpu_is_omap7xx())
 		omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0,
 					OMAP7XX_MCBSP_RES_SZ,
@@ -449,7 +437,7 @@ static int __init omap1_mcbsp_init(void)
 					omap16xx_mcbsp_pdata,
 					OMAP16XX_MCBSP_COUNT);
 
-	return omap_mcbsp_init();
+	return 0;
 }
 
 arch_initcall(omap1_mcbsp_init);

trunk/arch/arm/mach-omap2/Makefile

@@ -17,7 +17,9 @@ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
 obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
 
-obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
+obj-y += mcbsp.o
+endif
 
 obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
 

trunk/arch/arm/mach-omap2/board-omap4panda.c

@@ -530,7 +530,7 @@ void omap4_panda_display_init(void)
 
 static void omap4_panda_init_rev(void)
 {
-	if (cpu_is_omap4430()) {
+	if (cpu_is_omap443x()) {
 		/* PandaBoard 4430 */
 		/* ASoC audio configuration */
 		panda_abe_audio_data.card_name = "PandaBoard";

trunk/arch/arm/mach-omap2/devices.c

@@ -26,7 +26,6 @@
 
 #include <plat/tc.h>
 #include <plat/board.h>
-#include <plat/mcbsp.h>
 #include <plat/mmc.h>
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
@@ -304,29 +303,8 @@ static struct platform_device omap_pcm = {
 	.id	= -1,
 };
 
-/*
- * OMAP2420 has 2 McBSP ports
- * OMAP2430 has 5 McBSP ports
- * OMAP3 has 5 McBSP ports
- * OMAP4 has 4 McBSP ports
- */
-OMAP_MCBSP_PLATFORM_DEVICE(1);
-OMAP_MCBSP_PLATFORM_DEVICE(2);
-OMAP_MCBSP_PLATFORM_DEVICE(3);
-OMAP_MCBSP_PLATFORM_DEVICE(4);
-OMAP_MCBSP_PLATFORM_DEVICE(5);
-
 static void omap_init_audio(void)
 {
-	platform_device_register(&omap_mcbsp1);
-	platform_device_register(&omap_mcbsp2);
-	if (cpu_is_omap243x() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
-		platform_device_register(&omap_mcbsp3);
-		platform_device_register(&omap_mcbsp4);
-	}
-	if (cpu_is_omap243x() || cpu_is_omap34xx())
-		platform_device_register(&omap_mcbsp5);
-
 	platform_device_register(&omap_pcm);
 }
 

trunk/arch/arm/mach-omap2/mcbsp.c

@@ -34,7 +34,7 @@
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 
-/* McBSP internal signal muxing function */
+/* McBSP1 internal signal muxing function for OMAP2/3 */
 static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
 				   const char *src)
 {
@@ -65,6 +65,42 @@ static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
 	return 0;
 }
 
+/* McBSP4 internal signal muxing function for OMAP4 */
+#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX	(1 << 31)
+#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX	(1 << 30)
+static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal,
+				   const char *src)
+{
+	u32 v;
+
+	/*
+	 * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR
+	 * mux) is used */
+	v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
+
+	if (!strcmp(signal, "clkr")) {
+		if (!strcmp(src, "clkr"))
+			v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
+		else if (!strcmp(src, "clkx"))
+			v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
+		else
+			return -EINVAL;
+	} else if (!strcmp(signal, "fsr")) {
+		if (!strcmp(src, "fsr"))
+			v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
+		else if (!strcmp(src, "fsx"))
+			v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
+		else
+			return -EINVAL;
+	} else {
+		return -EINVAL;
+	}
+
+	omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
+
+	return 0;
+}
+
 /* McBSP CLKS source switching function */
 static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
 				   const char *src)
@@ -146,9 +182,15 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		pdata->has_ccr = true;
 	}
 	pdata->set_clk_src = omap2_mcbsp_set_clk_src;
-	if (id == 1)
+
+	/* On OMAP2/3 the McBSP1 port has 6 pin configuration */
+	if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4)
 		pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
 
+	/* On OMAP4 the McBSP4 port has 6 pin configuration */
+	if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4)
+		pdata->mux_signal = omap4_mcbsp4_mux_rx_clk;
+
 	if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
 		if (id == 2)
 			/* The FIFO has 1024 + 256 locations */
@@ -180,19 +222,13 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 					name, oh->name);
 		return PTR_ERR(pdev);
 	}
-	omap_mcbsp_count++;
 	return 0;
 }
 
 static int __init omap2_mcbsp_init(void)
 {
 	omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL);
 
-	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
-								GFP_KERNEL);
-	if (!mcbsp_ptr)
-		return -ENOMEM;
-
-	return omap_mcbsp_init();
+	return 0;
 }
 arch_initcall(omap2_mcbsp_init);

trunk/arch/arm/plat-omap/Kconfig

@@ -110,14 +110,6 @@ config OMAP_MUX_WARNINGS
 	  to change the pin multiplexing setup.	 When there are no warnings
 	  printed, it's safe to deselect OMAP_MUX for your product.
 
-config OMAP_MCBSP
-	bool "McBSP support"
-	depends on ARCH_OMAP
-	default y
-	help
-	  Say Y here if you want support for the OMAP Multichannel
-	  Buffered Serial Port.
-
 config OMAP_MBOX_FWK
 	tristate "Mailbox framework support"
 	depends on ARCH_OMAP

trunk/arch/arm/plat-omap/Makefile

@@ -17,8 +17,6 @@ obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
 obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
 obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
 
-obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
-
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o