---

yaml
---
r: 291631
b: refs/heads/master
c: c2ef8f2
h: refs/heads/master
i:
  291629: 4e1ba09
  291627: 12abf92
  291623: f96975d
  291615: e96031c
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 765031668fb2b064aebd9a568e5ad794cbe3413a
+refs/heads/master: c2ef8f21ea8f7c34dfa0b569fdee431348205955

trunk/CREDITS

@@ -514,6 +514,11 @@ S: Bessemerstraat 21
 S: Amsterdam
 S: The Netherlands
 
+N: NeilBrown
+E: neil@brown.name
+P: 4096R/566281B9 1BC6 29EB D390 D870 7B5F  497A 39EC 9EDD 5662 81B9
+D: NFSD Maintainer 2000-2007
+
 N: Zach Brown
 E: zab@zabbo.net
 D: maestro pci sound

trunk/Documentation/ABI/testing/sysfs-bus-pci

@@ -66,6 +66,24 @@ Description:
 		re-discover previously removed devices.
 		Depends on CONFIG_HOTPLUG.
 
+What:		/sys/bus/pci/devices/.../msi_irqs/
+Date:		September, 2011
+Contact:	Neil Horman <nhorman@tuxdriver.com>
+Description:
+		The /sys/devices/.../msi_irqs directory contains a variable set
+		of sub-directories, with each sub-directory being named after a
+		corresponding msi irq vector allocated to that device.  Each
+		numbered sub-directory N contains attributes of that irq.
+		Note that this directory is not created for device drivers which
+		do not support msi irqs
+
+What:		/sys/bus/pci/devices/.../msi_irqs/<N>/mode
+Date:		September 2011
+Contact:	Neil Horman <nhorman@tuxdriver.com>
+Description:
+		This attribute indicates the mode that the irq vector named by
+		the parent directory is in (msi vs. msix)
+
 What:		/sys/bus/pci/devices/.../remove
 Date:		January 2009
 Contact:	Linux PCI developers <linux-pci@vger.kernel.org>

trunk/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration

@@ -0,0 +1,12 @@
+What:           Attribute for calibrating ST-Ericsson AB8500 Real Time Clock
+Date:           Oct 2011
+KernelVersion:  3.0
+Contact:        Mark Godfrey <mark.godfrey@stericsson.com>
+Description:    The rtc_calibration attribute allows the userspace to
+                calibrate the AB8500.s 32KHz Real Time Clock.
+                Every 60 seconds the AB8500 will correct the RTC's value
+                by adding to it the value of this attribute.
+                The range of the attribute is -127 to +127 in units of
+                30.5 micro-seconds (half-parts-per-million of the 32KHz clock)
+Users:          The /vendor/st-ericsson/base_utilities/core/rtc_calibration
+                daemon uses this interface.

trunk/Documentation/ABI/testing/sysfs-devices-platform-docg3

@@ -0,0 +1,34 @@
+What:		/sys/devices/platform/docg3/f[0-3]_dps[01]_is_keylocked
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	Robert Jarzmik <robert.jarzmik@free.fr>
+Description:
+		Show whether the floor (0 to 4), protection area (0 or 1) is
+		keylocked. Each docg3 chip (or floor) has 2 protection areas,
+		which can cover any part of it, block aligned, called DPS.
+		The protection has information embedded whether it blocks reads,
+		writes or both.
+		The result is:
+		0 -> the DPS is not keylocked
+		1 -> the DPS is keylocked
+Users:		None identified so far.
+
+What:		/sys/devices/platform/docg3/f[0-3]_dps[01]_protection_key
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	Robert Jarzmik <robert.jarzmik@free.fr>
+Description:
+		Enter the protection key for the floor (0 to 4), protection area
+		(0 or 1). Each docg3 chip (or floor) has 2 protection areas,
+		which can cover any part of it, block aligned, called DPS.
+		The protection has information embedded whether it blocks reads,
+		writes or both.
+		The protection key is a string of 8 bytes (value 0-255).
+		Entering the correct value toggle the lock, and can be observed
+		through f[0-3]_dps[01]_is_keylocked.
+		Possible values are:
+			- 8 bytes
+		Typical values are:
+			- "00000000"
+			- "12345678"
+Users:		None identified so far.

