[WATCHDOG] Some more general cleanup

Clean-up the watchdog drivers so that checkpatch.pl get's happy...

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

drivers/watchdog/alim7101_wdt.c

@@ -322,7 +322,8 @@ static int wdt_notify_sys(struct notifier_block *this,
 		 * watchdog on reboot with no heartbeat
 		 */
 		wdt_change(WDT_ENABLE);
-		printk(KERN_INFO PFX "Watchdog timer is now enabled with no heartbeat - should reboot in ~1 second.\n");
+		printk(KERN_INFO PFX "Watchdog timer is now enabled "
+			"with no heartbeat - should reboot in ~1 second.\n");
 	}
 	return NOTIFY_DONE;
 }
@@ -374,12 +375,17 @@ static int __init alim7101_wdt_init(void)
 	pci_dev_put(ali1543_south);
 	if ((tmp & 0x1e) == 0x00) {
 		if (!use_gpio) {
-			printk(KERN_INFO PFX "Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.\n");
+			printk(KERN_INFO PFX
+				"Detected old alim7101 revision 'a1d'.  "
+				"If this is a cobalt board, set the 'use_gpio' "
+				"module parameter.\n");
 			goto err_out;
 		}
 		nowayout = 1;
 	} else if ((tmp & 0x1e) != 0x12 && (tmp & 0x1e) != 0x00) {
-		printk(KERN_INFO PFX "ALi 1543 South-Bridge does not have the correct revision number (???1001?) - WDT not set\n");
+		printk(KERN_INFO PFX
+			"ALi 1543 South-Bridge does not have the correct "
+			"revision number (???1001?) - WDT not set\n");
 		goto err_out;
 	}
 
@@ -409,7 +415,8 @@ static int __init alim7101_wdt_init(void)
 	if (nowayout)
 		__module_get(THIS_MODULE);
 
-	printk(KERN_INFO PFX "WDT driver for ALi M7101 initialised. timeout=%d sec (nowayout=%d)\n",
+	printk(KERN_INFO PFX "WDT driver for ALi M7101 initialised. "
+					"timeout=%d sec (nowayout=%d)\n",
 		timeout, nowayout);
 	return 0;
 

drivers/watchdog/at91rm9200_wdt.c

@@ -268,7 +268,8 @@ static int __init at91_wdt_init(void)
 	   if not reset to the default */
 	if (at91_wdt_settimeout(wdt_time)) {
 		at91_wdt_settimeout(WDT_DEFAULT_TIME);
-		pr_info("at91_wdt: wdt_time value must be 1 <= wdt_time <= 256, using %d\n", wdt_time);
+		pr_info("at91_wdt: wdt_time value must be 1 <= wdt_time <= 256"
+						", using %d\n", wdt_time);
 	}
 
 	return platform_driver_register(&at91wdt_driver);

drivers/watchdog/bfin_wdt.c

@@ -27,10 +27,15 @@
 #include <linux/uaccess.h>
 #include <asm/blackfin.h>
 
-#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
+#define stamp(fmt, args...) \
+	pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
 #define stampit() stamp("here i am")
-#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
-#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); })
+#define pr_devinit(fmt, args...) \
+	({ static const __devinitconst char __fmt[] = fmt; \
+	printk(__fmt, ## args); })
+#define pr_init(fmt, args...) \
+	({ static const __initconst char __fmt[] = fmt; \
+	printk(__fmt, ## args); })
 
 #define WATCHDOG_NAME "bfin-wdt"
 #define PFX WATCHDOG_NAME ": "
@@ -476,7 +481,8 @@ static int __init bfin_wdt_init(void)
 		return ret;
 	}
 
-	bfin_wdt_device = platform_device_register_simple(WATCHDOG_NAME, -1, NULL, 0);
+	bfin_wdt_device = platform_device_register_simple(WATCHDOG_NAME,
+								-1, NULL, 0);
 	if (IS_ERR(bfin_wdt_device)) {
 		pr_init(KERN_ERR PFX "unable to register device\n");
 		platform_driver_unregister(&bfin_wdt_driver);

drivers/watchdog/cpwd.c

@@ -154,9 +154,9 @@ static struct cpwd *cpwd_device;
 
 static struct timer_list cpwd_timer;
 
