---

yaml
---
r: 359425
b: refs/heads/master
c: 2a7d2b9
h: refs/heads/master
i:
  359423: afe6e6d
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: b67bfe0d42cac56c512dd5da4b1b347a23f4b70a
+refs/heads/master: 2a7d2b96d5cba7568139d9ab157a0e97ab32440f

trunk/Documentation/coccinelle.txt

@@ -87,6 +87,10 @@ As any static code analyzer, Coccinelle produces false
 positives. Thus, reports must be carefully checked, and patches
 reviewed.
 
+To enable verbose messages set the V= variable, for example:
+
+   make coccicheck MODE=report V=1
+
 
  Using Coccinelle with a single semantic patch
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

trunk/Documentation/kbuild/kconfig-language.txt

@@ -388,26 +388,3 @@ config FOO
 	depends on BAR && m
 
 limits FOO to module (=m) or disabled (=n).
-
-Kconfig symbol existence
-~~~~~~~~~~~~~~~~~~~~~~~~
-The following two methods produce the same kconfig symbol dependencies
-but differ greatly in kconfig symbol existence (production) in the
-generated config file.
-
-case 1:
-
-config FOO
-	tristate "about foo"
-	depends on BAR
-
-vs. case 2:
-
-if BAR
-config FOO
-	tristate "about foo"
-endif
-
-In case 1, the symbol FOO will always exist in the config file (given
-no other dependencies).  In case 2, the symbol FOO will only exist in
-the config file if BAR is enabled.

trunk/Documentation/kbuild/kconfig.txt

@@ -46,6 +46,12 @@ KCONFIG_OVERWRITECONFIG
 If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not
 break symlinks when .config is a symlink to somewhere else.
 
+CONFIG_
+--------------------------------------------------
+If you set CONFIG_ in the environment, Kconfig will prefix all symbols
+with its value when saving the configuration, instead of using the default,
+"CONFIG_".
+
 ______________________________________________________________________
 Environment variables for '{allyes/allmod/allno/rand}config'
 

trunk/Documentation/kernel-parameters.txt

@@ -564,6 +564,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			UART at the specified I/O port or MMIO address,
 			switching to the matching ttyS device later.  The
 			options are the same as for ttyS, above.
+		hvc<n>	Use the hypervisor console device <n>. This is for
+			both Xen and PowerPC hypervisors.
 
                 If the device connected to the port is not a TTY but a braille
                 device, prepend "brl," before the device type, for instance
@@ -757,6 +759,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
+			earlyprintk=xen
 			earlyprintk=serial[,ttySn[,baudrate]]
 			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
@@ -774,6 +777,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			The VGA output is eventually overwritten by the real
 			console.
 
+			The xen output can only be used by Xen PV guests.
+
 	ekgdboc=	[X86,KGDB] Allow early kernel console debugging
 			ekgdboc=kbd
 

trunk/Makefile

@@ -192,7 +192,6 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
 # "make" in the configured kernel build directory always uses that.
 # Default value for CROSS_COMPILE is not to prefix executables
 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
-export KBUILD_BUILDHOST := $(SUBARCH)
 ARCH		?= $(SUBARCH)
 CROSS_COMPILE	?= $(CONFIG_CROSS_COMPILE:"%"=%)
 
@@ -620,7 +619,8 @@ KBUILD_AFLAGS	+= -gdwarf-2
 endif
 
 ifdef CONFIG_DEBUG_INFO_REDUCED
-KBUILD_CFLAGS 	+= $(call cc-option, -femit-struct-debug-baseonly)
+KBUILD_CFLAGS 	+= $(call cc-option, -femit-struct-debug-baseonly) \
+		   $(call cc-option,-fno-var-tracking)
 endif
 
 ifdef CONFIG_FUNCTION_TRACER
@@ -1398,7 +1398,7 @@ quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files))
 # Run depmod only if we have System.map and depmod is executable
 quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
       cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
-                   $(KERNELRELEASE)
+                   $(KERNELRELEASE) "$(patsubst "%",%,$(CONFIG_SYMBOL_PREFIX))"
 
 # Create temporary dir for module support files
 # clean it up only when building all modules

trunk/arch/x86/boot/compressed/eboot.c

@@ -19,23 +19,28 @@
 
 static efi_system_table_t *sys_table;
 