trunk/Documentation/ABI/testing/sysfs-driver-wacom

@@ -15,9 +15,9 @@ Contact:	linux-input@vger.kernel.org
 Description:
 		Attribute group for control of the status LEDs and the OLEDs.
 		This attribute group is only available for Intuos 4 M, L,
-		and XL (with LEDs and OLEDs) and Cintiq 21UX2 (LEDs only).
-		Therefore its presence implicitly signifies the presence of
-		said LEDs and OLEDs on the tablet device.
+		and XL (with LEDs and OLEDs) and Cintiq 21UX2 and Cintiq 24HD
+		(LEDs only). Therefore its presence implicitly signifies the
+		presence of said LEDs and OLEDs on the tablet device.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance
 Date:		August 2011
@@ -41,16 +41,17 @@ Date:		August 2011
 Contact:	linux-input@vger.kernel.org
 Description:
 		Writing to this file sets which one of the four (for Intuos 4)
-		or of the right four (for Cintiq 21UX2) status LEDs is active (0..3).
-		The other three LEDs on the same side are always inactive.
+		or of the right four (for Cintiq 21UX2 and Cintiq 24HD) status
+		LEDs is active (0..3). The other three LEDs on the same side are
+		always inactive.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select
 Date:		September 2011
 Contact:	linux-input@vger.kernel.org
 Description:
-		Writing to this file sets which one of the left four (for Cintiq 21UX2)
-		status LEDs is active (0..3). The other three LEDs on the left are always
-		inactive.
+		Writing to this file sets which one of the left four (for Cintiq 21UX2
+		and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on
+		the left are always inactive.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance
 Date:		August 2011

trunk/Documentation/ABI/testing/sysfs-kernel-slab

@@ -346,6 +346,10 @@ Description:
 		number of objects per slab.  If a slab cannot be allocated
 		because of fragmentation, SLUB will retry with the minimum order
 		possible depending on its characteristics.
+		When debug_guardpage_minorder=N (N > 0) parameter is specified
+		(see Documentation/kernel-parameters.txt), the minimum possible
+		order is used and this sysfs entry can not be used to change
+		the order at run time.
 
 What:		/sys/kernel/slab/cache/order_fallback
 Date:		April 2008

trunk/Documentation/ABI/testing/sysfs-module

@@ -33,3 +33,19 @@ Description:	Maximum time allowed for periodic transfers per microframe (μs)
 		Beware, non-standard modes are usually not thoroughly tested by
 		hardware designers, and the hardware can malfunction when this
 		setting differ from default 100.
+
+What:		/sys/module/*/{coresize,initsize}
+Date:		Jan 2012
+KernelVersion:»·3.3
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:	Module size in bytes.
+
+What:		/sys/module/*/taint
+Date:		Jan 2012
+KernelVersion:»·3.3
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:	Module taint flags:
+			P - proprietary module
+			O - out-of-tree module
+			F - force-loaded module
+			C - staging driver module

trunk/Documentation/DocBook/device-drivers.tmpl

@@ -50,7 +50,9 @@
 
      <sect1><title>Delaying, scheduling, and timer routines</title>
 !Iinclude/linux/sched.h
-!Ekernel/sched.c
+!Ekernel/sched/core.c
+!Ikernel/sched/cpupri.c
+!Ikernel/sched/fair.c
 !Iinclude/linux/completion.h
 !Ekernel/timer.c
      </sect1>
@@ -100,9 +102,12 @@ X!Iinclude/linux/kobject.h
 !Iinclude/linux/device.h
      </sect1>
      <sect1><title>Device Drivers Base</title>
+!Idrivers/base/init.c
 !Edrivers/base/driver.c
 !Edrivers/base/core.c
+!Edrivers/base/syscore.c
 !Edrivers/base/class.c
+!Idrivers/base/node.c
 !Edrivers/base/firmware_class.c
 !Edrivers/base/transport_class.c
 <!-- Cannot be included, because
@@ -111,13 +116,18 @@ X!Iinclude/linux/kobject.h
      exceed allowed 44 characters maximum
 X!Edrivers/base/attribute_container.c
 -->
-!Edrivers/base/sys.c
+!Edrivers/base/dd.c
 <!--
 X!Edrivers/base/interface.c
 -->
 !Iinclude/linux/platform_device.h
 !Edrivers/base/platform.c
 !Edrivers/base/bus.c
+     </sect1>
+     <sect1><title>Device Drivers DMA Management</title>
+!Edrivers/base/dma-buf.c
+!Edrivers/base/dma-coherent.c
+!Edrivers/base/dma-mapping.c
      </sect1>
      <sect1><title>Device Drivers Power Management</title>
 !Edrivers/base/power/main.c
@@ -216,9 +226,8 @@ X!Isound/sound_firmware.c
 
