---

yaml
---
r: 223587
b: refs/heads/master
c: 388c4bc
h: refs/heads/master
i:
  223585: 7c160b3
  223583: 4e26fcd
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 55fb78a3a80348d87b2e3d79f61f8a9252dd86f5
+refs/heads/master: 388c4bcb4e63e88fb1f312a2f5f9eb2623afcf5b

trunk/Documentation/ABI/testing/sysfs-platform-asus-laptop

@@ -47,20 +47,6 @@ Date:		January 2007
 KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
-		Control the wlan device. 1 means on, 0 means off.
+		Control the bluetooth device. 1 means on, 0 means off.
 		This may control the led, the device or both.
 Users:		Lapsus
-
-What:		/sys/devices/platform/asus_laptop/wimax
-Date:		October 2010
-KernelVersion:	2.6.37
-Contact:	"Corentin Chary" <corentincj@iksaif.net>
-Description:
-		Control the wimax device. 1 means on, 0 means off.
-
-What:		/sys/devices/platform/asus_laptop/wwan
-Date:		October 2010
-KernelVersion:	2.6.37
-Contact:	"Corentin Chary" <corentincj@iksaif.net>
-Description:
-		Control the wwan (3G) device. 1 means on, 0 means off.

trunk/Documentation/accounting/getdelays.c

@@ -516,7 +516,6 @@ int main(int argc, char *argv[])
 			default:
 				fprintf(stderr, "Unknown nla_type %d\n",
 					na->nla_type);
-			case TASKSTATS_TYPE_NULL:
 				break;
 			}
 			na = (struct nlattr *) (GENLMSG_DATA(&msg) + len);

trunk/Documentation/filesystems/Locking

@@ -173,13 +173,12 @@ prototypes:
 	sector_t (*bmap)(struct address_space *, sector_t);
 	int (*invalidatepage) (struct page *, unsigned long);
 	int (*releasepage) (struct page *, int);
-	void (*freepage)(struct page *);
 	int (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
 			loff_t offset, unsigned long nr_segs);
 	int (*launder_page) (struct page *);
 
 locking rules:
-	All except set_page_dirty and freepage may block
+	All except set_page_dirty may block
 
 			BKL	PageLocked(page)	i_mutex
 writepage:		no	yes, unlocks (see below)
@@ -194,7 +193,6 @@ perform_write:		no	n/a			yes
 bmap:			no
 invalidatepage:		no	yes
 releasepage:		no	yes
-freepage:		no	yes
 direct_IO:		no
 launder_page:		no	yes
 
@@ -290,9 +288,6 @@ buffers from the page in preparation for freeing it.  It returns zero to
 indicate that the buffers are (or may be) freeable.  If ->releasepage is zero,
 the kernel assumes that the fs has no private interest in the buffers.
 
-	->freepage() is called when the kernel is done dropping the page
-from the page cache.
-
 	->launder_page() may be called prior to releasing a page if
 it is still found to be dirty. It returns zero if the page was successfully
 cleaned, or an error value if not. Note that in order to prevent the page

trunk/Documentation/filesystems/vfs.txt

@@ -534,7 +534,6 @@ struct address_space_operations {
 	sector_t (*bmap)(struct address_space *, sector_t);
 	int (*invalidatepage) (struct page *, unsigned long);
 	int (*releasepage) (struct page *, int);
-	void (*freepage)(struct page *);
 	ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
 			loff_t offset, unsigned long nr_segs);
 	struct page* (*get_xip_page)(struct address_space *, sector_t,
@@ -679,12 +678,6 @@ struct address_space_operations {
         need to ensure this.  Possibly it can clear the PageUptodate
         bit if it cannot free private data yet.
 
-  freepage: freepage is called once the page is no longer visible in
-        the page cache in order to allow the cleanup of any private
-	data. Since it may be called by the memory reclaimer, it
-	should not assume that the original address_space mapping still
-	exists, and it should not block.
-
   direct_IO: called by the generic read/write routines to perform
         direct_IO - that is IO requests which bypass the page cache
         and transfer data directly between the storage and the

trunk/Documentation/kernel-parameters.txt

@@ -2175,6 +2175,11 @@ and is between 256 and 4096 characters. It is defined in the file
 	reset_devices	[KNL] Force drivers to reset the underlying device
 			during initialization.
 