-static int wd0_timeout = 0;
-static int wd1_timeout = 0;
-static int wd2_timeout = 0;
+static int wd0_timeout;
+static int wd1_timeout;
+static int wd2_timeout;
 
 module_param(wd0_timeout, int, 0);
 MODULE_PARM_DESC(wd0_timeout, "Default watchdog0 timeout in 1/10secs");

drivers/watchdog/ks8695_wdt.c

@@ -293,8 +293,8 @@ static int __init ks8695_wdt_init(void)
 	   if not reset to the default */
 	if (ks8695_wdt_settimeout(wdt_time)) {
 		ks8695_wdt_settimeout(WDT_DEFAULT_TIME);
-		pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i, using %d\n",
-							wdt_time, WDT_MAX_TIME);
+		pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i"
+					", using %d\n", wdt_time, WDT_MAX_TIME);
 	}
 	return platform_driver_register(&ks8695wdt_driver);
 }

drivers/watchdog/machzwd.c

@@ -118,7 +118,8 @@ static struct watchdog_info zf_info = {
  */
 static int action;
 module_param(action, int, 0);
-MODULE_PARM_DESC(action, "after watchdog resets, generate: 0 = RESET(*)  1 = SMI  2 = NMI  3 = SCI");
+MODULE_PARM_DESC(action, "after watchdog resets, generate: "
+				"0 = RESET(*)  1 = SMI  2 = NMI  3 = SCI");
 
 static void zf_ping(unsigned long data);
 
@@ -142,7 +143,8 @@ static unsigned long next_heartbeat;
 #ifndef ZF_DEBUG
 #	define dprintk(format, args...)
 #else
-#	define dprintk(format, args...) printk(KERN_DEBUG PFX ":%s:%d: " format, __func__, __LINE__ , ## args)
+#	define dprintk(format, args...) printk(KERN_DEBUG PFX
+				":%s:%d: " format, __func__, __LINE__ , ## args)
 #endif
 
 
@@ -340,7 +342,8 @@ static int zf_close(struct inode *inode, struct file *file)
 		zf_timer_off();
 	else {
 		del_timer(&zf_timer);
-		printk(KERN_ERR PFX ": device file closed unexpectedly. Will not stop the WDT!\n");
+		printk(KERN_ERR PFX ": device file closed unexpectedly. "
+						"Will not stop the WDT!\n");
 	}
 	clear_bit(0, &zf_is_open);
 	zf_expect_close = 0;

drivers/watchdog/mpcore_wdt.c

@@ -61,7 +61,9 @@ MODULE_PARM_DESC(nowayout,
 #define ONLY_TESTING	0
 static int mpcore_noboot = ONLY_TESTING;
 module_param(mpcore_noboot, int, 0);
-MODULE_PARM_DESC(mpcore_noboot, "MPcore watchdog action, set to 1 to ignore reboots, 0 to reboot (default=" __MODULE_STRING(ONLY_TESTING) ")");
+MODULE_PARM_DESC(mpcore_noboot, "MPcore watchdog action, "
+	"set to 1 to ignore reboots, 0 to reboot (default="
+					__MODULE_STRING(ONLY_TESTING) ")");
 
 /*
  *	This is the interrupt handler.  Note that we only use this
@@ -416,7 +418,8 @@ static struct platform_driver mpcore_wdt_driver = {
 	},
 };
 
-static char banner[] __initdata = KERN_INFO "MPcore Watchdog Timer: 0.1. mpcore_noboot=%d mpcore_margin=%d sec (nowayout= %d)\n";
+static char banner[] __initdata = KERN_INFO "MPcore Watchdog Timer: 0.1. "
+		"mpcore_noboot=%d mpcore_margin=%d sec (nowayout= %d)\n";
 
 static int __init mpcore_wdt_init(void)
 {

drivers/watchdog/s3c2410_wdt.c

@@ -68,23 +68,18 @@ MODULE_PARM_DESC(tmr_atboot,
 			__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default depends on ONLY_TESTING)");
+MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
+			"0 to reboot (default depends on ONLY_TESTING)");
 MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)");
 
-
-typedef enum close_state {
-	CLOSE_STATE_NOT,
-	CLOSE_STATE_ALLOW = 0x4021
-} close_state_t;
-
 static unsigned long open_lock;
 static struct device    *wdt_dev;	/* platform device attached to */
 static struct resource	*wdt_mem;
 static struct resource	*wdt_irq;
 static struct clk	*wdt_clock;
 static void __iomem	*wdt_base;
 static unsigned int	 wdt_count;
-static close_state_t	 allow_close;
+static char		 expect_close;
 static DEFINE_SPINLOCK(wdt_lock);
 
 /* watchdog control routines */
@@ -211,7 +206,7 @@ static int s3c2410wdt_open(struct inode *inode, struct file *file)
 	if (nowayout)
 		__module_get(THIS_MODULE);
 
-	allow_close = CLOSE_STATE_NOT;
+	expect_close = 0;
 
