s390/pci: CLP interface

CLP instructions are used to query the firmware about detected PCI
functions, the attributes of those functions and to enable or disable
a PCI function. The CLP interface is the equivalent to a PCI bus scan.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

arch/s390/include/asm/clp.h

@@ -0,0 +1,28 @@
+#ifndef _ASM_S390_CLP_H
+#define _ASM_S390_CLP_H
+
+/* CLP common request & response block size */
+#define CLP_BLK_SIZE			(PAGE_SIZE * 2)
+
+struct clp_req_hdr {
+	u16 len;
+	u16 cmd;
+} __packed;
+
+struct clp_rsp_hdr {
+	u16 len;
+	u16 rsp;
+} __packed;
+
+/* CLP Response Codes */
+#define CLP_RC_OK			0x0010	/* Command request successfully */
+#define CLP_RC_CMD			0x0020	/* Command code not recognized */
+#define CLP_RC_PERM			0x0030	/* Command not authorized */
+#define CLP_RC_FMT			0x0040	/* Invalid command request format */
+#define CLP_RC_LEN			0x0050	/* Invalid command request length */
+#define CLP_RC_8K			0x0060	/* Command requires 8K LPCB */
+#define CLP_RC_RESNOT0			0x0070	/* Reserved field not zero */
+#define CLP_RC_NODATA			0x0080	/* No data available */
+#define CLP_RC_FC_UNKNOWN		0x0100	/* Function code not recognized */
+
+#endif

arch/s390/include/asm/pci.h

@@ -8,6 +8,7 @@
 
 #include <asm-generic/pci.h>
 #include <asm-generic/pci-dma-compat.h>
+#include <asm/pci_clp.h>
 
 #define PCIBIOS_MIN_IO		0x1000
 #define PCIBIOS_MIN_MEM		0x10000000
@@ -76,6 +77,12 @@ void zpci_stop_device(struct zpci_dev *);
 void zpci_free_device(struct zpci_dev *);
 int zpci_scan_device(struct zpci_dev *);
 
+/* CLP */
+int clp_find_pci_devices(void);
+int clp_add_pci_device(u32, u32, int);
+int clp_enable_fh(struct zpci_dev *, u8);
+int clp_disable_fh(struct zpci_dev *);
+
 /* Helpers */
 struct zpci_dev *get_zdev(struct pci_dev *);
 struct zpci_dev *get_zdev_by_fid(u32);

