---

yaml
---
r: 102574
b: refs/heads/master
c: 566bfe5
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: fac371d9f09f461dfe9fbbceb2a38e2e12164dda
+refs/heads/master: 566bfe5a8bcde13188a356f77666f8115813cf31

trunk/drivers/net/wireless/adm8211.c

@@ -445,9 +445,9 @@ static void adm8211_interrupt_rci(struct ieee80211_hw *dev)
 			struct ieee80211_rx_status rx_status = {0};
 
 			if (priv->pdev->revision < ADM8211_REV_CA)
-				rx_status.ssi = rssi;
+				rx_status.signal = rssi;
 			else
-				rx_status.ssi = 100 - rssi;
+				rx_status.signal = 100 - rssi;
 
 			rx_status.rate_idx = rate;
 
@@ -1893,9 +1893,10 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
 
 	dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr);
 	/* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
+	dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
 
 	dev->channel_change_time = 1000;
-	dev->max_rssi = 100;	/* FIXME: find better value */
+	dev->max_signal = 100;    /* FIXME: find better value */
 
 	dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */
 

trunk/drivers/net/wireless/ath5k/base.c

@@ -458,13 +458,11 @@ ath5k_pci_probe(struct pci_dev *pdev,
 
 	/* Initialize driver private data */
 	SET_IEEE80211_DEV(hw, &pdev->dev);
-	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS;
+	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+		    IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_NOISE_DBM;
 	hw->extra_tx_headroom = 2;
 	hw->channel_change_time = 5000;
-	/* these names are misleading */
-	hw->max_rssi = -110; /* signal in dBm */
-	hw->max_noise = -110; /* noise in dBm */
-	hw->max_signal = 100; /* we will provide a percentage based on rssi */
 	sc = hw->priv;
 	sc->hw = hw;
 	sc->pdev = pdev;
@@ -1893,20 +1891,9 @@ ath5k_tasklet_rx(unsigned long data)
 		rxs.freq = sc->curchan->center_freq;
 		rxs.band = sc->curband->band;
 
-		/*
-		 * signal quality:
-		 * the names here are misleading and the usage of these
-		 * values by iwconfig makes it even worse
-		 */
-		/* noise floor in dBm, from the last noise calibration */
 		rxs.noise = sc->ah->ah_noise_floor;
-		/* signal level in dBm */
-		rxs.ssi = rxs.noise + rs.rs_rssi;
-		/*
-		 * "signal" is actually displayed as Link Quality by iwconfig
-		 * we provide a percentage based on rssi (assuming max rssi 64)
-		 */
-		rxs.signal = rs.rs_rssi * 100 / 64;
+		rxs.signal = rxs.noise + rs.rs_rssi;
+		rxs.qual = rs.rs_rssi * 100 / 64;
 
 		rxs.antenna = rs.rs_antenna;
 		rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate);

trunk/drivers/net/wireless/b43/main.c

@@ -4466,10 +4466,10 @@ static int b43_wireless_init(struct ssb_device *dev)
 
 	/* fill hw info */
 	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_RX_INCLUDES_FCS;
-	hw->max_signal = 100;
-	hw->max_rssi = -110;
-	hw->max_noise = -110;
+		    IEEE80211_HW_RX_INCLUDES_FCS |
+		    IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_NOISE_DBM;
+
 	hw->queues = b43_modparam_qos ? 4 : 1;
 	SET_IEEE80211_DEV(hw, dev->dev);
 	if (is_valid_ether_addr(sprom->et1mac))

trunk/drivers/net/wireless/b43/xmit.c

@@ -581,12 +581,11 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 		//      and also find out what the maximum possible value is.
 		//      Fill status.ssi and status.signal fields.
 	} else {
-		status.ssi = b43_rssi_postprocess(dev, rxhdr->jssi,
+		status.signal = b43_rssi_postprocess(dev, rxhdr->jssi,
 						  (phystat0 & B43_RX_PHYST0_OFDM),
 						  (phystat0 & B43_RX_PHYST0_GAINCTL),
 						  (phystat3 & B43_RX_PHYST3_TRSTATE));
-		/* the next line looks wrong, but is what mac80211 wants */
-		status.signal = (rxhdr->jssi * 100) / B43_RX_MAX_SSI;
+		status.qual = (rxhdr->jssi * 100) / B43_RX_MAX_SSI;
 	}
 
 	if (phystat0 & B43_RX_PHYST0_OFDM)

trunk/drivers/net/wireless/b43legacy/main.c

@@ -3718,10 +3718,9 @@ static int b43legacy_wireless_init(struct ssb_device *dev)
 
