---

yaml
---
r: 124188
b: refs/heads/master
c: 864ec0b
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ebef13d480f0223512963ee785bd93770d404fe3
+refs/heads/master: 864ec0b7a03c8401e6e49f9e480489478ea14cb5

trunk/Documentation/video4linux/CARDLIST.em28xx

@@ -57,3 +57,4 @@
  56 -> Pinnacle Hybrid Pro (2)                  (em2882)        [2304:0226]
  57 -> Kworld PlusTV HD Hybrid 330              (em2883)        [eb1a:a316]
  58 -> Compro VideoMate ForYou/Stereo           (em2820/em2840) [185b:2041]
+ 59 -> Pinnacle PCTV HD Mini                    (em2874)        [2304:023f]

trunk/drivers/media/video/em28xx/em28xx-cards.c

@@ -1087,6 +1087,20 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
+	[EM2874_BOARD_PINNACLE_PCTV_80E] = {
+		.name         = "Pinnacle PCTV HD Mini",
+		.vchannels    = 0,
+		.tuner_type   = TUNER_ABSENT,
+		.has_dvb        = 1,
+		.decoder      = EM28XX_NODECODER,
+#ifdef DJH_DEBUG
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = EM28XX_AMUX_LINE_IN,
+		} },
+#endif
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -1180,6 +1194,8 @@ struct usb_device_id em28xx_id_table [] = {
 			.driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
 	{ USB_DEVICE(0x2304, 0x0227),
 			.driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
+	{ USB_DEVICE(0x2304, 0x023f),
+			.driver_info = EM2874_BOARD_PINNACLE_PCTV_80E },
 	{ USB_DEVICE(0x0413, 0x6023),
 			.driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
 	{ USB_DEVICE(0x093b, 0xa005),
@@ -1255,6 +1271,17 @@ static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = {
 	{  -1,			-1,	-1,		  -1},
 };
 
+/* Pinnacle PCTV HD Mini (80e) GPIOs
+   0-5: not used
+   6:   demod reset, active low
+   7:   LED on, active high */
+static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
+	{EM28XX_R06_I2C_CLK,    0x45,   0xff,		  10}, /*400 KHz*/
+	{EM2874_R80_GPIO,       0x80,   0xff,		  100},/*Demod reset*/
+	{EM2874_R80_GPIO,       0xc0,   0xff,		  10},
+	{  -1,			-1,	-1,		  -1},
+};
+
 /*
  * EEPROM hash table for devices with generic USB IDs
  */
@@ -1518,6 +1545,13 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 		/* enables audio for that device */
 		em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
 		break;
+
+	case EM2874_BOARD_PINNACLE_PCTV_80E:
+		/* Set 400 KHz clock */
+		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x45", 1);
+
+		dev->digital_gpio = em2874_pinnacle_80e_digital;
+		break;
 	}
 
 	em28xx_gpio_set(dev, dev->tun_analog_gpio);

trunk/drivers/media/video/em28xx/em28xx.h

@@ -97,6 +97,7 @@
 #define EM2882_BOARD_PINNACLE_HYBRID_PRO	  56
 #define EM2883_BOARD_KWORLD_HYBRID_A316		  57
 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU	  58
+#define EM2874_BOARD_PINNACLE_PCTV_80E		  59
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4