Staging: comedi: add dt2814 driver

Driver for DataTranslation DT2814

From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/comedi/drivers/dt2814.c

@@ -0,0 +1,381 @@
+/*
+    comedi/drivers/dt2814.c
+    Hardware driver for Data Translation DT2814
+
+    COMEDI - Linux Control and Measurement Device Interface
+    Copyright (C) 1998 David A. Schleef <ds@schleef.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+/*
+Driver: dt2814
+Description: Data Translation DT2814
+Author: ds
+Status: complete
+Devices: [Data Translation] DT2814 (dt2814)
+
+Configuration options:
+  [0] - I/O port base address
+  [1] - IRQ
+
+This card has 16 analog inputs multiplexed onto a 12 bit ADC.  There
+is a minimally useful onboard clock.  The base frequency for the
+clock is selected by jumpers, and the clock divider can be selected
+via programmed I/O.  Unfortunately, the clock divider can only be
+a power of 10, from 1 to 10^7, of which only 3 or 4 are useful.  In
+addition, the clock does not seem to be very accurate.
+*/
+
+#include "../comedidev.h"
+
+#include <linux/ioport.h>
+#include <linux/delay.h>
+
+#define DT2814_SIZE 2
+
+#define DT2814_CSR 0
+#define DT2814_DATA 1
+
+/*
+ * flags
+ */
+
+#define DT2814_FINISH 0x80
+#define DT2814_ERR 0x40
+#define DT2814_BUSY 0x20
+#define DT2814_ENB 0x10
+#define DT2814_CHANMASK 0x0f
+
+static int dt2814_attach(comedi_device * dev, comedi_devconfig * it);
+static int dt2814_detach(comedi_device * dev);
+static comedi_driver driver_dt2814 = {
+      driver_name:"dt2814",
+      module:THIS_MODULE,
+      attach:dt2814_attach,
+      detach:dt2814_detach,
+};
+
+COMEDI_INITCLEANUP(driver_dt2814);
+
+static irqreturn_t dt2814_interrupt(int irq, void *dev PT_REGS_ARG);
+
+typedef struct {
+	int ntrig;
+	int curadchan;
+} dt2814_private;
+#define devpriv ((dt2814_private *)dev->private)
+
+#define DT2814_TIMEOUT 10
+#define DT2814_MAX_SPEED 100000	/* Arbitrary 10 khz limit */
+
+static int dt2814_ai_insn_read(comedi_device * dev, comedi_subdevice * s,
+	comedi_insn * insn, lsampl_t * data)
+{
+	int n, i, hi, lo;
+	int chan;
+	int status = 0;
+
+	for (n = 0; n < insn->n; n++) {
+		chan = CR_CHAN(insn->chanspec);
+
+		outb(chan, dev->iobase + DT2814_CSR);
+		for (i = 0; i < DT2814_TIMEOUT; i++) {
+			status = inb(dev->iobase + DT2814_CSR);
+			printk("dt2814: status: %02x\n", status);
+			comedi_udelay(10);
+			if (status & DT2814_FINISH)
+				break;
+		}
+		if (i >= DT2814_TIMEOUT) {
+			printk("dt2814: status: %02x\n", status);
+			return -ETIMEDOUT;
+		}
+
+		hi = inb(dev->iobase + DT2814_DATA);
+		lo = inb(dev->iobase + DT2814_DATA);
+
+		data[n] = (hi << 4) | (lo >> 4);
+	}
+
+	return n;
+}
+
+static int dt2814_ns_to_timer(unsigned int *ns, unsigned int flags)
+{
+	int i;
+	unsigned int f;
+
+	/* XXX ignores flags */