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
-!Iinclude/linux/serial_core.h
 !Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250.c
+!Edrivers/tty/serial/8250/8250.c
   </chapter>
 
   <chapter id="fbdev">

trunk/Documentation/DocBook/deviceiobook.tmpl

@@ -317,7 +317,7 @@ CPU B:  spin_unlock_irqrestore(&dev_lock, flags)
   <chapter id="pubfunctions">
      <title>Public Functions Provided</title>
 !Iarch/x86/include/asm/io.h
-!Elib/iomap.c
+!Elib/pci_iomap.c
   </chapter>
 
 </book>

trunk/Documentation/DocBook/media/constraints.png.b64

@@ -0,0 +1,59 @@
+iVBORw0KGgoAAAANSUhEUgAAAlQAAAFYCAYAAACVsmLPAAAAAXNSR0IArs4c6QAAAAZiS0dEAP8A
+/wD/oL2nkwAAAAlwSFlzAAAOxAAADsQBlSsOGwAAAAd0SU1FB9sLCBIAKVtZsMAAAAxxSURBVHja
+7d3ZbqvIAkDRLsv//8v0QytXvpYZap7Wko56OAnE2AXbBSbhOI7jHwAAkr1sAgAAQQUAIKgAAAQV
+AICgAgBAUAEACCoAAEEFACCoAAAQVAAAzb2jvyMEWw0AmFvh37xnhgoAQFABAPT1zvruwtNlAADV
+VLxsyQwVAICgAgAQVAAAggoAQFABACCoYEohuFkugKACsmLq178DIKiAyJgSVQCCCigQU6IKQFAB
+BWJKVAEIKqBgKIkqAEEFFAgkUQUgqIACYSSqAAQViKkwxjIAEFSwbUyJKgBBBWJq8GUCIKhgm5gS
+VQCCCsSUqAIQVMBYoSOqAAQVLOk41lwXAIIKhoqqJyFUYhkACCpYMqpiQqjEMgAQVLBUVKWEUIll
+ACCoYImoygmhEssAQFDBElHVexkACCoAAEEFACCoAAAQVAAAggoAQFABAAgqAAAEFQCAoAIAEFQA
+AIIKAABBBQAgqAAABBUAgKACAOA/b5sAGjsO2wBgMWaoAAAEFQCAoAIAEFQAADtzUXohIQQbAYDi
+Dh9kmYIZKgAAQQUAIKgAAAQVAICgAgAgmU/5VeSTGQDE8InxeZmhAgAQVAAAggoAQFABAAgqAAAE
+FQCAoAIAEFQAAHtyY0/o4O7efe4JCzAXM1QAAIIKAEBQAQAIKgAAQQUAgKACABBUAACCCgBAUAEA
+IKgAAAQVAICgAgAQVAAACCoAAEEFACCoAAAEFVBICGMsAwBBBVPHVE4QlVgGAIIKpo6ps/9utQwA
+BBUsEVMpQVRiGQAIKlgqpmKCqMQyABBUsGRMzbouAAQVNHMca64LAEEFy0WVmAIQVCCqxBSAoAL6
+hI+YAhBUIKrEFICgAvqEkJgCEFQgqo4+3wuAoILto0pMAQgqICOQxBSAoAIyQklMAQgqICOYxBSA