+	resource_alloc_from_bottom
+			Allocate new resources from the beginning of available
+			space, not the end.  If you need to use this, please
+			report a bug.
+
 	resume=		[SWSUSP]
 			Specify the partition device for software suspend
 

trunk/Documentation/power/runtime_pm.txt

@@ -379,8 +379,8 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       zero)
 
   bool pm_runtime_suspended(struct device *dev);
-    - return true if the device's runtime PM status is 'suspended' and its
-      'power.disable_depth' field is equal to zero, or false otherwise
+    - return true if the device's runtime PM status is 'suspended', or false
+      otherwise
 
   void pm_runtime_allow(struct device *dev);
     - set the power.runtime_auto flag for the device and decrease its usage

trunk/Documentation/trace/postprocess/trace-vmscan-postprocess.pl

@@ -373,18 +373,9 @@ sub process_events {
 				print "         $regex_lru_isolate/o\n";
 				next;
 			}
-			my $isolate_mode = $1;
 			my $nr_scanned = $4;
 			my $nr_contig_dirty = $7;
-
-			# To closer match vmstat scanning statistics, only count isolate_both
-			# and isolate_inactive as scanning. isolate_active is rotation
-			# isolate_inactive == 0
-			# isolate_active   == 1
-			# isolate_both     == 2
-			if ($isolate_mode != 1) {
-				$perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
-			}
+			$perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
 			$perprocesspid{$process_pid}->{HIGH_NR_CONTIG_DIRTY} += $nr_contig_dirty;
 		} elsif ($tracepoint eq "mm_vmscan_lru_shrink_inactive") {
 			$details = $5;

trunk/MAINTAINERS

@@ -405,7 +405,7 @@ S:	Supported
 F:	drivers/usb/gadget/amd5536udc.*
 
 AMD GEODE PROCESSOR/CHIPSET SUPPORT
-P:	Andres Salomon <dilinger@queued.net>
+P:	Jordan Crouse
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
 S:	Supported
@@ -559,14 +559,14 @@ W:	http://maxim.org.za/at91_26.html
 S:	Maintained
 
 ARM/BCMRING ARM ARCHITECTURE
-M:	Jiandong Zheng <jdzheng@broadcom.com>
+M:	Leo Chen <leochen@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-bcmring
 
 ARM/BCMRING MTD NAND DRIVER
-M:	Jiandong Zheng <jdzheng@broadcom.com>
+M:	Leo Chen <leochen@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
@@ -815,7 +815,7 @@ F:	drivers/mmc/host/msm_sdcc.c
 F:	drivers/mmc/host/msm_sdcc.h
 F:	drivers/serial/msm_serial.h
 F:	drivers/serial/msm_serial.c
-T:	git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
+T:	git git://codeaurora.org/quic/kernel/dwalker/linux-msm.git
 S:	Maintained
 
 ARM/TOSA MACHINE SUPPORT
@@ -5932,6 +5932,7 @@ F:	include/linux/tty.h
 
 TULIP NETWORK DRIVERS
 M:	Grant Grundler <grundler@parisc-linux.org>
+M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/tulip/
@@ -6583,15 +6584,6 @@ F:	include/linux/mfd/wm8400*
 F:	include/sound/wm????.h
 F:	sound/soc/codecs/wm*
 
-WORKQUEUE
-M:	Tejun Heo <tj@kernel.org>
-L:	linux-kernel@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git
-S:	Maintained
-F:	include/linux/workqueue.h
-F:	kernel/workqueue.c
-F:	Documentation/workqueue.txt
-
 X.25 NETWORK LAYER
 M:	Andrew Hendry <andrew.hendry@gmail.com>
 L:	linux-x25@vger.kernel.org

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 37
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc4
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

trunk/arch/arm/Kconfig

@@ -9,7 +9,7 @@ config ARM
 	select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_ARCH_KGDB
-	select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
+	select HAVE_KPROBES if (!XIP_KERNEL)
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
@@ -1311,7 +1311,7 @@ config HZ
 
 config THUMB2_KERNEL
 	bool "Compile the kernel in Thumb-2 mode"
-	depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
+	depends on CPU_V7 && EXPERIMENTAL
 	select AEABI
 	select ARM_ASM_UNIFIED
 	help
@@ -1759,7 +1759,7 @@ comment "At least one emulation must be selected"
 
 config FPE_NWFPE
 	bool "NWFPE math emulation"
-	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
+	depends on !AEABI || OABI_COMPAT
 	---help---
 	  Say Y to include the NWFPE floating point emulator in the kernel.
 	  This is necessary to run most binaries. Linux does not currently

trunk/arch/arm/boot/Makefile

@@ -70,7 +70,12 @@ else
 $(obj)/uImage: LOADADDR=$(ZRELADDR)
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
+$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
+else
 $(obj)/uImage: STARTADDR=$(LOADADDR)
+endif
 
