Skip to content

Commit

Permalink
---
Browse files Browse the repository at this point in the history
yaml
---
r: 132929
b: refs/heads/master
c: 72d7466
h: refs/heads/master
i:
  132927: dc79410
v: v3
  • Loading branch information
Daniel Mack authored and Mark Brown committed Mar 13, 2009
1 parent caaaa91 commit a9cdb4d
Show file tree
Hide file tree
Showing 9 changed files with 58 additions and 125 deletions.
2 changes: 1 addition & 1 deletion [refs]
Original file line number Diff line number Diff line change
@@ -1,2 +1,2 @@
---
refs/heads/master: d2314e0e27566f8830ebed3587cc049e07e6a4ee
refs/heads/master: 72d7466468b471f99cefae3c5f4a414bbbaa0bdd
15 changes: 0 additions & 15 deletions trunk/include/sound/pxa2xx-lib.h
Original file line number Diff line number Diff line change
Expand Up @@ -42,19 +42,4 @@ extern int pxa2xx_ac97_hw_resume(void);
extern int pxa2xx_ac97_hw_probe(struct platform_device *dev);
extern void pxa2xx_ac97_hw_remove(struct platform_device *dev);

/* AC97 platform_data */
/**
* struct pxa2xx_ac97_platform_data - pxa ac97 platform data
* @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
* a -1 value means no gpio will be used for reset
*
* Platform data should only be specified for pxa27x CPUs where a silicon bug
* prevents correct operation of the reset line. If not specified, the default
* behaviour is to consider gpio 113 as the AC97 reset line, which is the
* default on most boards.
*/
struct pxa2xx_ac97_platform_data {
int reset_gpio;
};

#endif
71 changes: 5 additions & 66 deletions trunk/sound/arm/pxa2xx-ac97-lib.c
Original file line number Diff line number Diff line change
Expand Up @@ -31,7 +31,6 @@ static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
static volatile long gsr_bits;
static struct clk *ac97_clk;
static struct clk *ac97conf_clk;
static int reset_gpio;

/*
* Beware PXA27x bugs:
Expand All @@ -43,45 +42,6 @@ static int reset_gpio;
* 1 jiffy timeout if interrupt never comes).
*/

enum {
RESETGPIO_FORCE_HIGH,
RESETGPIO_FORCE_LOW,
RESETGPIO_NORMAL_ALTFUNC
};

/**
* set_resetgpio_mode - computes and sets the AC97_RESET gpio mode on PXA
* @mode: chosen action
*
* As the PXA27x CPUs suffer from a AC97 bug, a manual control of the reset line
* must be done to insure proper work of AC97 reset line. This function
* computes the correct gpio_mode for further use by reset functions, and
* applied the change through pxa_gpio_mode.
*/
static void set_resetgpio_mode(int resetgpio_action)
{
int mode = 0;

if (reset_gpio)
switch (resetgpio_action) {
case RESETGPIO_NORMAL_ALTFUNC:
if (reset_gpio == 113)
mode = 113 | GPIO_OUT | GPIO_DFLT_LOW;
if (reset_gpio == 95)
mode = 95 | GPIO_ALT_FN_1_OUT;
break;
case RESETGPIO_FORCE_LOW:
mode = reset_gpio | GPIO_OUT | GPIO_DFLT_LOW;
break;
case RESETGPIO_FORCE_HIGH:
mode = reset_gpio | GPIO_OUT | GPIO_DFLT_HIGH;
break;
};

if (mode)
pxa_gpio_mode(mode);
}

unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
{
unsigned short val = -1;
Expand Down Expand Up @@ -177,10 +137,10 @@ static inline void pxa_ac97_warm_pxa27x(void)

/* warm reset broken on Bulverde,
so manually keep AC97 reset high */
set_resetgpio_mode(RESETGPIO_FORCE_HIGH);
pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH);
udelay(10);
GCR |= GCR_WARM_RST;
set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
udelay(500);
}

Expand Down Expand Up @@ -348,8 +308,8 @@ int pxa2xx_ac97_hw_resume(void)
pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
}
if (cpu_is_pxa27x()) {
/* Use GPIO 113 or 95 as AC97 Reset on Bulverde */
set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
/* Use GPIO 113 as AC97 Reset on Bulverde */
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
}
clk_enable(ac97_clk);
return 0;
Expand All @@ -360,27 +320,6 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume);
int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
{
int ret;
struct pxa2xx_ac97_platform_data *pdata = dev->dev.platform_data;

if (pdata) {
switch (pdata->reset_gpio) {
case 95:
case 113:
reset_gpio = pdata->reset_gpio;
break;
case 0:
reset_gpio = 113;
break;
case -1:
break;
default:
dev_err(dev, "Invalid reset GPIO %d\n",
pdata->reset_gpio);
}
} else {
if (cpu_is_pxa27x())
reset_gpio = 113;
}

