V4L/DVB (13178): gspca: Add support for Winbond W9967CF and W9968CF c…

…amera's

This patch adds support to gspca for the Winbond W9967CF and W9968CF
camera's. This is mostly a port of the existing v4l1 driver to gspca
(making it v4l2). But this also features fixes to the bitbanging i2c code
(send a nack not an ack after reading the last byte of a transfer), which
gets rid of the weird errors which were being seen there, and of
the smbus_refresh() hack to get around these errors.

Also the vstart settings have been tweaked to work with different
frequency filter settings.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/Kconfig

@@ -951,9 +951,13 @@ source "drivers/media/video/usbvideo/Kconfig"
 source "drivers/media/video/et61x251/Kconfig"
 
 config VIDEO_OVCAMCHIP
-	tristate "OmniVision Camera Chip support"
+	tristate "OmniVision Camera Chip support (DEPRECATED)"
 	depends on I2C && VIDEO_V4L1
 	---help---
+	  This driver is DEPRECATED please use the gspca ov519 module
+	  instead. Note that for the ov511 / ov518 support of the gspca module
+	  you need atleast version 0.6.0 of libv4l.
+
 	  Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
 	  This driver is intended to be used with the ov511 and w9968cf USB
 	  camera drivers.
@@ -962,9 +966,12 @@ config VIDEO_OVCAMCHIP
 	  module will be called ovcamchip.
 
 config USB_W9968CF
-	tristate "USB W996[87]CF JPEG Dual Mode Camera support"
+	tristate "USB W996[87]CF JPEG Dual Mode Camera support (DEPRECATED)"
 	depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
 	---help---
+	  This driver is DEPRECATED please use the gspca ov519 module
+	  instead.
+
 	  Say Y here if you want support for cameras based on OV681 or
 	  Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
 

drivers/media/video/gspca/Kconfig

@@ -76,10 +76,11 @@ config USB_GSPCA_MR97310A
 	  module will be called gspca_mr97310a.
 
 config USB_GSPCA_OV519
-	tristate "OV519 USB Camera Driver"
+	tristate "OV51x / OVFX2 / W996xCF USB Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
 	help
-	  Say Y here if you want support for cameras based on the OV519 chip.
+	  Say Y here if you want support for cameras based on one of these:
+	  OV511(+), OV518(+), OV519, OVFX2, W9967CF, W9968CF
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called gspca_ov519.

drivers/media/video/gspca/gspca.c

@@ -475,10 +475,18 @@ static struct usb_host_endpoint *get_ep(struct gspca_dev *gspca_dev)
 	xfer = gspca_dev->cam.bulk ? USB_ENDPOINT_XFER_BULK
 				   : USB_ENDPOINT_XFER_ISOC;
 	i = gspca_dev->alt;			/* previous alt setting */
-	while (--i >= 0) {
-		ep = alt_xfer(&intf->altsetting[i], xfer);
-		if (ep)
-			break;
+	if (gspca_dev->cam.reverse_alts) {
+		while (++i < gspca_dev->nbalt) {
+			ep = alt_xfer(&intf->altsetting[i], xfer);
+			if (ep)
+				break;
+		}
+	} else {
+		while (--i >= 0) {
+			ep = alt_xfer(&intf->altsetting[i], xfer);
+			if (ep)
+				break;
+		}
 	}
 	if (ep == NULL) {
 		err("no transfer endpoint found");
@@ -599,7 +607,11 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
 
