---

yaml
---
r: 101358
b: refs/heads/master
c: 22a37bc
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 82f06e86117680ada35fdb76c8852268d994cd99
+refs/heads/master: 22a37bcb7857541eb2d37806c4744ee2530baa98

trunk/Documentation/ABI/testing/sysfs-block

@@ -26,3 +26,37 @@ Description:
 		I/O statistics of partition <part>. The format is the
 		same as the above-written /sys/block/<disk>/stat
 		format.
+
+
+What:		/sys/block/<disk>/integrity/format
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Metadata format for integrity capable block device.
+		E.g. T10-DIF-TYPE1-CRC.
+
+
+What:		/sys/block/<disk>/integrity/read_verify
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Indicates whether the block layer should verify the
+		integrity of read requests serviced by devices that
+		support sending integrity metadata.
+
+
+What:		/sys/block/<disk>/integrity/tag_size
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Number of bytes of integrity tag space available per
+		512 bytes of data.
+
+
+What:		/sys/block/<disk>/integrity/write_generate
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Indicates whether the block layer should automatically
+		generate checksums for write requests bound for
+		devices that support receiving integrity metadata.

trunk/Documentation/ABI/testing/sysfs-bus-css

@@ -0,0 +1,35 @@
+What:		/sys/bus/css/devices/.../type
+Date:		March 2008
+Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
+		linux-s390@vger.kernel.org
+Description:	Contains the subchannel type, as reported by the hardware.
+		This attribute is present for all subchannel types.
+
+What:		/sys/bus/css/devices/.../modalias
+Date:		March 2008
+Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
+		linux-s390@vger.kernel.org
+Description:	Contains the module alias as reported with uevents.
+		It is of the format css:t<type> and present for all
+		subchannel types.
+
+What:		/sys/bus/css/drivers/io_subchannel/.../chpids
+Date:		December 2002
+Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
+		linux-s390@vger.kernel.org
+Description:	Contains the ids of the channel paths used by this
+		subchannel, as reported by the channel subsystem
+		during subchannel recognition.
+		Note: This is an I/O-subchannel specific attribute.
+Users:		s390-tools, HAL
+
+What:		/sys/bus/css/drivers/io_subchannel/.../pimpampom
+Date:		December 2002
+Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
+		linux-s390@vger.kernel.org
+Description:	Contains the PIM/PAM/POM values, as reported by the
+		channel subsystem when last queried by the common I/O
+		layer (this implies that this attribute is not neccessarily
+		in sync with the values current in the channel subsystem).
+		Note: This is an I/O-subchannel specific attribute.
+Users:		s390-tools, HAL

trunk/Documentation/ABI/testing/sysfs-firmware-memmap

@@ -0,0 +1,71 @@
+What:		/sys/firmware/memmap/
+Date:		June 2008
+Contact:	Bernhard Walle <bwalle@suse.de>
+Description:
+		On all platforms, the firmware provides a memory map which the
+		kernel reads. The resources from that memory map are registered
+		in the kernel resource tree and exposed to userspace via
+		/proc/iomem (together with other resources).
+
+		However, on most architectures that firmware-provided memory
+		map is modified afterwards by the kernel itself, either because
+		the kernel merges that memory map with other information or
+		just because the user overwrites that memory map via command
+		line.
+
+		kexec needs the raw firmware-provided memory map to setup the
+		parameter segment of the kernel that should be booted with
+		kexec. Also, the raw memory map is useful for debugging. For
+		that reason, /sys/firmware/memmap is an interface that provides
+		the raw memory map to userspace.
+
+		The structure is as follows: Under /sys/firmware/memmap there
+		are subdirectories with the number of the entry as their name:
+
+			/sys/firmware/memmap/0
+			/sys/firmware/memmap/1
+			/sys/firmware/memmap/2
+			/sys/firmware/memmap/3
+			...
+
+		The maximum depends on the number of memory map entries provided
+		by the firmware. The order is just the order that the firmware
+		provides.
+
+		Each directory contains three files:
+
+		start	: The start address (as hexadecimal number with the
+			  '0x' prefix).
+		end	: The end address, inclusive (regardless whether the
+			  firmware provides inclusive or exclusive ranges).
+		type	: Type of the entry as string. See below for a list of
+			  valid types.
+
+		So, for example:
+
+			/sys/firmware/memmap/0/start
+			/sys/firmware/memmap/0/end
+			/sys/firmware/memmap/0/type
+			/sys/firmware/memmap/1/start
+			...
+
+		Currently following types exist:
+
+		  - System RAM
+		  - ACPI Tables
+		  - ACPI Non-volatile Storage
+		  - reserved
+
+		Following shell snippet can be used to display that memory
+		map in a human-readable format:
+
+		-------------------- 8< ----------------------------------------
+		  #!/bin/bash
+		  cd /sys/firmware/memmap
+		  for dir in * ; do
+		      start=$(cat $dir/start)
+		      end=$(cat $dir/end)
+		      type=$(cat $dir/type)
+		      printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type"
+		  done
+		-------------------- >8 ----------------------------------------