+static void efi_char16_printk(efi_char16_t *str)
+{
+	struct efi_simple_text_output_protocol *out;
+
+	out = (struct efi_simple_text_output_protocol *)sys_table->con_out;
+	efi_call_phys2(out->output_string, out, str);
+}
+
 static void efi_printk(char *str)
 {
 	char *s8;
 
 	for (s8 = str; *s8; s8++) {
-		struct efi_simple_text_output_protocol *out;
 		efi_char16_t ch[2] = { 0 };
 
 		ch[0] = *s8;
-		out = (struct efi_simple_text_output_protocol *)sys_table->con_out;
-
 		if (*s8 == '\n') {
 			efi_char16_t nl[2] = { '\r', 0 };
-			efi_call_phys2(out->output_string, out, nl);
+			efi_char16_printk(nl);
 		}
 
-		efi_call_phys2(out->output_string, out, ch);
+		efi_char16_printk(ch);
 	}
 }
 
@@ -709,7 +714,12 @@ static efi_status_t handle_ramdisks(efi_loaded_image_t *image,
 			if ((u8 *)p >= (u8 *)filename_16 + sizeof(filename_16))
 				break;
 
-			*p++ = *str++;
+			if (*str == '/') {
+				*p++ = '\\';
+				*str++;
+			} else {
+				*p++ = *str++;
+			}
 		}
 
 		*p = '\0';
@@ -737,7 +747,9 @@ static efi_status_t handle_ramdisks(efi_loaded_image_t *image,
 		status = efi_call_phys5(fh->open, fh, &h, filename_16,
 					EFI_FILE_MODE_READ, (u64)0);
 		if (status != EFI_SUCCESS) {
-			efi_printk("Failed to open initrd file\n");
+			efi_printk("Failed to open initrd file: ");
+			efi_char16_printk(filename_16);
+			efi_printk("\n");
 			goto close_handles;
 		}
 

trunk/arch/x86/include/asm/efi.h

@@ -102,7 +102,14 @@ extern void efi_call_phys_epilog(void);
 extern void efi_unmap_memmap(void);
 extern void efi_memory_uc(u64 addr, unsigned long size);
 
-#ifndef CONFIG_EFI
+#ifdef CONFIG_EFI
+
+static inline bool efi_is_native(void)
+{
+	return IS_ENABLED(CONFIG_X86_64) == efi_enabled(EFI_64BIT);
+}
+
+#else
 /*
  * IF EFI is not configured, have the EFI calls return -ENOSYS.
  */

trunk/arch/x86/kernel/head.c

@@ -5,8 +5,6 @@
 #include <asm/setup.h>
 #include <asm/bios_ebda.h>
 
-#define BIOS_LOWMEM_KILOBYTES 0x413
-
 /*
  * The BIOS places the EBDA/XBDA at the top of conventional
  * memory, and usually decreases the reported amount of
@@ -16,17 +14,30 @@
  * chipset: reserve a page before VGA to prevent PCI prefetch
  * into it (errata #56). Usually the page is reserved anyways,
  * unless you have no PS/2 mouse plugged in.
+ *
+ * This functions is deliberately very conservative.  Losing
+ * memory in the bottom megabyte is rarely a problem, as long
+ * as we have enough memory to install the trampoline.  Using
+ * memory that is in use by the BIOS or by some DMA device
+ * the BIOS didn't shut down *is* a big problem.
  */
+
+#define BIOS_LOWMEM_KILOBYTES	0x413
+#define LOWMEM_CAP		0x9f000U	/* Absolute maximum */
+#define INSANE_CUTOFF		0x20000U	/* Less than this = insane */
+
 void __init reserve_ebda_region(void)
 {
 	unsigned int lowmem, ebda_addr;
 
-	/* To determine the position of the EBDA and the */
-	/* end of conventional memory, we need to look at */
-	/* the BIOS data area. In a paravirtual environment */
-	/* that area is absent. We'll just have to assume */
-	/* that the paravirt case can handle memory setup */
-	/* correctly, without our help. */
+	/*
+	 * To determine the position of the EBDA and the
+	 * end of conventional memory, we need to look at
+	 * the BIOS data area. In a paravirtual environment
+	 * that area is absent. We'll just have to assume
+	 * that the paravirt case can handle memory setup
+	 * correctly, without our help.
+	 */
 	if (paravirt_enabled())
 		return;
 