 	/* set the higher alternate setting and
 	 * loop until urb submit succeeds */
-	gspca_dev->alt = gspca_dev->nbalt;
+	if (gspca_dev->cam.reverse_alts)
+		gspca_dev->alt = 0;
+	else
+		gspca_dev->alt = gspca_dev->nbalt;
+
 	if (gspca_dev->sd_desc->isoc_init) {
 		ret = gspca_dev->sd_desc->isoc_init(gspca_dev);
 		if (ret < 0)

drivers/media/video/gspca/gspca.h

@@ -58,6 +58,7 @@ struct cam {
 	u8 npkt;		/* number of packets in an ISOC message
 				 * 0 is the default value: 32 packets */
 	u32 input_flags;	/* value for ENUM_INPUT status flags */
+	char reverse_alts;	/* Alt settings are in high to low order */
 };
 
 struct gspca_dev;

drivers/media/video/gspca/ov519.c

@@ -64,6 +64,7 @@ struct sd {
 #define BRIDGE_OV518PLUS	3
 #define BRIDGE_OV519		4
 #define BRIDGE_OVFX2		5
+#define BRIDGE_W9968CF		6
 #define BRIDGE_MASK		7
 
 	char invert_led;
@@ -98,8 +99,17 @@ struct sd {
 #define SEN_OV7670 9
 #define SEN_OV76BE 10
 #define SEN_OV8610 11
+
+	u8 sensor_addr;
+	int sensor_width;
+	int sensor_height;
 };
 
+/* Note this is a bit of a hack, but the w9968cf driver needs the code for all
+   the ov sensors which is already present here. When we have the time we
+   really should move the sensor drivers to v4l2 sub drivers. */
+#include "w996Xcf.c"
+
 /* V4L2 controls supported by the driver */
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
@@ -1471,6 +1481,7 @@ static const struct ov_i2c_regvals norm_7610[] = {
 };
 
 static const struct ov_i2c_regvals norm_7620[] = {
+	{ 0x12, 0x80 },		/* reset */
 	{ 0x00, 0x00 },		/* gain */
 	{ 0x01, 0x80 },		/* blue gain */
 	{ 0x02, 0x80 },		/* red gain */
@@ -1835,22 +1846,24 @@ static unsigned char ov7670_abs_to_sm(unsigned char v)
 }
 
 /* Write a OV519 register */
-static int reg_w(struct sd *sd, __u16 index, __u8 value)
+static int reg_w(struct sd *sd, __u16 index, __u16 value)
 {
-	int ret;
-	int req;
+	int ret, req = 0;
 
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
 		req = 2;
 		break;
 	case BRIDGE_OVFX2:
+		req = 0x0a;
+		/* fall through */
+	case BRIDGE_W9968CF:
 		ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_sndctrlpipe(sd->gspca_dev.dev, 0),
-			0x0a,
+			req,
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			(__u16)value, index, NULL, 0, 500);
+			value, index, NULL, 0, 500);
 		goto leave;
 	default:
 		req = 1;
@@ -1864,12 +1877,17 @@ static int reg_w(struct sd *sd, __u16 index, __u8 value)
 			0, index,
 			sd->gspca_dev.usb_buf, 1, 500);
 leave:
-	if (ret < 0)
-		PDEBUG(D_ERR, "Write reg [%02x] %02x failed", index, value);
-	return ret;
+	if (ret < 0) {
+		PDEBUG(D_ERR, "Write reg 0x%04x -> [0x%02x] failed",
+		       value, index);
+		return ret;
+	}
+
+	PDEBUG(D_USBO, "Write reg 0x%04x -> [0x%02x]", value, index);
+	return 0;
 }
 
-/* Read from a OV519 register */
+/* Read from a OV519 register, note not valid for the w9968cf!! */
 /* returns: negative is error, pos or zero is data */
 static int reg_r(struct sd *sd, __u16 index)
 {
@@ -1894,10 +1912,12 @@ static int reg_r(struct sd *sd, __u16 index)
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0, index, sd->gspca_dev.usb_buf, 1, 500);
 
-	if (ret >= 0)
+	if (ret >= 0) {
 		ret = sd->gspca_dev.usb_buf[0];
-	else
+		PDEBUG(D_USBI, "Read reg [0x%02X] -> 0x%04X", index, ret);
+	} else
 		PDEBUG(D_ERR, "Read reg [0x%02x] failed", index);
+
 	return ret;
 }
 
