[SCSI] bfa: Flash controller IOC pll init fixes.

Made changes to resume the flash controller if it is halted before going
ahead with flash controller pause/resume logic.
Made changes to avoid clearing off the interrupts during the initial
pll initialization.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/bfa/bfa_ioc_ct.c

@@ -786,75 +786,136 @@ bfa_ioc_ct2_mac_reset(void __iomem *rb)
 }
 
 #define CT2_NFC_MAX_DELAY	1000
+#define CT2_NFC_VER_VALID	0x143
+#define BFA_IOC_PLL_POLL	1000000
+
+static bfa_boolean_t
+bfa_ioc_ct2_nfc_halted(void __iomem *rb)
+{
+	u32	r32;
+
+	r32 = readl(rb + CT2_NFC_CSR_SET_REG);
+	if (r32 & __NFC_CONTROLLER_HALTED)
+		return BFA_TRUE;
+
+	return BFA_FALSE;
+}
+
+static void
+bfa_ioc_ct2_nfc_resume(void __iomem *rb)
+{
+	u32	r32;
+	int i;
+
+	writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_CLR_REG);
+	for (i = 0; i < CT2_NFC_MAX_DELAY; i++) {
+		r32 = readl(rb + CT2_NFC_CSR_SET_REG);
+		if (!(r32 & __NFC_CONTROLLER_HALTED))
+			return;
+		udelay(1000);
+	}
+	WARN_ON(1);
+}
+
 bfa_status_t
 bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode mode)
 {
-	u32	wgn, r32;
-	int i;
+	u32 wgn, r32, nfc_ver, i;
 
-	/*
-	 * Initialize PLL if not already done by NFC
-	 */
 	wgn = readl(rb + CT2_WGN_STATUS);
-	if (!(wgn & __GLBL_PF_VF_CFG_RDY)) {
+	nfc_ver = readl(rb + CT2_RSC_GPR15_REG);
+
+	if ((wgn == (__A2T_AHB_LOAD | __WGN_READY)) &&
+	    (nfc_ver >= CT2_NFC_VER_VALID)) {
+		if (bfa_ioc_ct2_nfc_halted(rb))
+			bfa_ioc_ct2_nfc_resume(rb);
+
+		writel(__RESET_AND_START_SCLK_LCLK_PLLS,
+		       rb + CT2_CSI_FW_CTL_SET_REG);
+
+		for (i = 0; i < BFA_IOC_PLL_POLL; i++) {
+			r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG);
+			if (r32 & __RESET_AND_START_SCLK_LCLK_PLLS)
+				break;
+		}
+
+		WARN_ON(!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS));
+
+		for (i = 0; i < BFA_IOC_PLL_POLL; i++) {
+			r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG);
+			if (!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS))
+				break;
+		}
+
+		WARN_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS);
+		udelay(1000);
+
+		r32 = readl(rb + CT2_CSI_FW_CTL_REG);
+		WARN_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS);
+	} else {
 		writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_SET_REG);
 		for (i = 0; i < CT2_NFC_MAX_DELAY; i++) {
 			r32 = readl(rb + CT2_NFC_CSR_SET_REG);
 			if (r32 & __NFC_CONTROLLER_HALTED)
 				break;
 			udelay(1000);
 		}
-	}
 