trunk/Documentation/IRQ-affinity.txt

@@ -1,17 +1,26 @@
+ChangeLog:
+	Started by Ingo Molnar <mingo@redhat.com>
+	Update by Max Krasnyansky <maxk@qualcomm.com>
 
-SMP IRQ affinity, started by Ingo Molnar <mingo@redhat.com>
-
+SMP IRQ affinity
 
 /proc/irq/IRQ#/smp_affinity specifies which target CPUs are permitted
 for a given IRQ source. It's a bitmask of allowed CPUs. It's not allowed
 to turn off all CPUs, and if an IRQ controller does not support IRQ
 affinity then the value will not change from the default 0xffffffff.
 
+/proc/irq/default_smp_affinity specifies default affinity mask that applies
+to all non-active IRQs. Once IRQ is allocated/activated its affinity bitmask
+will be set to the default mask. It can then be changed as described above.
+Default mask is 0xffffffff.
+
 Here is an example of restricting IRQ44 (eth1) to CPU0-3 then restricting
-the IRQ to CPU4-7 (this is an 8-CPU SMP box):
+it to CPU4-7 (this is an 8-CPU SMP box):
 
+[root@moon 44]# cd /proc/irq/44
 [root@moon 44]# cat smp_affinity
 ffffffff
+
 [root@moon 44]# echo 0f > smp_affinity
 [root@moon 44]# cat smp_affinity
 0000000f
@@ -21,17 +30,27 @@ PING hell (195.4.7.3): 56 data bytes
 --- hell ping statistics ---
 6029 packets transmitted, 6027 packets received, 0% packet loss
 round-trip min/avg/max = 0.1/0.1/0.4 ms
-[root@moon 44]# cat /proc/interrupts | grep 44:
- 44:          0       1785       1785       1783       1783          1
-1          0   IO-APIC-level  eth1
+[root@moon 44]# cat /proc/interrupts | grep 'CPU\|44:'
+           CPU0       CPU1       CPU2       CPU3      CPU4       CPU5        CPU6       CPU7
+ 44:       1068       1785       1785       1783         0          0           0         0    IO-APIC-level  eth1
+
+As can be seen from the line above IRQ44 was delivered only to the first four
+processors (0-3).
+Now lets restrict that IRQ to CPU(4-7).
+
 [root@moon 44]# echo f0 > smp_affinity
+[root@moon 44]# cat smp_affinity
+000000f0
 [root@moon 44]# ping -f h
 PING hell (195.4.7.3): 56 data bytes
 ..
 --- hell ping statistics ---
 2779 packets transmitted, 2777 packets received, 0% packet loss
 round-trip min/avg/max = 0.1/0.5/585.4 ms
-[root@moon 44]# cat /proc/interrupts | grep 44:
- 44:       1068       1785       1785       1784       1784       1069       1070       1069   IO-APIC-level  eth1
-[root@moon 44]#
+[root@moon 44]# cat /proc/interrupts |  'CPU\|44:'
+           CPU0       CPU1       CPU2       CPU3      CPU4       CPU5        CPU6       CPU7
+ 44:       1068       1785       1785       1783      1784       1069        1070       1069   IO-APIC-level  eth1
+
+This time around IRQ44 was delivered only to the last four processors.
+i.e counters for the CPU0-3 did not change.