arch/s390/include/asm/pci_clp.h

@@ -0,0 +1,182 @@
+#ifndef _ASM_S390_PCI_CLP_H
+#define _ASM_S390_PCI_CLP_H
+
+#include <asm/clp.h>
+
+/*
+ * Call Logical Processor - Command Codes
+ */
+#define CLP_LIST_PCI		0x0002
+#define CLP_QUERY_PCI_FN	0x0003
+#define CLP_QUERY_PCI_FNGRP	0x0004
+#define CLP_SET_PCI_FN		0x0005
+
+/* PCI function handle list entry */
+struct clp_fh_list_entry {
+	u16 device_id;
+	u16 vendor_id;
+	u32 config_state :  1;
+	u32		 : 31;
+	u32 fid;		/* PCI function id */
+	u32 fh;			/* PCI function handle */
+} __packed;
+
+#define CLP_RC_SETPCIFN_FH	0x0101	/* Invalid PCI fn handle */
+#define CLP_RC_SETPCIFN_FHOP	0x0102	/* Fn handle not valid for op */
+#define CLP_RC_SETPCIFN_DMAAS	0x0103	/* Invalid DMA addr space */
+#define CLP_RC_SETPCIFN_RES	0x0104	/* Insufficient resources */
+#define CLP_RC_SETPCIFN_ALRDY	0x0105	/* Fn already in requested state */
+#define CLP_RC_SETPCIFN_ERR	0x0106	/* Fn in permanent error state */
+#define CLP_RC_SETPCIFN_RECPND	0x0107	/* Error recovery pending */
+#define CLP_RC_SETPCIFN_BUSY	0x0108	/* Fn busy */
+#define CLP_RC_LISTPCI_BADRT	0x010a	/* Resume token not recognized */
+#define CLP_RC_QUERYPCIFG_PFGID	0x010b	/* Unrecognized PFGID */
+
+/* request or response block header length */
+#define LIST_PCI_HDR_LEN	32
+
+/* Number of function handles fitting in response block */
+#define CLP_FH_LIST_NR_ENTRIES				\
+	((CLP_BLK_SIZE - 2 * LIST_PCI_HDR_LEN)		\
+		/ sizeof(struct clp_fh_list_entry))
+
+#define CLP_SET_ENABLE_PCI_FN	0	/* Yes, 0 enables it */
+#define CLP_SET_DISABLE_PCI_FN	1	/* Yes, 1 disables it */
+
+#define CLP_UTIL_STR_LEN	64
+
+/* List PCI functions request */
+struct clp_req_list_pci {
+	struct clp_req_hdr hdr;
+	u32 fmt			:  4;	/* cmd request block format */
+	u32			: 28;
+	u64 reserved1;
+	u64 resume_token;
+	u64 reserved2;
+} __packed;
+
+/* List PCI functions response */
+struct clp_rsp_list_pci {
+	struct clp_rsp_hdr hdr;
+	u32 fmt			:  4;	/* cmd request block format */
+	u32			: 28;
+	u64 reserved1;
+	u64 resume_token;
+	u32 reserved2;
+	u16 max_fn;
+	u8 reserved3;
+	u8 entry_size;
+	struct clp_fh_list_entry fh_list[CLP_FH_LIST_NR_ENTRIES];
+} __packed;
+
+/* Query PCI function request */
+struct clp_req_query_pci {
+	struct clp_req_hdr hdr;
+	u32 fmt			:  4;	/* cmd request block format */
+	u32			: 28;
+	u64 reserved1;
+	u32 fh;				/* function handle */
+	u32 reserved2;
+	u64 reserved3;
+} __packed;
+
+/* Query PCI function response */
+struct clp_rsp_query_pci {
+	struct clp_rsp_hdr hdr;
+	u32 fmt			:  4;	/* cmd request block format */
+	u32			: 28;
+	u64 reserved1;
+	u16 vfn;			/* virtual fn number */
+	u16			:  7;
+	u16 util_str_avail	:  1;	/* utility string available? */
+	u16 pfgid		:  8;	/* pci function group id */
+	u32 fid;			/* pci function id */
+	u8 bar_size[PCI_BAR_COUNT];
+	u16 pchid;
+	u32 bar[PCI_BAR_COUNT];
+	u64 reserved2;
+	u64 sdma;			/* start dma as */
+	u64 edma;			/* end dma as */
+	u64 reserved3[6];
+	u8 util_str[CLP_UTIL_STR_LEN];	/* utility string */
+} __packed;
+
+/* Query PCI function group request */
+struct clp_req_query_pci_grp {
+	struct clp_req_hdr hdr;
+	u32 fmt			:  4;	/* cmd request block format */
+	u32			: 28;
+	u64 reserved1;
+	u32			: 24;
+	u32 pfgid		:  8;	/* function group id */
+	u32 reserved2;
+	u64 reserved3;
+} __packed;
+
+/* Query PCI function group response */
+struct clp_rsp_query_pci_grp {
+	struct clp_rsp_hdr hdr;
+	u32 fmt			:  4;	/* cmd request block format */
+	u32			: 28;
+	u64 reserved1;
+	u16			:  4;
+	u16 noi			: 12;	/* number of interrupts */
+	u8 version;
+	u8			:  6;
+	u8 frame		:  1;
+	u8 refresh		:  1;	/* TLB refresh mode */
+	u16 reserved2;
+	u16 mui;
+	u64 reserved3;
+	u64 dasm;			/* dma address space mask */
+	u64 msia;			/* MSI address */
+	u64 reserved4;
+	u64 reserved5;
+} __packed;
+
+/* Set PCI function request */
+struct clp_req_set_pci {
+	struct clp_req_hdr hdr;
+	u32 fmt			:  4;	/* cmd request block format */
+	u32			: 28;
+	u64 reserved1;
+	u32 fh;				/* function handle */
+	u16 reserved2;
+	u8 oc;				/* operation controls */
+	u8 ndas;			/* number of dma spaces */
+	u64 reserved3;
+} __packed;
+
+/* Set PCI function response */
+struct clp_rsp_set_pci {
+	struct clp_rsp_hdr hdr;
+	u32 fmt			:  4;	/* cmd request block format */
+	u32			: 28;
+	u64 reserved1;
+	u32 fh;				/* function handle */
+	u32 reserved3;
+	u64 reserved4;
+} __packed;
+
+/* Combined request/response block structures used by clp insn */
+struct clp_req_rsp_list_pci {
+	struct clp_req_list_pci request;
+	struct clp_rsp_list_pci response;
+} __packed;
+
+struct clp_req_rsp_set_pci {
+	struct clp_req_set_pci request;
+	struct clp_rsp_set_pci response;
+} __packed;
+
+struct clp_req_rsp_query_pci {
+	struct clp_req_query_pci request;
+	struct clp_rsp_query_pci response;
+} __packed;
+
+struct clp_req_rsp_query_pci_grp {
+	struct clp_req_query_pci_grp request;
+	struct clp_rsp_query_pci_grp response;
+} __packed;
+
+#endif