+
+	f = 10000;		/* ns */
+	for (i = 0; i < 8; i++) {
+		if ((2 * (*ns)) < (f * 11))
+			break;
+		f *= 10;
+	}
+
+	*ns = f;
+
+	return i;
+}
+
+static int dt2814_ai_cmdtest(comedi_device * dev, comedi_subdevice * s,
+	comedi_cmd * cmd)
+{
+	int err = 0;
+	int tmp;
+
+	/* step 1: make sure trigger sources are trivially valid */
+
+	tmp = cmd->start_src;
+	cmd->start_src &= TRIG_NOW;
+	if (!cmd->start_src || tmp != cmd->start_src)
+		err++;
+
+	tmp = cmd->scan_begin_src;
+	cmd->scan_begin_src &= TRIG_TIMER;
+	if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
+		err++;
+
+	tmp = cmd->convert_src;
+	cmd->convert_src &= TRIG_NOW;
+	if (!cmd->convert_src || tmp != cmd->convert_src)
+		err++;
+
+	tmp = cmd->scan_end_src;
+	cmd->scan_end_src &= TRIG_COUNT;
+	if (!cmd->scan_end_src || tmp != cmd->scan_end_src)
+		err++;
+
+	tmp = cmd->stop_src;
+	cmd->stop_src &= TRIG_COUNT | TRIG_NONE;
+	if (!cmd->stop_src || tmp != cmd->stop_src)
+		err++;
+
+	if (err)
+		return 1;
+
+	/* step 2: make sure trigger sources are unique and mutually compatible */
+
+	/* note that mutual compatiblity is not an issue here */
+	if (cmd->stop_src != TRIG_TIMER && cmd->stop_src != TRIG_EXT)
+		err++;
+
+	if (err)
+		return 2;
+
+	/* step 3: make sure arguments are trivially compatible */
+
+	if (cmd->start_arg != 0) {
+		cmd->start_arg = 0;
+		err++;
+	}
+	if (cmd->scan_begin_arg > 1000000000) {
+		cmd->scan_begin_arg = 1000000000;
+		err++;
+	}
+	if (cmd->scan_begin_arg < DT2814_MAX_SPEED) {
+		cmd->scan_begin_arg = DT2814_MAX_SPEED;
+		err++;
+	}
+	if (cmd->scan_end_arg != cmd->chanlist_len) {
+		cmd->scan_end_arg = cmd->chanlist_len;
+		err++;
+	}
+	if (cmd->stop_src == TRIG_COUNT) {
+		if (cmd->stop_arg < 2) {
+			cmd->stop_arg = 2;
+			err++;
+		}
+	} else {
+		/* TRIG_NONE */
+		if (cmd->stop_arg != 0) {
+			cmd->stop_arg = 0;
+			err++;
+		}
+	}
+
+	if (err)
+		return 3;
+
+	/* step 4: fix up any arguments */
+
+	tmp = cmd->scan_begin_arg;
+	dt2814_ns_to_timer(&cmd->scan_begin_arg, cmd->flags & TRIG_ROUND_MASK);
+	if (tmp != cmd->scan_begin_arg)
+		err++;
+
+	if (err)
+		return 4;
+
+	return 0;
+}
+
+static int dt2814_ai_cmd(comedi_device * dev, comedi_subdevice * s)
+{
+	comedi_cmd *cmd = &s->async->cmd;
+	int chan;
+	int trigvar;
+
+	trigvar =
+		dt2814_ns_to_timer(&cmd->scan_begin_arg,
+		cmd->flags & TRIG_ROUND_MASK);
+
+	chan = CR_CHAN(cmd->chanlist[0]);
+
+	devpriv->ntrig = cmd->stop_arg;
+	outb(chan | DT2814_ENB | (trigvar << 5), dev->iobase + DT2814_CSR);
+
+	return 0;
+
+}
+
+static int dt2814_attach(comedi_device * dev, comedi_devconfig * it)
+{
+	int i, irq;
+	int ret;
+	comedi_subdevice *s;
+	unsigned long iobase;
+
+	iobase = it->options[0];
+	printk("comedi%d: dt2814: 0x%04lx ", dev->minor, iobase);
+	if (!request_region(iobase, DT2814_SIZE, "dt2814")) {