 	/* start the timer */
 	s3c2410wdt_start();
@@ -225,13 +220,13 @@ static int s3c2410wdt_release(struct inode *inode, struct file *file)
 	 * 	Lock it in if it's a module and we set nowayout
 	 */
 
-	if (allow_close == CLOSE_STATE_ALLOW)
+	if (expect_close == 42)
 		s3c2410wdt_stop();
 	else {
 		dev_err(wdt_dev, "Unexpected close, not stopping watchdog\n");
 		s3c2410wdt_keepalive();
 	}
-	allow_close = CLOSE_STATE_NOT;
+	expect_close = 0;
 	clear_bit(0, &open_lock);
 	return 0;
 }
@@ -247,23 +242,23 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data,
 			size_t i;
 
 			/* In case it was set long ago */
-			allow_close = CLOSE_STATE_NOT;
+			expect_close = 0;
 
 			for (i = 0; i != len; i++) {
 				char c;
 
 				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
-					allow_close = CLOSE_STATE_ALLOW;
+					expect_close = 42;
 			}
 		}
 		s3c2410wdt_keepalive();
 	}
 	return len;
 }
 
-#define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE
+#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
 
 static const struct watchdog_info s3c2410_wdt_ident = {
 	.options          =     OPTIONS,
@@ -331,7 +326,7 @@ static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
 }
 /* device interface */
 
-static int s3c2410wdt_probe(struct platform_device *pdev)
+static int __devinit s3c2410wdt_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	struct device *dev;
@@ -404,7 +399,8 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 			   "tmr_margin value out of range, default %d used\n",
 			       CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
 		else
-			dev_info(dev, "default timer value is out of range, cannot start\n");
+			dev_info(dev, "default timer value is out of range, "
+							"cannot start\n");
 	}
 
 	ret = misc_register(&s3c2410wdt_miscdev);
@@ -453,7 +449,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int s3c2410wdt_remove(struct platform_device *dev)
+static int __devexit s3c2410wdt_remove(struct platform_device *dev)
 {
 	release_resource(wdt_mem);
 	kfree(wdt_mem);
@@ -515,7 +511,7 @@ static int s3c2410wdt_resume(struct platform_device *dev)
 
 static struct platform_driver s3c2410wdt_driver = {
 	.probe		= s3c2410wdt_probe,
-	.remove		= s3c2410wdt_remove,
+	.remove		= __devexit_p(s3c2410wdt_remove),
 	.shutdown	= s3c2410wdt_shutdown,
 	.suspend	= s3c2410wdt_suspend,
 	.resume		= s3c2410wdt_resume,

drivers/watchdog/sb_wdog.c

@@ -269,9 +269,10 @@ irqreturn_t sbwdog_interrupt(int irq, void *addr)
 	 * if it's the second watchdog timer, it's for those users
 	 */
 	if (wd_cfg_reg == user_dog)
-		printk(KERN_CRIT
-			"%s in danger of initiating system reset in %ld.%01ld seconds\n",
-			ident.identity, wd_init / 1000000, (wd_init / 100000) % 10);
+		printk(KERN_CRIT "%s in danger of initiating system reset "
+			"in %ld.%01ld seconds\n",
+			ident.identity,
+			wd_init / 1000000, (wd_init / 100000) % 10);
 	else
 		cfg |= 1;
 

drivers/watchdog/sbc60xxwdt.c

@@ -372,8 +372,9 @@ static int __init sbc60xxwdt_init(void)
 						wdt_miscdev.minor, rc);
 		goto err_out_reboot;
 	}
-	printk(KERN_INFO PFX "WDT driver for 60XX single board computer initialised. timeout=%d sec (nowayout=%d)\n",
-		timeout, nowayout);
+	printk(KERN_INFO PFX
+		"WDT driver for 60XX single board computer initialised. "
+		"timeout=%d sec (nowayout=%d)\n", timeout, nowayout);
 
 	return 0;
 

drivers/watchdog/sbc8360.c

@@ -280,8 +280,8 @@ static int sbc8360_close(struct inode *inode, struct file *file)
 	if (expect_close == 42)
 		sbc8360_stop();
 	else
-		printk(KERN_CRIT PFX
-			"SBC8360 device closed unexpectedly.  SBC8360 will not stop!\n");
+		printk(KERN_CRIT PFX "SBC8360 device closed unexpectedly.  "
+						"SBC8360 will not stop!\n");
 
 	clear_bit(0, &sbc8360_is_open);
 	expect_close = 0;

drivers/watchdog/sbc_epx_c3.c

@@ -174,8 +174,8 @@ static struct notifier_block epx_c3_notifier = {
 	.notifier_call = epx_c3_notify_sys,
 };
 
