---

yaml
---
r: 174095
b: refs/heads/master
c: ea5697f
h: refs/heads/master
i:
  174093: 13ed61f
  174091: 734baeb
  174087: 887e94c
  174079: 4b22c8e
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ec27b6aafb1796a09aad401143f70ad079421ca4
+refs/heads/master: ea5697fe9ed6a1d534de436eff3138041e3c8aa9

trunk/Documentation/video4linux/CARDLIST.cx23885

@@ -25,3 +25,4 @@
  24 -> Hauppauge WinTV-HVR1850                             [0070:8541]
  25 -> Compro VideoMate E800                               [1858:e800]
  26 -> Hauppauge WinTV-HVR1290                             [0070:8551]
+ 27 -> Mygica X8558 PRO DMB-TH                             [14f1:8578]

trunk/drivers/media/video/cx23885/cx23885-cards.c

@@ -269,6 +269,11 @@ struct cx23885_board cx23885_boards[] = {
 		.name		= "Hauppauge WinTV-HVR1290",
 		.portc		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_MYGICA_X8558PRO] = {
+		.name		= "Mygica X8558 PRO DMB-TH",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -408,6 +413,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x8551,
 		.card      = CX23885_BOARD_HAUPPAUGE_HVR1290,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x8578,
+		.card      = CX23885_BOARD_MYGICA_X8558PRO,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -830,6 +839,15 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		cx23885_gpio_set(dev, GPIO_0 | GPIO_1 | GPIO_2);
 		mdelay(100);
 		break;
+	case CX23885_BOARD_MYGICA_X8558PRO:
+		/* GPIO-0 reset first ATBM8830 */
+		/* GPIO-1 reset second ATBM8830 */
+		cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);
+		cx23885_gpio_clear(dev, GPIO_0 | GPIO_1);
+		mdelay(100);
+		cx23885_gpio_set(dev, GPIO_0 | GPIO_1);
+		mdelay(100);
+		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 		/* GPIO-0 656_CLK */
@@ -1005,6 +1023,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
+	case CX23885_BOARD_MYGICA_X8558PRO:
+		ts1->gen_ctrl_val  = 0x5; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:

trunk/drivers/media/video/cx23885/cx23885-dvb.c

@@ -38,6 +38,7 @@
 #include "tda18271.h"
 #include "lgdt330x.h"
 #include "xc5000.h"
+#include "max2165.h"
 #include "tda10048.h"
 #include "tuner-xc2028.h"
 #include "tuner-simple.h"
@@ -54,6 +55,7 @@
 #include "netup-eeprom.h"
 #include "netup-init.h"
 #include "lgdt3305.h"
+#include "atbm8830.h"
 
 static unsigned int debug;
 
@@ -543,6 +545,38 @@ static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
 	.if_khz = 6500,
 };
 
+static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = {
+	.prod = ATBM8830_PROD_8830,
+	.demod_address = 0x44,
+	.serial_ts = 0,
+	.ts_sampling_edge = 1,
+	.ts_clk_gated = 0,
+	.osc_clk_freq = 30400, /* in kHz */
+	.if_freq = 0, /* zero IF */
+	.zif_swap_iq = 1,
+};
+
+static struct max2165_config mygic_x8558pro_max2165_cfg1 = {
+	.i2c_address = 0x60,
+	.osc_clk = 20
+};
+
+static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = {
+	.prod = ATBM8830_PROD_8830,
+	.demod_address = 0x44,
+	.serial_ts = 1,
+	.ts_sampling_edge = 1,
+	.ts_clk_gated = 0,
+	.osc_clk_freq = 30400, /* in kHz */
+	.if_freq = 0, /* zero IF */
+	.zif_swap_iq = 1,
+};
+
+static struct max2165_config mygic_x8558pro_max2165_cfg2 = {
+	.i2c_address = 0x60,
+	.osc_clk = 20
+};
+
 static int dvb_register(struct cx23885_tsport *port)
 {
 	struct cx23885_dev *dev = port->dev;
@@ -908,6 +942,36 @@ static int dvb_register(struct cx23885_tsport *port)
 				0x60, &dev->i2c_bus[0].i2c_adap,
 				&hauppauge_tda18271_config);
 		break;
+	case CX23885_BOARD_MYGICA_X8558PRO:
+		switch (port->nr) {
+		/* port B */
+		case 1:
+			i2c_bus = &dev->i2c_bus[0];
+			fe0->dvb.frontend = dvb_attach(atbm8830_attach,
+				&mygica_x8558pro_atbm8830_cfg1,
+				&i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend != NULL) {
+				dvb_attach(max2165_attach,
+					fe0->dvb.frontend,
+					&i2c_bus->i2c_adap,
+					&mygic_x8558pro_max2165_cfg1);
+			}
+			break;
+		/* port C */
+		case 2:
+			i2c_bus = &dev->i2c_bus[1];
+			fe0->dvb.frontend = dvb_attach(atbm8830_attach,
+				&mygica_x8558pro_atbm8830_cfg2,
+				&i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend != NULL) {
+				dvb_attach(max2165_attach,
+					fe0->dvb.frontend,
+					&i2c_bus->i2c_adap,
+					&mygic_x8558pro_max2165_cfg2);
+			}
+			break;
+		}
+		break;
 
 	default:
 		printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "

trunk/drivers/media/video/cx23885/cx23885.h

@@ -80,6 +80,7 @@
 #define CX23885_BOARD_HAUPPAUGE_HVR1850        24
 #define CX23885_BOARD_COMPRO_VIDEOMATE_E800    25
 #define CX23885_BOARD_HAUPPAUGE_HVR1290        26
+#define CX23885_BOARD_MYGICA_X8558PRO          27
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002