@@ -37,19 +48,23 @@ void __init reserve_ebda_region(void)
 	/* start of EBDA area */
 	ebda_addr = get_bios_ebda();
 
-	/* Fixup: bios puts an EBDA in the top 64K segment */
-	/* of conventional memory, but does not adjust lowmem. */
-	if ((lowmem - ebda_addr) <= 0x10000)
-		lowmem = ebda_addr;
+	/*
+	 * Note: some old Dells seem to need 4k EBDA without
+	 * reporting so, so just consider the memory above 0x9f000
+	 * to be off limits (bugzilla 2990).
+	 */
+
+	/* If the EBDA address is below 128K, assume it is bogus */
+	if (ebda_addr < INSANE_CUTOFF)
+		ebda_addr = LOWMEM_CAP;
 
-	/* Fixup: bios does not report an EBDA at all. */
-	/* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
-	if ((ebda_addr == 0) && (lowmem >= 0x9f000))
-		lowmem = 0x9f000;
+	/* If lowmem is less than 128K, assume it is bogus */
+	if (lowmem < INSANE_CUTOFF)
+		lowmem = LOWMEM_CAP;
 
-	/* Paranoia: should never happen, but... */
-	if ((lowmem == 0) || (lowmem >= 0x100000))
-		lowmem = 0x9f000;
+	/* Use the lower of the lowmem and EBDA markers as the cutoff */
+	lowmem = min(lowmem, ebda_addr);
+	lowmem = min(lowmem, LOWMEM_CAP); /* Absolute cap */
 
 	/* reserve all memory between lowmem and the 1MB mark */
 	memblock_reserve(lowmem, 0x100000 - lowmem);

trunk/arch/x86/kernel/head_64.S

@@ -48,7 +48,7 @@ L3_START_KERNEL = pud_index(__START_KERNEL_map)
 	.globl startup_64
 startup_64:
 	/*
-	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1,
+	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
 	 * and someone has loaded an identity mapped page table
 	 * for us.  These identity mapped page tables map all of the
 	 * kernel pages and possibly all of memory.
@@ -159,7 +159,7 @@ startup_64:
 	jmp 1f
 ENTRY(secondary_startup_64)
 	/*
-	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1,
+	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
 	 * and someone has loaded a mapped page table.
 	 *
 	 * %rsi holds a physical pointer to real_mode_data.

trunk/arch/x86/kernel/setup.c

@@ -1196,8 +1196,7 @@ void __init setup_arch(char **cmdline_p)
 	 * mismatched firmware/kernel archtectures since there is no
 	 * support for runtime services.
 	 */
-	if (efi_enabled(EFI_BOOT) &&
-	    IS_ENABLED(CONFIG_X86_64) != efi_enabled(EFI_64BIT)) {
+	if (efi_enabled(EFI_BOOT) && !efi_is_native()) {
 		pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n");
 		efi_unmap_memmap();
 	}

trunk/arch/x86/platform/efi/efi.c

@@ -69,11 +69,6 @@ struct efi_memory_map memmap;
 static struct efi efi_phys __initdata;
 static efi_system_table_t efi_systab __initdata;
 
-static inline bool efi_is_native(void)
-{
-	return IS_ENABLED(CONFIG_X86_64) == efi_enabled(EFI_64BIT);
-}
-
 unsigned long x86_efi_facility;
 
 /*
@@ -85,7 +80,7 @@ int efi_enabled(int facility)
 }
 EXPORT_SYMBOL(efi_enabled);
 
-static bool disable_runtime = false;
+static bool __initdata disable_runtime = false;
 static int __init setup_noefi(char *arg)
 {
 	disable_runtime = true;

trunk/drivers/acpi/Kconfig

@@ -266,7 +266,8 @@ config ACPI_CUSTOM_DSDT
 	default ACPI_CUSTOM_DSDT_FILE != ""
 
 config ACPI_INITRD_TABLE_OVERRIDE
-	bool "ACPI tables can be passed via uncompressed cpio in initrd"
+	bool "ACPI tables override via initrd"
+	depends on BLK_DEV_INITRD && X86
 	default n
 	help
 	  This option provides functionality to override arbitrary ACPI tables