Merge branch 'pinctrl-tegra-for-next-diet' into for-next

arch/arm/mach-tegra/Kconfig

@@ -7,6 +7,8 @@ config ARCH_TEGRA_2x_SOC
 	select CPU_V7
 	select ARM_GIC
 	select ARCH_REQUIRE_GPIOLIB
+	select PINCTRL
+	select PINCTRL_TEGRA20
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select USB_ULPI if USB_SUPPORT
 	select USB_ULPI_VIEWPORT if USB_SUPPORT
@@ -19,6 +21,8 @@ config ARCH_TEGRA_3x_SOC
 	select CPU_V7
 	select ARM_GIC
 	select ARCH_REQUIRE_GPIOLIB
+	select PINCTRL
+	select PINCTRL_TEGRA30
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select USB_ULPI if USB_SUPPORT
 	select USB_ULPI_VIEWPORT if USB_SUPPORT

arch/arm/mach-tegra/include/mach/pinconf-tegra.h

@@ -0,0 +1,63 @@
+/*
+ * pinctrl configuration definitions for the NVIDIA Tegra pinmux
+ *
+ * Copyright (c) 2011, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __PINCONF_TEGRA_H__
+#define __PINCONF_TEGRA_H__
+
+enum tegra_pinconf_param {
+	/* argument: tegra_pinconf_pull */
+	TEGRA_PINCONF_PARAM_PULL,
+	/* argument: tegra_pinconf_tristate */
+	TEGRA_PINCONF_PARAM_TRISTATE,
+	/* argument: Boolean */
+	TEGRA_PINCONF_PARAM_ENABLE_INPUT,
+	/* argument: Boolean */
+	TEGRA_PINCONF_PARAM_OPEN_DRAIN,
+	/* argument: Boolean */
+	TEGRA_PINCONF_PARAM_LOCK,
+	/* argument: Boolean */
+	TEGRA_PINCONF_PARAM_IORESET,
+	/* argument: Boolean */
+	TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE,
+	/* argument: Boolean */
+	TEGRA_PINCONF_PARAM_SCHMITT,
+	/* argument: Boolean */
+	TEGRA_PINCONF_PARAM_LOW_POWER_MODE,
+	/* argument: Integer, range is HW-dependant */
+	TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH,
+	/* argument: Integer, range is HW-dependant */
+	TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH,
+	/* argument: Integer, range is HW-dependant */
+	TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING,
+	/* argument: Integer, range is HW-dependant */
+	TEGRA_PINCONF_PARAM_SLEW_RATE_RISING,
+};
+
+enum tegra_pinconf_pull {
+	TEGRA_PINCONFIG_PULL_NONE,
+	TEGRA_PINCONFIG_PULL_DOWN,
+	TEGRA_PINCONFIG_PULL_UP,
+};
+
+enum tegra_pinconf_tristate {
+	TEGRA_PINCONFIG_DRIVEN,
+	TEGRA_PINCONFIG_TRISTATE,
+};
+
+#define TEGRA_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
+#define TEGRA_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
+#define TEGRA_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
+
+#endif

drivers/pinctrl/Kconfig

@@ -50,6 +50,21 @@ config PINCTRL_SIRF
 	depends on ARCH_PRIMA2
 	select PINMUX
 
+config PINCTRL_TEGRA
+	bool
+
+config PINCTRL_TEGRA20
+	bool
+	select PINMUX
+	select PINCONF
+	select PINCTRL_TEGRA
+
+config PINCTRL_TEGRA30
+	bool
+	select PINMUX
+	select PINCONF
+	select PINCTRL_TEGRA
+
 config PINCTRL_U300
 	bool "U300 pin controller driver"
 	depends on ARCH_U300

drivers/pinctrl/Makefile

@@ -10,5 +10,8 @@ obj-$(CONFIG_PINCTRL_MMP2)	+= pinctrl-mmp2.o
 obj-$(CONFIG_PINCTRL_PXA168)	+= pinctrl-pxa168.o
 obj-$(CONFIG_PINCTRL_PXA910)	+= pinctrl-pxa910.o
 obj-$(CONFIG_PINCTRL_SIRF)	+= pinctrl-sirf.o
+obj-$(CONFIG_PINCTRL_TEGRA)	+= pinctrl-tegra.o
+obj-$(CONFIG_PINCTRL_TEGRA20)	+= pinctrl-tegra20.o
+obj-$(CONFIG_PINCTRL_TEGRA30)	+= pinctrl-tegra30.o
 obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o