-	/*
-	 * Mask the interrupts and clear any
-	 * pending interrupts.
-	 */
-	writel(1, (rb + CT2_LPU0_HOSTFN_MBOX0_MSK));
-	writel(1, (rb + CT2_LPU1_HOSTFN_MBOX0_MSK));
-
-	r32 = readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
-	if (r32 == 1) {
-		writel(1, (rb + CT2_LPU0_HOSTFN_CMD_STAT));
-		readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
+		bfa_ioc_ct2_mac_reset(rb);
+		bfa_ioc_ct2_sclk_init(rb);
+		bfa_ioc_ct2_lclk_init(rb);
+
+		/*
+		 * release soft reset on s_clk & l_clk
+		 */
+		r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG);
+		writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET,
+		       (rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+		/*
+		 * release soft reset on s_clk & l_clk
+		 */
+		r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG);
+		writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET,
+		      (rb + CT2_APP_PLL_LCLK_CTL_REG));
 	}
-	r32 = readl((rb + CT2_LPU1_HOSTFN_CMD_STAT));
-	if (r32 == 1) {
-		writel(1, (rb + CT2_LPU1_HOSTFN_CMD_STAT));
-		readl((rb + CT2_LPU1_HOSTFN_CMD_STAT));
-	}
-
-	bfa_ioc_ct2_mac_reset(rb);
-	bfa_ioc_ct2_sclk_init(rb);
-	bfa_ioc_ct2_lclk_init(rb);
-
-	/*
-	 * release soft reset on s_clk & l_clk
-	 */
-	r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
-	writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET,
-		(rb + CT2_APP_PLL_SCLK_CTL_REG));
-
-	/*
-	 * release soft reset on s_clk & l_clk
-	 */
-	r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
-	writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET,
-		(rb + CT2_APP_PLL_LCLK_CTL_REG));
 
 	/*
 	 * Announce flash device presence, if flash was corrupted.
 	 */
 	if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) {
-		r32 = readl((rb + PSS_GPIO_OUT_REG));
+		r32 = readl(rb + PSS_GPIO_OUT_REG);
 		writel(r32 & ~1, (rb + PSS_GPIO_OUT_REG));
-		r32 = readl((rb + PSS_GPIO_OE_REG));
+		r32 = readl(rb + PSS_GPIO_OE_REG);
 		writel(r32 | 1, (rb + PSS_GPIO_OE_REG));
 	}
 
+	/*
+	 * Mask the interrupts and clear any
+	 * pending interrupts.
+	 */
+	writel(1, (rb + CT2_LPU0_HOSTFN_MBOX0_MSK));
+	writel(1, (rb + CT2_LPU1_HOSTFN_MBOX0_MSK));
+
+	/* For first time initialization, no need to clear interrupts */
+	r32 = readl(rb + HOST_SEM5_REG);
+	if (r32 & 0x1) {
+		r32 = readl(rb + CT2_LPU0_HOSTFN_CMD_STAT);
+		if (r32 == 1) {
+			writel(1, rb + CT2_LPU0_HOSTFN_CMD_STAT);
+			readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
+		}
+		r32 = readl(rb + CT2_LPU1_HOSTFN_CMD_STAT);
+		if (r32 == 1) {
+			writel(1, rb + CT2_LPU1_HOSTFN_CMD_STAT);
+			readl(rb + CT2_LPU1_HOSTFN_CMD_STAT);
+		}
+	}
+
 	bfa_ioc_ct2_mem_init(rb);
 
-	writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC0_STATE_REG));
-	writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC1_STATE_REG));
+	writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC0_STATE_REG);
+	writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC1_STATE_REG);
+
 	return BFA_STATUS_OK;
 }

drivers/scsi/bfa/bfi_reg.h

@@ -335,11 +335,17 @@ enum {
 #define __PMM_1T_PNDB_P			0x00000002
 #define CT2_PMM_1T_CONTROL_REG_P1	0x00023c1c
 #define CT2_WGN_STATUS			0x00014990
+#define __A2T_AHB_LOAD			0x00000800
 #define __WGN_READY			0x00000400
 #define __GLBL_PF_VF_CFG_RDY		0x00000200
+#define CT2_NFC_CSR_CLR_REG		0x00027420
 #define CT2_NFC_CSR_SET_REG		0x00027424
 #define __HALT_NFC_CONTROLLER		0x00000002
 #define __NFC_CONTROLLER_HALTED		0x00001000
+#define CT2_RSC_GPR15_REG		0x0002765c
+#define CT2_CSI_FW_CTL_REG		0x00027080
+#define CT2_CSI_FW_CTL_SET_REG		0x00027088
+#define __RESET_AND_START_SCLK_LCLK_PLLS 0x00010000
 
 #define CT2_CSI_MAC0_CONTROL_REG	0x000270d0
 #define __CSI_MAC_RESET			0x00000010