---

yaml
---
r: 123722
b: refs/heads/master
c: 89db948
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 1f7f569c0ae6e619504095eabf796edd712d943d
+refs/heads/master: 89db94825447a03f17e03c0a6c8840a0a22cf155

trunk/Documentation/local_ops.txt

@@ -149,7 +149,7 @@ static void do_test_timer(unsigned long data)
 	int cpu;
 
 	/* Increment the counters */
-	on_each_cpu(test_each, NULL, 0, 1);
+	on_each_cpu(test_each, NULL, 1);
 	/* Read all the counters */
 	printk("Counters read from CPU %d\n", smp_processor_id());
 	for_each_online_cpu(cpu) {

trunk/MAINTAINERS

@@ -779,6 +779,7 @@ ATM
 P:	Chas Williams
 M:	chas@cmf.nrl.navy.mil
 L:	linux-atm-general@lists.sourceforge.net (subscribers-only)
+L:	netdev@vger.kernel.org
 W:	http://linux-atm.sourceforge.net
 S:	Maintained
 
@@ -3758,6 +3759,15 @@ M:	drzeus-sdhci@drzeus.cx
 L:	sdhci-devel@list.drzeus.cx
 S:	Maintained
 
+SECURITY SUBSYSTEM
+F:	security/
+P:	James Morris
+M:	jmorris@namei.org
+L:	linux-kernel@vger.kernel.org
+L:	linux-security-module@vger.kernel.org (suggested Cc:)
+T:	git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+S:	Supported
+
 SECURITY CONTACT
 P:	Security Officers
 M:	security@kernel.org
@@ -4235,7 +4245,7 @@ M:	dedekind@infradead.org
 P:	Adrian Hunter
 M:	ext-adrian.hunter@nokia.com
 L:	linux-mtd@lists.infradead.org
-T:	git git://git.infradead.org/~dedekind/ubifs-2.6.git
+T:	git git://git.infradead.org/ubifs-2.6.git
 W:	http://www.linux-mtd.infradead.org/doc/ubifs.html
 S:	Maintained
 
@@ -4289,7 +4299,7 @@ P:	Artem Bityutskiy
 M:	dedekind@infradead.org
 W:	http://www.linux-mtd.infradead.org/
 L:	linux-mtd@lists.infradead.org
-T:	git git://git.infradead.org/~dedekind/ubi-2.6.git
+T:	git git://git.infradead.org/ubi-2.6.git
 S:	Maintained
 
 USB ACM DRIVER

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc8
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*

trunk/arch/arm/Kconfig

@@ -201,7 +201,6 @@ choice
 
 config ARCH_AAEC2000
 	bool "Agilent AAEC-2000 based"
-	select CPU_ARM920T
 	select ARM_AMBA
 	select HAVE_CLK
 	help
@@ -211,7 +210,6 @@ config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
 	select HAVE_CLK
-	select COMMON_CLKDEV
 	select ICST525
 	help
 	  Support for ARM's Integrator platform.
@@ -220,7 +218,6 @@ config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARM_AMBA
 	select HAVE_CLK
-	select COMMON_CLKDEV
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -232,7 +229,6 @@ config ARCH_VERSATILE
 	select ARM_AMBA
 	select ARM_VIC
 	select HAVE_CLK
-	select COMMON_CLKDEV
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -247,15 +243,22 @@ config ARCH_AT91
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
 
+config ARCH_CLPS7500
+	bool "Cirrus CL-PS7500FE"
+	select TIMER_ACORN
+	select ISA
+	select NO_IOPORT
+	select ARCH_SPARSEMEM_ENABLE
+	help
+	  Support for the Cirrus Logic PS7500FE system-on-a-chip.
+
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x-based"
-	select CPU_ARM720T
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
 config ARCH_EBSA110
 	bool "EBSA-110"
-	select CPU_SA110
 	select ISA
 	select NO_IOPORT
 	help
@@ -266,41 +269,35 @@ config ARCH_EBSA110
 
 config ARCH_EP93XX
 	bool "EP93xx-based"
-	select CPU_ARM920T
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
 config ARCH_FOOTBRIDGE
 	bool "FootBridge"
-	select CPU_SA110
 	select FOOTBRIDGE
 	help
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
 config ARCH_NETX
 	bool "Hilscher NetX based"
-	select CPU_ARM926T
 	select ARM_VIC
 	help
 	  This enables support for systems based on the Hilscher NetX Soc
 
 config ARCH_H720X
 	bool "Hynix HMS720x-based"
-	select CPU_ARM720T
 	select ISA_DMA_API
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
 config ARCH_IMX
 	bool "IMX"
-	select CPU_ARM920T
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -310,7 +307,6 @@ config ARCH_IMX
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
-	select CPU_XSC3
 	select PLAT_IOP
 	select PCI
 	select ARCH_SUPPORTS_MSI
@@ -321,7 +317,6 @@ config ARCH_IOP13XX
 config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
-	select CPU_XSCALE
 	select PLAT_IOP
 	select PCI
 	select GENERIC_GPIO
@@ -333,7 +328,6 @@ config ARCH_IOP32X
 config ARCH_IOP33X
 	bool "IOP33x-based"
 	depends on MMU
-	select CPU_XSCALE
 	select PLAT_IOP
 	select PCI
 	select GENERIC_GPIO
@@ -344,23 +338,20 @@ config ARCH_IOP33X
 config ARCH_IXP23XX
  	bool "IXP23XX-based"
 	depends on MMU
-	select CPU_XSC3
  	select PCI
 	help
 	  Support for Intel's IXP23xx (XScale) family of processors.
 
 config ARCH_IXP2000
 	bool "IXP2400/2800-based"
 	depends on MMU
-	select CPU_XSCALE
 	select PCI
 	help
 	  Support for Intel's IXP2400/2800 (XScale) family of processors.
 