+oAIyokpMAQgqICOqxBTAvN42AYwTVQDMyQwVAICgAgAQVAAAggoAQFABAJDMp/y4FIJtwJx8ehJo
+yQwVAICgAgDoyyk/HnMKhdE5RQ30YoYKAEBQAQAIKgAAQQUAIKgAABBUAACCCgBAUAEACCoAAAQV
+AICgAgAQVAAAggoAAEEFACCoAAAEFQCAoAIAQFABAAgqAABBBQAgqAAAEFQAAIIKAEBQAQAIKgAA
+BBUAgKACABBUAACCCgAAQQUAIKgAAAQVAICgAgBAUAEACCoAAEEFACCoAAAQVAAAggoAQFABAAgq
+AACGCKoQPAs2JQAIquwCUAI2JQAIqowCOPtvbEoAEFQRBaAEbEoAEFQFCkAJ2JQAIKgKFIASsClh
+szEKrDGoXkNuiOPwwim4iezYoc9+39iDfQbVq+mGEFOiCjZ7E23swR6D6tV8Q4gpUQWb7PeNPdhn
+UL26bAgxJapgk/2+sQd7DKr3EDE1y96mUPT1fqgh6Ffosbsz9mDdQfXquiEY/rUKlBtLYgoqDJZB
+Dmjlg8qRWlSBMSSmYLOoKhtUjtCiCowdMQUbRtXLswUgpkBU5XkXf9CmPJZ9nQJrft6Gife9XmC/
+t0mHg9tr3FcJYgrmjilgn8Fa55SfI7WYAvtnYKNBW+8+VLGn/zY6wtd4qDY1iCngx+BtdNCre1G6
+W3gPt7MXUwAwW1CJKjEFCzB2wODtH1SiSkyB/TKw+KB9DfnARJWYAvtnYKLB+m7+AJ+UgL2WTQmT
+jz1jEJVf0ASD7jXck2/vY1PCQscwE+6wfkz1CaqrB6wAbEoQVcBkMdUvqH49cAVgU4KoAiaMqb5B
+9bkBFIBNCaIKmDSm+geVArApYaOxZ4zCuoPq5VkDqL//F1Ow9qASVACV9/9iCtYfVIIKoOL+X0zB
+HoNKUAFU2v+LKdhnUAkqgAZvqoG1B5WgAgAQVAAAggoAQFABAAgqAAAEFQCAoAIAEFQAAIIKAABB
+BQAgqAAABBUAgKACAEBQAQAIKgAAQQUAIKgAABBUAACCCgBAUAEACCoAAAQVAICgAgAY3NsmIEYI
+//3zONK/7u/v/nx+zdPl/1rO0++LWd6vZZ59Xe7jSfnZSq3z6jnJ2ValX09PHj9AD2aoiPJ34Lo6
+wJWKiJQD7N2BN/WAzbNtZTsCuzJDRZeD8XHkH3zPZo5CSJudeTKbdrX+lkE7QkzFbq8VHj/AGTNU
+dDkY1ziw1jjY7nAA/wzKqxnIu5gSPICggoTIuDroXh1YRz3ohuCUlcgESOOUH81iZdR1fJ9+zL1Q
+use1Y6nrvLsearR46rHNAQQVw6l14HtyOurJz5USVqs9LynXt8V+ShBAUMHHQfdzFuMsQGqHSW5M
+PQmrVtdsjRCkOwY5gKBiGne3Okg5WJaMqbuw2uX5+P6aX4H8/f922F4AgorlgyD3hp47z3ycPfZf
+p/FSb00BIKjg4kD8/cm4mFNjKfd/OpsJyb2GJ+V+UzEXSK9wAfuvqGr9s7ooHRiV2yYgDCe8xUOp
+gHny2GNjVdwAOzJDRbUYSfnep8srfdCOWV6tr225ztzt3PpxiTRgdGaoAAAEFQBAX075sbS7C6dH
+OJU0w8/ocQEIKjY2w0F71bAQTMBOnPIDABBUAAB9OeXHY36tCAD8ZoYKAEBQAQD05ZQfl3xSCwDu