 	/* fill hw info */
 	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-		    IEEE80211_HW_RX_INCLUDES_FCS;
-	hw->max_signal = 100;
-	hw->max_rssi = -110;
-	hw->max_noise = -110;
+		    IEEE80211_HW_RX_INCLUDES_FCS |
+		    IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_NOISE_DBM;
 	hw->queues = 1; /* FIXME: hardware has more queues */
 	SET_IEEE80211_DEV(hw, dev->dev);
 	if (is_valid_ether_addr(sprom->et1mac))

trunk/drivers/net/wireless/b43legacy/xmit.c

@@ -532,12 +532,12 @@ void b43legacy_rx(struct b43legacy_wldev *dev,
 		}
 	}
 
-	status.ssi = b43legacy_rssi_postprocess(dev, jssi,
+	status.signal = b43legacy_rssi_postprocess(dev, jssi,
 				      (phystat0 & B43legacy_RX_PHYST0_OFDM),
 				      (phystat0 & B43legacy_RX_PHYST0_GAINCTL),
 				      (phystat3 & B43legacy_RX_PHYST3_TRSTATE));
 	status.noise = dev->stats.link_noise;
-	status.signal = (jssi * 100) / B43legacy_RX_MAX_SSI;
+	status.qual = (jssi * 100) / B43legacy_RX_MAX_SSI;
 	/* change to support A PHY */
 	if (phystat0 & B43legacy_RX_PHYST0_OFDM)
 		status.rate_idx = b43legacy_plcp_get_bitrate_idx_ofdm(plcp, false);

trunk/drivers/net/wireless/iwlwifi/iwl-3945.c

@@ -520,7 +520,7 @@ static void iwl3945_add_radiotap(struct iwl3945_priv *priv,
 {
 	/* First cache any information we need before we overwrite
 	 * the information provided in the skb from the hardware */
-	s8 signal = stats->ssi;
+	s8 signal = stats->signal;
 	s8 noise = 0;
 	int rate = stats->rate_idx;
 	u64 tsf = stats->mactime;
@@ -693,7 +693,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 	}
 
 	/* Convert 3945's rssi indicator to dBm */
-	rx_status.ssi = rx_stats->rssi - IWL_RSSI_OFFSET;
+	rx_status.signal = rx_stats->rssi - IWL_RSSI_OFFSET;
 
 	/* Set default noise value to -127 */
 	if (priv->last_rx_noise == 0)
@@ -712,21 +712,21 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 	 * Calculate rx_status.signal (quality indicator in %) based on SNR. */
 	if (rx_stats_noise_diff) {
 		snr = rx_stats_sig_avg / rx_stats_noise_diff;
-		rx_status.noise = rx_status.ssi -
+		rx_status.noise = rx_status.signal -
 					iwl3945_calc_db_from_ratio(snr);
-		rx_status.signal = iwl3945_calc_sig_qual(rx_status.ssi,
+		rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal,
 							 rx_status.noise);
 
 	/* If noise info not available, calculate signal quality indicator (%)
 	 *   using just the dBm signal level. */
 	} else {
 		rx_status.noise = priv->last_rx_noise;
-		rx_status.signal = iwl3945_calc_sig_qual(rx_status.ssi, 0);
+		rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0);
 	}
 
 
 	IWL_DEBUG_STATS("Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
-			rx_status.ssi, rx_status.noise, rx_status.signal,
+			rx_status.signal, rx_status.noise, rx_status.qual,
 			rx_stats_sig_avg, rx_stats_noise_diff);
 
 	header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
@@ -736,8 +736,8 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 	IWL_DEBUG_STATS_LIMIT("[%c] %d RSSI:%d Signal:%u, Noise:%u, Rate:%u\n",
 			      network_packet ? '*' : ' ',
 			      le16_to_cpu(rx_hdr->channel),
-			      rx_status.ssi, rx_status.ssi,
-			      rx_status.ssi, rx_status.rate_idx);
+			      rx_status.signal, rx_status.signal,
+			      rx_status.noise, rx_status.rate_idx);
 