-static const char banner[] __initdata =
-    KERN_INFO PFX "Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1\n";
+static const char banner[] __initdata = KERN_INFO PFX
+	"Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1\n";
 
 static int __init watchdog_init(void)
 {
@@ -219,6 +219,9 @@ module_init(watchdog_init);
 module_exit(watchdog_exit);
 
 MODULE_AUTHOR("Calin A. Culianu <calin@ajvar.org>");
-MODULE_DESCRIPTION("Hardware Watchdog Device for Winsystems EPX-C3 SBC.  Note that there is no way to probe for this device -- so only use it if you are *sure* you are runnning on this specific SBC system from Winsystems!  It writes to IO ports 0x1ee and 0x1ef!");
+MODULE_DESCRIPTION("Hardware Watchdog Device for Winsystems EPX-C3 SBC.  "
+	"Note that there is no way to probe for this device -- "
+	"so only use it if you are *sure* you are runnning on this specific "
+	"SBC system from Winsystems!  It writes to IO ports 0x1ee and 0x1ef!");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);

drivers/watchdog/scx200_wdt.c

@@ -108,7 +108,9 @@ static int scx200_wdt_open(struct inode *inode, struct file *file)
 static int scx200_wdt_release(struct inode *inode, struct file *file)
 {
 	if (expect_close != 42)
-		printk(KERN_WARNING NAME ": watchdog device closed unexpectedly, will not disable the watchdog timer\n");
+		printk(KERN_WARNING NAME
+			": watchdog device closed unexpectedly, "
+			"will not disable the watchdog timer\n");
 	else if (!nowayout)
 		scx200_wdt_disable();
 	expect_close = 0;

drivers/watchdog/shwdt.c

@@ -494,7 +494,9 @@ MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 
 module_param(clock_division_ratio, int, 0);
-MODULE_PARM_DESC(clock_division_ratio, "Clock division ratio. Valid ranges are from 0x5 (1.31ms) to 0x7 (5.25ms). (default=" __MODULE_STRING(clock_division_ratio) ")");
+MODULE_PARM_DESC(clock_division_ratio,
+	"Clock division ratio. Valid ranges are from 0x5 (1.31ms) "
+	"to 0x7 (5.25ms). (default=" __MODULE_STRING(clock_division_ratio) ")");
 
 module_param(heartbeat, int, 0);
 MODULE_PARM_DESC(heartbeat,

drivers/watchdog/softdog.c

@@ -71,7 +71,9 @@ static int soft_noboot = 0;
 #endif  /* ONLY_TESTING */
 
 module_param(soft_noboot, int, 0);
-MODULE_PARM_DESC(soft_noboot, "Softdog action, set to 1 to ignore reboots, 0 to reboot (default depends on ONLY_TESTING)");
+MODULE_PARM_DESC(soft_noboot,
+	"Softdog action, set to 1 to ignore reboots, 0 to reboot "
+					"(default depends on ONLY_TESTING)");
 
 /*
  *	Our timer
@@ -264,7 +266,8 @@ static struct notifier_block softdog_notifier = {
 	.notifier_call	= softdog_notify_sys,
 };
 
-static char banner[] __initdata = KERN_INFO "Software Watchdog Timer: 0.07 initialized. soft_noboot=%d soft_margin=%d sec (nowayout= %d)\n";
+static char banner[] __initdata = KERN_INFO "Software Watchdog Timer: 0.07 "
+	"initialized. soft_noboot=%d soft_margin=%d sec (nowayout= %d)\n";
 
 static int __init watchdog_init(void)
 {

drivers/watchdog/w83697hf_wdt.c

@@ -413,7 +413,8 @@ static int __init wdt_init(void)
 	w83697hf_init();
 	if (early_disable) {
 		if (wdt_running())
-			printk(KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n");
+			printk(KERN_WARNING PFX "Stopping previously enabled "
+					"watchdog until userland kicks in\n");
 		wdt_disable();
 	}
 

drivers/watchdog/wdrtas.c

@@ -49,12 +49,7 @@ MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 MODULE_ALIAS_MISCDEV(TEMP_MINOR);
 
-#ifdef CONFIG_WATCHDOG_NOWAYOUT
-static int wdrtas_nowayout = 1;
-#else
-static int wdrtas_nowayout = 0;
-#endif
-
+static int wdrtas_nowayout = WATCHDOG_NOWAYOUT;
 static atomic_t wdrtas_miscdev_open = ATOMIC_INIT(0);
 static char wdrtas_expect_close;