msm: Support DEBUG_LL on MSM8660 and MSM8960

Add support for DEBUG_LL on the 8660 and 8960 development boards.
While we're here cleanup the uncompress.h code a bit. Avoid
the use of readl/writel as those are Linux specific APIs that
aren't guaranteed to work in the decompressor.

Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: David Brown <davidb@codeaurora.org>

arch/arm/Kconfig.debug

@@ -268,6 +268,22 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the third serial port on MSM devices.
 
+	config DEBUG_MSM8660_UART
+		bool "Kernel low-level debugging messages via MSM 8660 UART"
+		depends on ARCH_MSM8X60
+		select MSM_HAS_DEBUG_UART_HS
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on MSM 8660 devices.
+
+	config DEBUG_MSM8960_UART
+		bool "Kernel low-level debugging messages via MSM 8960 UART"
+		depends on ARCH_MSM8960
+		select MSM_HAS_DEBUG_UART_HS
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on MSM 8960 devices.
+
 endchoice
 
 config EARLY_PRINTK

arch/arm/mach-msm/Kconfig

@@ -60,6 +60,9 @@ config ARCH_MSM8960
 
 endchoice
 
+config MSM_HAS_DEBUG_UART_HS
+	bool
+
 config MSM_SOC_REV_A
 	bool
 config  ARCH_MSM_SCORPIONMP

arch/arm/mach-msm/include/mach/debug-macro.S

@@ -1,6 +1,7 @@
 /*
  *
  * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
  * Author: Brian Swetland <swetland@google.com>
  *
  * This software is licensed under the terms of the GNU General Public
@@ -24,17 +25,42 @@
 #endif
 	.endm
 
-	.macro	senduart,rd,rx
+	.macro	senduart, rd, rx
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+	@ Write the 1 character to UARTDM_TF
+	str	\rd, [\rx, #0x70]
+#else
 	teq	\rx, #0
 	strne	\rd, [\rx, #0x0C]
+#endif
 	.endm
 
-	.macro	waituart,rd,rx
+	.macro	waituart, rd, rx
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+	@ check for TX_EMT in UARTDM_SR
+	ldr	\rd, [\rx, #0x08]
+	tst	\rd, #0x08
+	bne	1002f
+	@ wait for TXREADY in UARTDM_ISR
+1001:	ldr	\rd, [\rx, #0x14]
+	tst	\rd, #0x80
+	beq 	1001b
+1002:
+	@ Clear TX_READY by writing to the UARTDM_CR register
+	mov	\rd, #0x300
+	str	\rd, [\rx, #0x10]
+	@ Write 0x1 to NCF register
+	mov 	\rd, #0x1
+	str	\rd, [\rx, #0x40]
+	@ UARTDM reg. Read to induce delay
+	ldr	\rd, [\rx, #0x08]
+#else
 	@ wait for TX_READY
 1001:	ldr	\rd, [\rx, #0x08]
 	tst	\rd, #0x04
 	beq	1001b
+#endif
 	.endm
 
-	.macro	busyuart,rd,rx
+	.macro	busyuart, rd, rx
 	.endm

arch/arm/mach-msm/include/mach/msm_iomap-8960.h

@@ -45,4 +45,9 @@
 #define MSM8960_TMR0_PHYS	0x0208A000
 #define MSM8960_TMR0_SIZE	SZ_4K
 
+#ifdef CONFIG_DEBUG_MSM8960_UART
+#define MSM_DEBUG_UART_BASE	0xE1040000
+#define MSM_DEBUG_UART_PHYS	0x16440000
+#endif
+
 #endif

arch/arm/mach-msm/include/mach/msm_iomap-8x60.h

@@ -62,4 +62,9 @@
 #define MSM8X60_TMR0_PHYS	0x02040000
 #define MSM8X60_TMR0_SIZE	SZ_4K
 
+#ifdef CONFIG_DEBUG_MSM8660_UART
+#define MSM_DEBUG_UART_BASE	0xE1040000
+#define MSM_DEBUG_UART_PHYS	0x19C40000
+#endif
+
 #endif

arch/arm/mach-msm/include/mach/uncompress.h

@@ -1,6 +1,6 @@
-/* arch/arm/mach-msm/include/mach/uncompress.h
- *
+/*
  * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -14,17 +14,40 @@
  */
 
 #ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
+#define __ASM_ARCH_MSM_UNCOMPRESS_H
+
+#include <asm/processor.h>
+#include <mach/msm_iomap.h>
+
+#define UART_CSR      (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08))
+#define UART_TF       (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x0c))
 
-#include "hardware.h"
-#include "linux/io.h"
-#include "mach/msm_iomap.h"
+#define UART_DM_SR    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08)))
+#define UART_DM_CR    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x10)))
+#define UART_DM_ISR   (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x14)))
+#define UART_DM_NCHAR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x40)))
+#define UART_DM_TF    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x70)))
 
 static void putc(int c)
 {
 #if defined(MSM_DEBUG_UART_PHYS)
-	unsigned base = MSM_DEBUG_UART_PHYS;
-	while (!(readl(base + 0x08) & 0x04)) ;
-	writel(c, base + 0x0c);
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+	/*
+	 * Wait for TX_READY to be set; but skip it if we have a
+	 * TX underrun.
+	 */
+	if (UART_DM_SR & 0x08)
+		while (!(UART_DM_ISR & 0x80))
+			cpu_relax();
+
+	UART_DM_CR = 0x300;
+	UART_DM_NCHAR = 0x1;
+	UART_DM_TF = c;
+#else
+	while (!(UART_CSR & 0x04))
+		cpu_relax();
+	UART_TF = c;
+#endif
 #endif
 }
 

arch/arm/mach-msm/io.c

@@ -111,6 +111,9 @@ static struct map_desc msm8x60_io_desc[] __initdata = {
 	MSM_CHIP_DEVICE(TMR0, MSM8X60),
 	MSM_DEVICE(ACC),
 	MSM_DEVICE(GCC),
+#ifdef CONFIG_DEBUG_MSM8660_UART
+	MSM_DEVICE(DEBUG_UART),
+#endif
 };
 
 void __init msm_map_msm8x60_io(void)
@@ -125,6 +128,9 @@ static struct map_desc msm8960_io_desc[] __initdata = {
 	MSM_CHIP_DEVICE(QGIC_CPU, MSM8960),
 	MSM_CHIP_DEVICE(TMR, MSM8960),
 	MSM_CHIP_DEVICE(TMR0, MSM8960),
+#ifdef CONFIG_DEBUG_MSM8960_UART
+	MSM_DEVICE(DEBUG_UART),
+#endif
 };
 
 void __init msm_map_msm8960_io(void)