@@ -1917,6 +1937,7 @@ static int reg_r8(struct sd *sd,
 		ret = sd->gspca_dev.usb_buf[0];
 	else
 		PDEBUG(D_ERR, "Read reg 8 [0x%02x] failed", index);
+
 	return ret;
 }
 
@@ -1962,9 +1983,12 @@ static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n)
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0, index,
 			sd->gspca_dev.usb_buf, n, 500);
-	if (ret < 0)
+	if (ret < 0) {
 		PDEBUG(D_ERR, "Write reg32 [%02x] %08x failed", index, value);
-	return ret;
+		return ret;
+	}
+
+	return 0;
 }
 
 static int ov511_i2c_w(struct sd *sd, __u8 reg, __u8 value)
@@ -2156,12 +2180,13 @@ static int ovfx2_i2c_w(struct sd *sd, __u8 reg, __u8 value)
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			(__u16)value, (__u16)reg, NULL, 0, 500);
 
-	if (ret >= 0)
-		PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
-	else
+	if (ret < 0) {
 		PDEBUG(D_ERR, "i2c 0x%02x -> [0x%02x] failed", value, reg);
+		return ret;
+	}
 
-	return ret;
+	PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
+	return 0;
 }
 
 static int ovfx2_i2c_r(struct sd *sd, __u8 reg)
@@ -2195,6 +2220,8 @@ static int i2c_w(struct sd *sd, __u8 reg, __u8 value)
 		return ov518_i2c_w(sd, reg, value);
 	case BRIDGE_OVFX2:
 		return ovfx2_i2c_w(sd, reg, value);
+	case BRIDGE_W9968CF:
+		return w9968cf_i2c_w(sd, reg, value);
 	}
 	return -1; /* Should never happen */
 }
@@ -2211,6 +2238,8 @@ static int i2c_r(struct sd *sd, __u8 reg)
 		return ov518_i2c_r(sd, reg);
 	case BRIDGE_OVFX2:
 		return ovfx2_i2c_r(sd, reg);
+	case BRIDGE_W9968CF:
+		return w9968cf_i2c_r(sd, reg);
 	}
 	return -1; /* Should never happen */
 }
@@ -2241,6 +2270,8 @@ static int i2c_w_mask(struct sd *sd,
  * registers while the camera is streaming */
 static inline int ov51x_stop(struct sd *sd)
 {
+	int ret;
+
 	PDEBUG(D_STREAM, "stopping");
 	sd->stopped = 1;
 	switch (sd->bridge) {
@@ -2254,6 +2285,11 @@ static inline int ov51x_stop(struct sd *sd)
 		return reg_w(sd, OV519_SYS_RESET1, 0x0f);
 	case BRIDGE_OVFX2:
 		return reg_w_mask(sd, 0x0f, 0x00, 0x02);
+	case BRIDGE_W9968CF:
+		ret  = reg_w(sd, 0x3c, 0x0a05); /* stop USB transfer */
+		ret += reg_w(sd, 0x39, 0x0000); /* disable JPEG encoder */
+		ret += reg_w(sd, 0x16, 0x0000); /* stop video capture */
+		return ret;
 	}
 
 	return 0;
@@ -2285,6 +2321,8 @@ static inline int ov51x_restart(struct sd *sd)
 		return reg_w(sd, OV519_SYS_RESET1, 0x00);
 	case BRIDGE_OVFX2:
 		return reg_w_mask(sd, 0x0f, 0x02, 0x02);
+	case BRIDGE_W9968CF:
+		return reg_w(sd, 0x3c, 0x8a05); /* USB FIFO enable */
 	}
 
 	return 0;
@@ -2338,8 +2376,13 @@ static int ov51x_set_slave_ids(struct sd *sd,
 {
 	int rc;
 