+maECABBUAACCCgBAUAEACCqgiRDczwtAUAFZMfXr3wEQVEBkTIkqAEEFFIgpUQUgqIACMSWqAAQV
+UDCURBWAoAIKBJKoAhBUQIEwElUAggrEVBhjGQAIKtg2pkQVgKACMTX4MgEQVLBNTIkqAEEFYkpU
+AQgqYKzQEVUAggqWdBxrrgsAQQVDRdWTECqxDAAEFSwZVTEhVGIZAAgqWCqqUkKoxDIAEFSwRFTl
+hFCJZQAgqGCJqOq9DAAEFQCAoAIAEFQAAAgqAABBBQAwibdNAECqcPKLJo8fH1cNN7+U8up7jpOP
+v6as//PvPr+/xPpTlsEazFABUDSmnsRTie/pvX74ZIYKgKz4+J55+fu7EMLPWZmU2auY9YsjejBD
+BUDRmDk7pdZq/Vf/P2bZT7/2OI7/rU/ICSoAiHIVLS2uFyq5Dtc3kcspPwCairmQvHUghhBOT1U+
+eQx/fyfQBBUALBNrtcPmc/l/QYagAoDqYi9ib/2zPZ2l+hVw7Ms1VAAkKXXbgpIXkH9eIF7r8T15
+bEJLUAHA4wD6FQ5PPoVXc/0ll3/3db/+sCen/ABIio7PU3U5YfIdY0++78n6RzPqxfiUYYYKqh94
+rv/AzFGV8nelouLue3JC5e5XzTx57E777SUcsa+4zxeIo8HlOw/vOgBwLBlqA1drGDNUAACCCgBA
+UAEATM2n/CpyQSIA7MEMFQCAoAIAEFQAAIIKAGBnLkovxI3XAGBfZqgAAAQVAEBfTvlBbXf3I3O6
+GGB6ZqgAAAQVAICgAgAQVAAAggoAAEEFACCoAAAEFQCAoAIAQFABAAgqAABBBQAgqAAAEFQAAIIK
+AEBQAQAIKiBFCGMsAwBBBVPHVE4QlVgGAM29bQIoGFOf/30c7ZcBrV/zd6/Rq6/7fs1/fs3T5Z+9
+AckZO2dvaL6XeffGJ/XxpPxspdZ59ZzkbKve278BM1RQOqaeDvbSy4CW/g5WV6/RUhHRcuwYc2W2
+VY3tP/hzY4YKar5bfLIDeLIMM1WsOnaOI/9AeTZzETt2YmbTrtbfMmhH2PfFbq/Syxxk/2iGCmrF
+1Kzrgplez78OpjUOsDu8qfkMyqsZyLvwSdleNZYpqGASLQe3GSpGHgNXB92r1+6or+sQvInptV+a
+eF/nlB/kDv7aO14xxUpahErqOr7Hc+yF9y3Hbul13l27NPJ+aJBTgYIKRo4qMcXK46b2wTVlHb9m
+3VpcXD/i85Kyb4v9lGCvZQoq2CiqxBQzvfY/ZzHOAqR2mOTG1JOwanXN1ghBunucR3INFYw4qMUU
+K/sLsO9rlXKuXSoZU99jcfXxmPpp5LP7f5W+B9Ukz4GggtGiSkxBn5ja/UL0v3D5/nO1jyq1zWos
+szGn/KDGTinnoliY9TV/FzZnr++U+z+dfcIw93qblPtNxVwUvcIF7N/7uZJRlbLMQS5KN0MFtQ4w
+YgrWGberjs+Y21vExmqN/eDAz0M4jsifrtZ5alh5ZyWmAMbaJxfe75qhgl7veMUUwDIEFfSMKjEF
+sAQXpUOrqJrk5nSwpLvT7yOMxxl+Ro9LUMFQUSWmoP348zN6XIIK7FgAWDWo/DZuAAAXpQMACCoA
+gM7iT/m5BgQA4P+YoQIAEFQAAIIKAEBQAQAIKgAABBUAgKACABBUAAB7+hfHbDX87cMFJQAAAABJ
+RU5ErkJggg==