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
-	select CPU_XSCALE
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -370,7 +361,6 @@ config ARCH_IXP4XX
 
 config ARCH_L7200
 	bool "LinkUp-L7200"
-	select CPU_ARM720T
 	select FIQ
 	help
 	  Say Y here if you intend to run this kernel on a LinkUp Systems
@@ -384,7 +374,6 @@ config ARCH_L7200
 
 config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
-	select CPU_FEROCEON
 	select PCI
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -395,16 +384,13 @@ config ARCH_KIRKWOOD
 
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
-	select CPU_ARM922T
 	select GENERIC_GPIO
-        select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
 
 config ARCH_NS9XXX
 	bool "NetSilicon NS9xxx"
-	select CPU_ARM926T
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -417,7 +403,6 @@ config ARCH_NS9XXX
 
 config ARCH_LOKI
 	bool "Marvell Loki (88RC8480)"
-	select CPU_FEROCEON
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
@@ -426,7 +411,6 @@ config ARCH_LOKI
 
 config ARCH_MV78XX0
 	bool "Marvell MV78xx0"
-	select CPU_FEROCEON
 	select PCI
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -448,7 +432,6 @@ config ARCH_MXC
 config ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU
-	select CPU_FEROCEON
 	select PCI
 	select GENERIC_GPIO
 	select GENERIC_TIME
@@ -461,7 +444,6 @@ config ARCH_ORION5X
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
-	select CPU_ARM926T
 	select HAVE_CLK
 	help
 	  This enables support for Philips PNX4008 mobile platform.
@@ -472,7 +454,6 @@ config ARCH_PXA
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -496,7 +477,6 @@ config ARCH_RPC
 
 config ARCH_SA1100
 	bool "SA1100-based"
-	select CPU_SA1100
 	select ISA
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_MTD_XIP
@@ -520,7 +500,6 @@ config ARCH_S3C2410
 
 config ARCH_SHARK
 	bool "Shark"
-	select CPU_SA110
 	select ISA
 	select ISA_DMA
 	select ZONE_DMA
@@ -531,7 +510,6 @@ config ARCH_SHARK
 
 config ARCH_LH7A40X
 	bool "Sharp LH7A40X"
-	select CPU_ARM922T
 	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
 	help
@@ -542,7 +520,6 @@ config ARCH_LH7A40X
 
 config ARCH_DAVINCI
 	bool "TI DaVinci"
-	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
@@ -564,7 +541,6 @@ config ARCH_OMAP
 
 config ARCH_MSM
 	bool "Qualcomm MSM"
-	select CPU_V6
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
@@ -573,13 +549,6 @@ config ARCH_MSM
 	  interface to the ARM9 modem processor which runs the baseband stack
 	  and controls some vital subsystems (clock and power control, etc).
 
-config ARCH_W90X900
-	bool "Nuvoton W90X900 CPU"
-	select CPU_ARM926T
-	help
-		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-		can login www.mcuos.com or www.nuvoton.com to know more.
-
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -658,8 +627,6 @@ source "arch/arm/mach-ks8695/Kconfig"
 
 source "arch/arm/mach-msm/Kconfig"
 
-source "arch/arm/mach-w90x900/Kconfig"
-
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
@@ -814,7 +781,7 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
-	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP)
+	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
 	default y
 	help
 	  Enable support for local timers on SMP platforms, rather then the

trunk/arch/arm/Makefile

@@ -76,7 +76,6 @@ tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
 tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
 tune-$(CONFIG_CPU_XSC3)		:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	:=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
 tune-$(CONFIG_CPU_V6)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
 
 ifeq ($(CONFIG_AEABI),y)
@@ -97,6 +96,7 @@ textofs-y	:= 0x00008000
 
  machine-$(CONFIG_ARCH_RPC)	   := rpc
  machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
+ machine-$(CONFIG_ARCH_CLPS7500)   := clps7500
  machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
  machine-$(CONFIG_ARCH_SHARK)	   := shark
  machine-$(CONFIG_ARCH_SA1100)	   := sa1100
@@ -144,7 +144,6 @@ endif
  machine-$(CONFIG_ARCH_MSM)	   := msm
  machine-$(CONFIG_ARCH_LOKI)       := loki
  machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
- machine-$(CONFIG_ARCH_W90X900)    := w90x900
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.

trunk/arch/arm/boot/compressed/Makefile

@@ -23,6 +23,10 @@ ifeq ($(CONFIG_ARCH_L7200),y)
 OBJS		+= head-l7200.o
 endif
 
+ifeq ($(CONFIG_ARCH_CLPS7500),y)
+HEAD		= head-clps7500.o
+endif
+
 ifeq ($(CONFIG_ARCH_P720T),y)
 # Borrow this code from SA1100
 OBJS		+= head-sa1100.o