+		printk("I/O port conflict\n");
+		return -EIO;
+	}
+	dev->iobase = iobase;
+	dev->board_name = "dt2814";
+
+	outb(0, dev->iobase + DT2814_CSR);
+	comedi_udelay(100);
+	if (inb(dev->iobase + DT2814_CSR) & DT2814_ERR) {
+		printk("reset error (fatal)\n");
+		return -EIO;
+	}
+	i = inb(dev->iobase + DT2814_DATA);
+	i = inb(dev->iobase + DT2814_DATA);
+
+	irq = it->options[1];
+#if 0
+	if (irq < 0) {
+		save_flags(flags);
+		sti();
+		irqs = probe_irq_on();
+
+		outb(0, dev->iobase + DT2814_CSR);
+
+		comedi_udelay(100);
+
+		irq = probe_irq_off(irqs);
+		restore_flags(flags);
+		if (inb(dev->iobase + DT2814_CSR) & DT2814_ERR) {
+			printk("error probing irq (bad) \n");
+		}
+
+		i = inb(dev->iobase + DT2814_DATA);
+		i = inb(dev->iobase + DT2814_DATA);
+	}
+#endif
+	dev->irq = 0;
+	if (irq > 0) {
+		if (comedi_request_irq(irq, dt2814_interrupt, 0, "dt2814", dev)) {
+			printk("(irq %d unavailable)\n", irq);
+		} else {
+			printk("( irq = %d )\n", irq);
+			dev->irq = irq;
+		}
+	} else if (irq == 0) {
+		printk("(no irq)\n");
+	} else {
+#if 0
+		printk("(probe returned multiple irqs--bad)\n");
+#else
+		printk("(irq probe not implemented)\n");
+#endif
+	}
+
+	if ((ret = alloc_subdevices(dev, 1)) < 0)
+		return ret;
+	if ((ret = alloc_private(dev, sizeof(dt2814_private))) < 0)
+		return ret;
+
+	s = dev->subdevices + 0;
+	dev->read_subdev = s;
+	s->type = COMEDI_SUBD_AI;
+	s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_CMD_READ;
+	s->n_chan = 16;		/* XXX */
+	s->len_chanlist = 1;
+	s->insn_read = dt2814_ai_insn_read;
+	s->do_cmd = dt2814_ai_cmd;
+	s->do_cmdtest = dt2814_ai_cmdtest;
+	s->maxdata = 0xfff;
+	s->range_table = &range_unknown;	/* XXX */
+
+	return 0;
+}
+
+static int dt2814_detach(comedi_device * dev)
+{
+	printk("comedi%d: dt2814: remove\n", dev->minor);
+
+	if (dev->irq) {
+		comedi_free_irq(dev->irq, dev);
+	}
+	if (dev->iobase) {
+		release_region(dev->iobase, DT2814_SIZE);
+	}
+
+	return 0;
+}
+
+static irqreturn_t dt2814_interrupt(int irq, void *d PT_REGS_ARG)
+{
+	int lo, hi;
+	comedi_device *dev = d;
+	comedi_subdevice *s;
+	int data;
+
+	if (!dev->attached) {
+		comedi_error(dev, "spurious interrupt");
+		return IRQ_HANDLED;
+	}
+
+	s = dev->subdevices + 0;
+
+	hi = inb(dev->iobase + DT2814_DATA);
+	lo = inb(dev->iobase + DT2814_DATA);
+
+	data = (hi << 4) | (lo >> 4);
+
+	if (!(--devpriv->ntrig)) {
+		int i;
+
+		outb(0, dev->iobase + DT2814_CSR);
+		/* note: turning off timed mode triggers another
+		   sample. */
+
+		for (i = 0; i < DT2814_TIMEOUT; i++) {
+			if (inb(dev->iobase + DT2814_CSR) & DT2814_FINISH)
+				break;
+		}
+		inb(dev->iobase + DT2814_DATA);
+		inb(dev->iobase + DT2814_DATA);
+
+		s->async->events |= COMEDI_CB_EOA;
+	}
+	comedi_event(dev, s);
+	return IRQ_HANDLED;
+}