-	if (sd->bridge == BRIDGE_OVFX2)
+	switch (sd->bridge) {
+	case BRIDGE_OVFX2:
 		return reg_w(sd, OVFX2_I2C_ADDR, slave);
+	case BRIDGE_W9968CF:
+		sd->sensor_addr = slave;
+		return 0;
+	}
 
 	rc = reg_w(sd, R51x_I2C_W_SID, slave);
 	if (rc < 0)
@@ -2920,6 +2963,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		cam->bulk_nurbs = MAX_NURBS;
 		cam->bulk = 1;
 		break;
+	case BRIDGE_W9968CF:
+		ret = w9968cf_configure(sd);
+		cam->reverse_alts = 1;
+		break;
 	}
 
 	if (ret)
@@ -3005,6 +3052,16 @@ static int sd_config(struct gspca_dev *gspca_dev,
 			cam->nmodes = ARRAY_SIZE(ov519_sif_mode);
 		}
 		break;
+	case BRIDGE_W9968CF:
+		cam->cam_mode = w9968cf_vga_mode;
+		cam->nmodes = ARRAY_SIZE(w9968cf_vga_mode);
+		/* if (sd->sif)
+			cam->nmodes--; */
+
+		/* w9968cf needs initialisation once the sensor is known */
+		if (w9968cf_init(sd) < 0)
+			goto error;
+		break;
 	}
 	sd->brightness = BRIGHTNESS_DEF;
 	if (sd->sensor == SEN_OV6630 || sd->sensor == SEN_OV66308AF)
@@ -3753,9 +3810,9 @@ static int set_ov_sensor_window(struct sd *sd)
 		return ret;
 
 	i2c_w(sd, 0x17, hwsbase);
-	i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale));
+	i2c_w(sd, 0x18, hwebase + (sd->sensor_width >> hwscale));
 	i2c_w(sd, 0x19, vwsbase);
-	i2c_w(sd, 0x1a, vwebase + (sd->gspca_dev.height >> vwscale));
+	i2c_w(sd, 0x1a, vwebase + (sd->sensor_height >> vwscale));
 
 	return 0;
 }
@@ -3766,6 +3823,10 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 	int ret = 0;
 
+	/* Default for most bridges, allow bridge_mode_init_regs to override */
+	sd->sensor_width = sd->gspca_dev.width;
+	sd->sensor_height = sd->gspca_dev.height;
+
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
@@ -3779,6 +3840,9 @@ static int sd_start(struct gspca_dev *gspca_dev)
 		ret = ov519_mode_init_regs(sd);
 		break;
 	/* case BRIDGE_OVFX2: nothing to do */
+	case BRIDGE_W9968CF:
+		ret = w9968cf_mode_init_regs(sd);
+		break;
 	}
 	if (ret < 0)
 		goto out;
@@ -3980,6 +4044,9 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	case BRIDGE_OVFX2:
 		ovfx2_pkt_scan(gspca_dev, frame, data, len);
 		break;
+	case BRIDGE_W9968CF:
+		w9968cf_pkt_scan(gspca_dev, frame, data, len);
+		break;
 	}
 }
 
@@ -4275,8 +4342,12 @@ static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->freq = val;
-	if (gspca_dev->streaming)
+	if (gspca_dev->streaming) {
 		setfreq(sd);
+		/* Ugly but necessary */
+		if (sd->bridge == BRIDGE_W9968CF)
+			w9968cf_set_crop_window(sd);
+	}
 	return 0;
 }
 
@@ -4332,6 +4403,7 @@ static const struct sd_desc sd_desc = {
 
 /* -- module initialisation -- */
 static const __devinitdata struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x041e, 0x4003), .driver_info = BRIDGE_W9968CF },
 	{USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 },
@@ -4356,6 +4428,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x0813, 0x0002), .driver_info = BRIDGE_OV511PLUS },
 	{USB_DEVICE(0x0b62, 0x0059), .driver_info = BRIDGE_OVFX2 },
 	{USB_DEVICE(0x0e96, 0xc001), .driver_info = BRIDGE_OVFX2 },
+	{USB_DEVICE(0x1046, 0x9967), .driver_info = BRIDGE_W9968CF },
 	{USB_DEVICE(0x8020, 0xEF04), .driver_info = BRIDGE_OVFX2 },
 	{}
 };