 #ifdef CONFIG_IWL3945_DEBUG
 	if (iwl3945_debug_level & (IWL_DL_RX))
@@ -748,7 +748,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 	if (network_packet) {
 		priv->last_beacon_time = le32_to_cpu(rx_end->beacon_timestamp);
 		priv->last_tsf = le64_to_cpu(rx_end->timestamp);
-		priv->last_rx_rssi = rx_status.ssi;
+		priv->last_rx_rssi = rx_status.signal;
 		priv->last_rx_noise = rx_status.noise;
 	}
 

trunk/drivers/net/wireless/iwlwifi/iwl-4965.c

@@ -2362,7 +2362,7 @@ static void iwl4965_add_radiotap(struct iwl_priv *priv,
 				 struct ieee80211_rx_status *stats,
 				 u32 ampdu_status)
 {
-	s8 signal = stats->ssi;
+	s8 signal = stats->signal;
 	s8 noise = 0;
 	int rate = stats->rate_idx;
 	u64 tsf = stats->mactime;
@@ -2963,7 +2963,7 @@ static void iwl4965_rx_reply_rx(struct iwl_priv *priv,
 	priv->ucode_beacon_time = le32_to_cpu(rx_start->beacon_time_stamp);
 
 	/* Find max signal strength (dBm) among 3 antenna/receiver chains */
-	rx_status.ssi = iwl4965_calc_rssi(priv, rx_start);
+	rx_status.signal = iwl4965_calc_rssi(priv, rx_start);
 
 	/* Meaningful noise values are available only from beacon statistics,
 	 *   which are gathered only when associated, and indicate noise
@@ -2972,11 +2972,11 @@ static void iwl4965_rx_reply_rx(struct iwl_priv *priv,
 	if (iwl_is_associated(priv) &&
 	    !test_bit(STATUS_SCANNING, &priv->status)) {
 		rx_status.noise = priv->last_rx_noise;
-		rx_status.signal = iwl4965_calc_sig_qual(rx_status.ssi,
+		rx_status.qual = iwl4965_calc_sig_qual(rx_status.signal,
 							 rx_status.noise);
 	} else {
 		rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
-		rx_status.signal = iwl4965_calc_sig_qual(rx_status.ssi, 0);
+		rx_status.qual = iwl4965_calc_sig_qual(rx_status.signal, 0);
 	}
 
 	/* Reset beacon noise level if not associated. */
@@ -2988,7 +2988,7 @@ static void iwl4965_rx_reply_rx(struct iwl_priv *priv,
 	iwl4965_dbg_report_frame(priv, pkt, header, 1);
 
 	IWL_DEBUG_STATS_LIMIT("Rssi %d, noise %d, qual %d, TSF %llu\n",
-			      rx_status.ssi, rx_status.noise, rx_status.signal,
+			      rx_status.signal, rx_status.noise, rx_status.signal,
 			      (unsigned long long)rx_status.mactime);
 
 
@@ -3000,7 +3000,7 @@ static void iwl4965_rx_reply_rx(struct iwl_priv *priv,
 
 	network_packet = iwl4965_is_network_packet(priv, header);
 	if (network_packet) {
-		priv->last_rx_rssi = rx_status.ssi;
+		priv->last_rx_rssi = rx_status.signal;
 		priv->last_beacon_time =  priv->ucode_beacon_time;
 		priv->last_tsf = le64_to_cpu(rx_start->timestamp);
 	}

trunk/drivers/net/wireless/iwlwifi/iwl-core.c

@@ -746,18 +746,10 @@ static void iwlcore_init_hw(struct iwl_priv *priv)
 	struct ieee80211_hw *hw = priv->hw;
 	hw->rate_control_algorithm = "iwl-4965-rs";
 
-	/* Tell mac80211 and its clients (e.g. Wireless Extensions)
-	 *	 the range of signal quality values that we'll provide.
-	 * Negative values for level/noise indicate that we'll provide dBm.
-	 * For WE, at least, non-0 values here *enable* display of values
-	 *	 in app (iwconfig). */
-	hw->max_rssi = -20; /* signal level, negative indicates dBm */
-	hw->max_noise = -20;	/* noise level, negative indicates dBm */
-	hw->max_signal = 100;	/* link quality indication (%) */
-
-	/* Tell mac80211 our Tx characteristics */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
-
+	/* Tell mac80211 our characteristics */
+	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
+		    IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_NOISE_DBM;
 	/* Default value; 4 EDCA QOS priorities */
 	hw->queues = 4;
 #ifdef CONFIG_IWL4965_HT

trunk/drivers/net/wireless/iwlwifi/iwl3945-base.c

@@ -8029,17 +8029,10 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 
 	priv->ibss_beacon = NULL;
 