 $(obj)/uImage:	$(obj)/zImage FORCE
 	$(call if_changed,uimage)

trunk/arch/arm/boot/bootp/init.S

@@ -73,8 +73,6 @@ move:		ldmia	r4!, {r7 - r10}		@ move 32-bytes at a time
 
 		.size	_start, . - _start
 
-		.align
-
 		.type	data,#object
 data:		.word	initrd_start		@ source initrd address
 		.word	initrd_phys		@ destination initrd address

trunk/arch/arm/boot/compressed/head.S

@@ -125,21 +125,16 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
  * sort out different calling conventions
  */
 		.align
-		.arm				@ Always enter in ARM state
 start:
 		.type	start,#function
- THUMB(		adr	r12, BSYM(1f)	)
- THUMB(		bx	r12		)
- THUMB(		.rept	6		)
- ARM(		.rept	8		)
+		.rept	8
 		mov	r0, r0
 		.endr
 
 		b	1f
 		.word	0x016f2818		@ Magic numbers to help the loader
 		.word	start			@ absolute load/run zImage address
 		.word	_edata			@ zImage end address
- THUMB(		.thumb			)
 1:		mov	r7, r1			@ save architecture ID
 		mov	r8, r2			@ save atags pointer
 
@@ -179,8 +174,7 @@ not_angel:
 		ldr	sp, [r0, #28]
 #ifdef CONFIG_AUTO_ZRELADDR
 		@ determine final kernel image address
-		mov	r4, pc
-		and	r4, r4, #0xf8000000
+		and	r4, pc, #0xf8000000
 		add	r4, r4, #TEXT_OFFSET
 #else
 		ldr	r4, =zreladdr
@@ -451,8 +445,7 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
  */
 		mov	r1, #0x1e
 		orr	r1, r1, #3 << 10
-		mov	r2, pc
-		mov	r2, r2, lsr #20
+		mov	r2, pc, lsr #20
 		orr	r1, r1, r2, lsl #20
 		add	r0, r3, r2, lsl #2
 		str	r1, [r0], #4

trunk/arch/arm/common/gic.c

@@ -146,15 +146,9 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 	unsigned int shift = (irq % 4) * 8;
 	unsigned int cpu = cpumask_first(mask_val);
 	u32 val;
-	struct irq_desc *desc;
 
 	spin_lock(&irq_controller_lock);
-	desc = irq_to_desc(irq);
-	if (desc == NULL) {
-		spin_unlock(&irq_controller_lock);
-		return -EINVAL;
-	}
-	desc->node = cpu;
+	irq_desc[irq].node = cpu;
 	val = readl(reg) & ~(0xff << shift);
 	val |= 1 << (cpu + shift);
 	writel(val, reg);
@@ -216,7 +210,7 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
 void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
 			  unsigned int irq_start)
 {
-	unsigned int gic_irqs, irq_limit, i;
+	unsigned int max_irq, i;
 	u32 cpumask = 1 << smp_processor_id();
 
 	if (gic_nr >= MAX_GIC_NR)
@@ -232,49 +226,47 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
 
 	/*
 	 * Find out how many interrupts are supported.
+	 */
+	max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
+	max_irq = (max_irq + 1) * 32;
+
+	/*
 	 * The GIC only supports up to 1020 interrupt sources.
+	 * Limit this to either the architected maximum, or the
+	 * platform maximum.
 	 */
-	gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
-	gic_irqs = (gic_irqs + 1) * 32;
-	if (gic_irqs > 1020)
-		gic_irqs = 1020;
+	if (max_irq > max(1020, NR_IRQS))
+		max_irq = max(1020, NR_IRQS);
 
 	/*
 	 * Set all global interrupts to be level triggered, active low.
 	 */
-	for (i = 32; i < gic_irqs; i += 16)
+	for (i = 32; i < max_irq; i += 16)
 		writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
 
 	/*
 	 * Set all global interrupts to this CPU only.
 	 */
-	for (i = 32; i < gic_irqs; i += 4)
+	for (i = 32; i < max_irq; i += 4)
 		writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
 
 	/*
 	 * Set priority on all global interrupts.
 	 */
-	for (i = 32; i < gic_irqs; i += 4)
+	for (i = 32; i < max_irq; i += 4)
 		writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
 
 	/*
 	 * Disable all interrupts.  Leave the PPI and SGIs alone
 	 * as these enables are banked registers.
 	 */
-	for (i = 32; i < gic_irqs; i += 32)
+	for (i = 32; i < max_irq; i += 32)
 		writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
 
-	/*
-	 * Limit number of interrupts registered to the platform maximum
-	 */
-	irq_limit = gic_data[gic_nr].irq_offset + gic_irqs;
-	if (WARN_ON(irq_limit > NR_IRQS))
-		irq_limit = NR_IRQS;
-
 	/*
 	 * Setup the Linux IRQ subsystem.
 	 */
-	for (i = irq_start; i < irq_limit; i++) {
+	for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
 		set_irq_chip(i, &gic_chip);
 		set_irq_chip_data(i, &gic_data[gic_nr]);
 		set_irq_handler(i, handle_level_irq);