arch/s390/pci/Makefile

@@ -2,4 +2,4 @@
 # Makefile for the s390 PCI subsystem.
 #
 
-obj-$(CONFIG_PCI)	+= pci.o
+obj-$(CONFIG_PCI)	+= pci.o pci_clp.o

arch/s390/pci/pci.c

@@ -29,6 +29,7 @@
 
 #include <asm/facility.h>
 #include <asm/pci_insn.h>
+#include <asm/pci_clp.h>
 
 #define DEBUG				/* enable pr_debug */
 
@@ -436,6 +437,20 @@ static void zpci_free_domain(struct zpci_dev *zdev)
 	spin_unlock(&zpci_domain_lock);
 }
 
+int zpci_enable_device(struct zpci_dev *zdev)
+{
+	int rc;
+
+	rc = clp_enable_fh(zdev, ZPCI_NR_DMA_SPACES);
+	if (rc)
+		goto out;
+	pr_info("Enabled fh: 0x%x fid: 0x%x\n", zdev->fh, zdev->fid);
+	return 0;
+out:
+	return rc;
+}
+EXPORT_SYMBOL_GPL(zpci_enable_device);
+
 int zpci_create_device(struct zpci_dev *zdev)
 {
 	int rc;
@@ -455,8 +470,15 @@ int zpci_create_device(struct zpci_dev *zdev)
 	if (zdev->state == ZPCI_FN_STATE_STANDBY)
 		return 0;
 
+	rc = zpci_enable_device(zdev);
+	if (rc)
+		goto out_start;
 	return 0;
 
+out_start:
+	mutex_lock(&zpci_list_lock);
+	list_del(&zdev->entry);
+	mutex_unlock(&zpci_list_lock);
 out_bus:
 	zpci_free_domain(zdev);
 out:
@@ -489,6 +511,7 @@ int zpci_scan_device(struct zpci_dev *zdev)
 	return 0;
 
 out:
+	clp_disable_fh(zdev);
 	return -EIO;
 }
 EXPORT_SYMBOL_GPL(zpci_scan_device);
@@ -547,9 +570,14 @@ static int __init pci_base_init(void)
 	if (rc)
 		goto out_mem;
 
+	rc = clp_find_pci_devices();
+	if (rc)
+		goto out_find;
+
 	zpci_scan_devices();
 	return 0;
 
+out_find:
 	zpci_mem_exit();
 out_mem:
 	return rc;