-	/* Tell mac80211 and its clients (e.g. Wireless Extensions)
-	 *   the range of signal quality values that we'll provide.
-	 * Negative values for level/noise indicate that we'll provide dBm.
-	 * For WE, at least, non-0 values here *enable* display of values
-	 *   in app (iwconfig). */
-	hw->max_rssi = -20;	/* signal level, negative indicates dBm */
-	hw->max_noise = -20;	/* noise level, negative indicates dBm */
-	hw->max_signal = 100;	/* link quality indication (%) */
-
-	/* Tell mac80211 our Tx characteristics */
-	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE;
+	/* Tell mac80211 our characteristics */
+	hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
+		    IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_NOISE_DBM;
 
 	/* 4 EDCA QOS priorities */
 	hw->queues = 4;

trunk/drivers/net/wireless/p54/p54common.c

@@ -355,7 +355,7 @@ static void p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct ieee80211_rx_status rx_status = {0};
 	u16 freq = le16_to_cpu(hdr->freq);
 
-	rx_status.ssi = hdr->rssi;
+	rx_status.signal = hdr->rssi;
 	/* XX correct? */
 	rx_status.rate_idx = hdr->rate & 0xf;
 	rx_status.freq = freq;
@@ -1000,9 +1000,10 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
 	skb_queue_head_init(&priv->tx_queue);
 	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz;
 	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | /* not sure */
-		    IEEE80211_HW_RX_INCLUDES_FCS;
+		     IEEE80211_HW_RX_INCLUDES_FCS |
+		     IEEE80211_HW_SIGNAL_UNSPEC;
 	dev->channel_change_time = 1000;	/* TODO: find actual value */
-	dev->max_rssi = 127;
+	dev->max_signal = 127;
 
 	priv->tx_stats[0].limit = 5;
 	dev->queues = 1;

trunk/drivers/net/wireless/rt2x00/rt2400pci.c

@@ -1361,10 +1361,9 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize all hw fields.
 	 */
-	rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+	rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+			       IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = 0;
-	rt2x00dev->hw->max_signal = MAX_SIGNAL;
-	rt2x00dev->hw->max_rssi = MAX_RX_SSI;
 	rt2x00dev->hw->queues = 2;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);

trunk/drivers/net/wireless/rt2x00/rt2500pci.c

@@ -1680,10 +1680,10 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize all hw fields.
 	 */
-	rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+	rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+			       IEEE80211_HW_SIGNAL_DBM;
+
 	rt2x00dev->hw->extra_tx_headroom = 0;
-	rt2x00dev->hw->max_signal = MAX_SIGNAL;
-	rt2x00dev->hw->max_rssi = MAX_RX_SSI;
 	rt2x00dev->hw->queues = 2;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);

trunk/drivers/net/wireless/rt2x00/rt2500usb.c

@@ -1587,10 +1587,10 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	rt2x00dev->hw->flags =
 	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
 	    IEEE80211_HW_RX_INCLUDES_FCS |
-	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+	    IEEE80211_HW_SIGNAL_DBM;
+
 	rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
-	rt2x00dev->hw->max_signal = MAX_SIGNAL;
-	rt2x00dev->hw->max_rssi = MAX_RX_SSI;
 	rt2x00dev->hw->queues = 2;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);

trunk/drivers/net/wireless/rt2x00/rt2x00dev.c

@@ -600,9 +600,9 @@ void rt2x00lib_rxdone(struct queue_entry *entry,
 	rt2x00dev->link.qual.rx_success++;
 
 	rx_status->rate_idx = idx;
-	rx_status->signal =
+	rx_status->qual =
 	    rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc->rssi);
-	rx_status->ssi = rxdesc->rssi;
+	rx_status->signal = rxdesc->rssi;
 	rx_status->flag = rxdesc->flags;
 	rx_status->antenna = rt2x00dev->link.ant.active.rx;
 

trunk/drivers/net/wireless/rt2x00/rt61pci.c

@@ -2245,10 +2245,9 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00dev->hw->flags =
 	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+	    IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = 0;
-	rt2x00dev->hw->max_signal = MAX_SIGNAL;
-	rt2x00dev->hw->max_rssi = MAX_RX_SSI;
 	rt2x00dev->hw->queues = 4;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);

trunk/drivers/net/wireless/rt2x00/rt73usb.c

@@ -1830,10 +1830,9 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00dev->hw->flags =
 	    IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
-	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+	    IEEE80211_HW_SIGNAL_DBM;
 	rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
-	rt2x00dev->hw->max_signal = MAX_SIGNAL;
-	rt2x00dev->hw->max_rssi = MAX_RX_SSI;
 	rt2x00dev->hw->queues = 4;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);