trunk/Documentation/DocBook/media/dvb/dvbproperty.xml

@@ -163,14 +163,16 @@ get/set up to 64 properties. The actual meaning of each property is described on
 	<section id="DTV-FREQUENCY">
 		<title><constant>DTV_FREQUENCY</constant></title>
 
-		<para>Central frequency of the channel, in HZ.</para>
+		<para>Central frequency of the channel.</para>
 
 		<para>Notes:</para>
-		<para>1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
+		<para>1)For satellital delivery systems, it is measured in kHz.
+			For the other ones, it is measured in Hz.</para>
+		<para>2)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
 			E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
 			the channel which is 6MHz.</para>
 
-		<para>2)As in ISDB-Tsb the channel consists of only one or three segments the
+		<para>3)As in ISDB-Tsb the channel consists of only one or three segments the
 			frequency step is 429kHz, 3*429 respectively. As for ISDB-T the
 			central frequency of the channel is expected.</para>
 	</section>
@@ -334,9 +336,10 @@ typedef enum fe_rolloff {
 		<title>fe_delivery_system type</title>
 		<para>Possible values: </para>
 <programlisting>
+
 typedef enum fe_delivery_system {
 	SYS_UNDEFINED,
-	SYS_DVBC_ANNEX_AC,
+	SYS_DVBC_ANNEX_A,
 	SYS_DVBC_ANNEX_B,
 	SYS_DVBT,
 	SYS_DSS,
@@ -353,6 +356,7 @@ typedef enum fe_delivery_system {
 	SYS_DAB,
 	SYS_DVBT2,
 	SYS_TURBO,
+	SYS_DVBC_ANNEX_C,
 } fe_delivery_system_t;
 </programlisting>
 		</section>
@@ -647,6 +651,18 @@ typedef enum fe_hierarchy {
 			many data types via a single multiplex. The API will soon support this
 			at which point this section will be expanded.</para>
 	</section>
+	<section id="DTV_ENUM_DELSYS">
+		<title><constant>DTV_ENUM_DELSYS</constant></title>
+		<para>A Multi standard frontend needs to advertise the delivery systems provided.
+			Applications need to enumerate the provided delivery systems, before using
+			any other operation with the frontend. Prior to it's introduction,
+			FE_GET_INFO was used to determine a frontend type. A frontend which
+			provides more than a single delivery system, FE_GET_INFO doesn't help much.
+			Applications which intends to use a multistandard frontend must enumerate
+			the delivery systems associated with it, rather than trying to use
+			FE_GET_INFO. In the case of a legacy frontend, the result is just the same
+			as with FE_GET_INFO, but in a more structured format </para>
+	</section>
 </section>
 	<section id="frontend-property-terrestrial-systems">
 	<title>Properties used on terrestrial delivery systems</title>
@@ -721,14 +737,10 @@ typedef enum fe_hierarchy {
 			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ISDBT-LAYER-ENABLED"><constant>DTV_ISDBT_LAYER_ENABLED</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ISDBT-PARTIAL-RECEPTION"><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ISDBT-SOUND-BROADCASTING"><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></link></para></listitem>
@@ -767,7 +779,8 @@ typedef enum fe_hierarchy {
 	<title>Properties used on cable delivery systems</title>
 	<section id="dvbc-params">
 		<title>DVB-C delivery system</title>
-		<para>The DVB-C Annex-A/C is the widely used cable standard. Transmission uses QAM modulation.</para>
+		<para>The DVB-C Annex-A is the widely used cable standard. Transmission uses QAM modulation.</para>
+		<para>The DVB-C Annex-C is optimized for 6MHz, and is used in Japan. It supports a subset of the Annex A modulation types, and a roll-off of 0.13, instead of 0.15</para>
 		<para>The following parameters are valid for DVB-C Annex A/C:</para>
 		<itemizedlist mark='opencircle'>
 			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>

trunk/Documentation/DocBook/media/dvb/frontend.xml

@@ -45,8 +45,8 @@ transmission. The fontend types are given by fe_type_t type, defined as:</para>
   </row>
   <row>
      <entry id="FE_QAM"><constant>FE_QAM</constant></entry>
-     <entry>For DVB-C annex A/C standard</entry>
-     <entry><constant>SYS_DVBC_ANNEX_AC</constant></entry>
+     <entry>For DVB-C annex A standard</entry>
+     <entry><constant>SYS_DVBC_ANNEX_A</constant></entry>
   </row>
   <row>
      <entry id="FE_OFDM"><constant>FE_OFDM</constant></entry>
@@ -63,6 +63,10 @@ transmission. The fontend types are given by fe_type_t type, defined as:</para>
 <para>Newer formats like DVB-S2, ISDB-T, ISDB-S and DVB-T2 are not described at the above, as they're
 supported via the new <link linkend="FE_GET_SET_PROPERTY">FE_GET_PROPERTY/FE_GET_SET_PROPERTY</link> ioctl's, using the <link linkend="DTV-DELIVERY-SYSTEM">DTV_DELIVERY_SYSTEM</link> parameter.
 </para>
+
+<para>The usage of this field is deprecated, as it doesn't report all supported standards, and
+will provide an incomplete information for frontends that support multiple delivery systems.
+Please use <link linkend="DTV_ENUM_DELSYS">DTV_ENUM_DELSYS</link> instead.</para>
 </section>
 
 <section id="fe-caps-t">