ARM: nomadik: bump all IRQ numbers by one

Since the VIC was converted to use generic IRQ domains IRQ 0
is silently ignored. This IRQ is used on the Nomadik so we're
missing it now. Bump all IRQ numbers by one since they are
now decoupled from the hardware IRQ numbers.

Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/mach-nomadik/include/mach/irqs.h

@@ -22,61 +22,60 @@
 
 #include <mach/hardware.h>
 
-#define IRQ_VIC_START		0	/* first VIC interrupt is 0 */
+#define IRQ_VIC_START		1	/* first VIC interrupt is 1 */
 
 /*
  * Interrupt numbers generic for all Nomadik Chip cuts
  */
-#define IRQ_WATCHDOG			0
-#define IRQ_SOFTINT			1
-#define IRQ_CRYPTO			2
-#define IRQ_OWM				3
-#define IRQ_MTU0			4
-#define IRQ_MTU1			5
-#define IRQ_GPIO0			6
-#define IRQ_GPIO1			7
-#define IRQ_GPIO2			8
-#define IRQ_GPIO3			9
-#define IRQ_RTC_RTT			10
-#define IRQ_SSP				11
-#define IRQ_UART0			12
-#define IRQ_DMA1			13
-#define IRQ_CLCD_MDIF			14
-#define IRQ_DMA0			15
-#define IRQ_PWRFAIL			16
-#define IRQ_UART1			17
-#define IRQ_FIRDA			18
-#define IRQ_MSP0			19
-#define IRQ_I2C0			20
-#define IRQ_I2C1			21
-#define IRQ_SDMMC			22
-#define IRQ_USBOTG			23
-#define IRQ_SVA_IT0			24
-#define IRQ_SVA_IT1			25
-#define IRQ_SAA_IT0			26
-#define IRQ_SAA_IT1			27
-#define IRQ_UART2			28
-#define IRQ_MSP2			31
-#define IRQ_L2CC			48
-#define IRQ_HPI				49
-#define IRQ_SKE				50
-#define IRQ_KP				51
-#define IRQ_MEMST			54
-#define IRQ_SGA_IT			58
-#define IRQ_USBM			60
-#define IRQ_MSP1			62
+#define IRQ_WATCHDOG			1
+#define IRQ_SOFTINT			2
+#define IRQ_CRYPTO			3
+#define IRQ_OWM				4
+#define IRQ_MTU0			5
+#define IRQ_MTU1			6
+#define IRQ_GPIO0			7
+#define IRQ_GPIO1			8
+#define IRQ_GPIO2			9
+#define IRQ_GPIO3			10
+#define IRQ_RTC_RTT			11
+#define IRQ_SSP				12
+#define IRQ_UART0			13
+#define IRQ_DMA1			14
+#define IRQ_CLCD_MDIF			15
+#define IRQ_DMA0			16
+#define IRQ_PWRFAIL			17
+#define IRQ_UART1			18
+#define IRQ_FIRDA			19
+#define IRQ_MSP0			20
+#define IRQ_I2C0			21
+#define IRQ_I2C1			22
+#define IRQ_SDMMC			23
+#define IRQ_USBOTG			24
+#define IRQ_SVA_IT0			25
+#define IRQ_SVA_IT1			26
+#define IRQ_SAA_IT0			27
+#define IRQ_SAA_IT1			28
+#define IRQ_UART2			29
+#define IRQ_MSP2			30
+#define IRQ_L2CC			49
+#define IRQ_HPI				50
+#define IRQ_SKE				51
+#define IRQ_KP				52
+#define IRQ_MEMST			55
+#define IRQ_SGA_IT			59
+#define IRQ_USBM			61
+#define IRQ_MSP1			63
 
-#define NOMADIK_SOC_NR_IRQS		64
+#define NOMADIK_GPIO_OFFSET		(IRQ_VIC_START+64)
 
 /* After chip-specific IRQ numbers we have the GPIO ones */
 #define NOMADIK_NR_GPIO			128 /* last 4 not wired to pins */
-#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + NOMADIK_SOC_NR_IRQS)
-#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - NOMADIK_SOC_NR_IRQS)
+#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + NOMADIK_GPIO_OFFSET)
+#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - NOMADIK_GPIO_OFFSET)
 #define NR_IRQS				NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
 
 /* Following two are used by entry_macro.S, to access our dual-vic */
 #define VIC_REG_IRQSR0		0
 #define VIC_REG_IRQSR1		0x20
 
 #endif /* __ASM_ARCH_IRQS_H */
-