if (cpu_is_pxa25x() || cpu_is_pxa27x()) {
pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
Expand All @@ -391,7 +330,7 @@ int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)

if (cpu_is_pxa27x()) {
/* Use GPIO 113 as AC97 Reset on Bulverde */
set_resetgpio_mode(RESETGPIO_NORMAL_ALTFUNC);
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK");
if (IS_ERR(ac97conf_clk)) {
ret = PTR_ERR(ac97conf_clk);
Expand Down
12 changes: 5 additions & 7 deletions trunk/sound/soc/codecs/twl4030.c
Original file line number Diff line number Diff line change
Expand Up @@ -1383,12 +1383,6 @@ static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai,
#define TWL4030_RATES (SNDRV_PCM_RATE_8000_48000)
#define TWL4030_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FORMAT_S24_LE)

static struct snd_soc_dai_ops twl4030_dai_ops = {
.hw_params = twl4030_hw_params,
.set_sysclk = twl4030_set_dai_sysclk,
.set_fmt = twl4030_set_dai_fmt,
};

struct snd_soc_dai twl4030_dai = {
.name = "twl4030",
.playback = {
Expand All @@ -1403,7 +1397,11 @@ struct snd_soc_dai twl4030_dai = {
.channels_max = 2,
.rates = TWL4030_RATES,
.formats = TWL4030_FORMATS,},
.ops = &twl4030_dai_ops,
.ops = {
.hw_params = twl4030_hw_params,
.set_sysclk = twl4030_set_dai_sysclk,
.set_fmt = twl4030_set_dai_fmt,
}
};
EXPORT_SYMBOL_GPL(twl4030_dai);

Expand Down
44 changes: 33 additions & 11 deletions trunk/sound/soc/pxa/pxa-ssp.c
Original file line number Diff line number Diff line change
Expand Up @@ -558,18 +558,17 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,

switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
sscr0 |= SSCR0_MOD | SSCR0_PSP;
sscr0 |= SSCR0_PSP;
sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;

switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
sspsp |= SSPSP_FSRT;
break;
case SND_SOC_DAIFMT_NB_IF:
sspsp |= SSPSP_SFRMP | SSPSP_FSRT;
sspsp |= SSPSP_SFRMP;
break;
case SND_SOC_DAIFMT_IB_IF:
sspsp |= SSPSP_SFRMP;
sspsp |= SSPSP_SFRMP | SSPSP_SCMODE(3);
break;
default:
return -EINVAL;
Expand Down Expand Up @@ -655,33 +654,56 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
sscr0 |= SSCR0_FPCKE;
#endif
sscr0 |= SSCR0_DataSize(16);
/* use network mode (2 slots) for 16 bit stereo */
break;
case SNDRV_PCM_FORMAT_S24_LE:
sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8));
/* we must be in network mode (2 slots) for 24 bit stereo */
break;
case SNDRV_PCM_FORMAT_S32_LE:
sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16));
/* we must be in network mode (2 slots) for 32 bit stereo */
break;
}
ssp_write_reg(ssp, SSCR0, sscr0);

switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
/* Cleared when the DAI format is set */
sspsp = ssp_read_reg(ssp, SSPSP) | SSPSP_SFRMWDTH(width);
sspsp = ssp_read_reg(ssp, SSPSP);

if (((sscr0 & SSCR0_SCR) == SSCR0_SerClkDiv(4)) &&
(width == 16)) {
/* This is a special case where the bitclk is 64fs
* and we're not dealing with 2*32 bits of audio
* samples.
*
* The SSP values used for that are all found out by
* trying and failing a lot; some of the registers
* needed for that mode are only available on PXA3xx.
*/

#ifdef CONFIG_PXA3xx
if (!cpu_is_pxa3xx())
return -EINVAL;

sspsp |= SSPSP_SFRMWDTH(width * 2);
sspsp |= SSPSP_SFRMDLY(width * 4);
sspsp |= SSPSP_EDMYSTOP(3);
sspsp |= SSPSP_DMYSTOP(3);
sspsp |= SSPSP_DMYSTRT(1);
#else
return -EINVAL;
#endif
} else
sspsp |= SSPSP_SFRMWDTH(width);

ssp_write_reg(ssp, SSPSP, sspsp);
break;
default:
break;
}

/* We always use a network mode so we always require TDM slots
/* When we use a network mode, we always require TDM slots
* - complain loudly and fail if they've not been set up yet.
*/
if (!(ssp_read_reg(ssp, SSTSA) & 0xf)) {
if ((sscr0 & SSCR0_MOD) && !(ssp_read_reg(ssp, SSTSA) & 0xf)) {
dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n");
return -EINVAL;
}
Expand Down
16 changes: 4 additions & 12 deletions trunk/sound/soc/pxa/pxa2xx-ac97.c
Original file line number Diff line number Diff line change
Expand Up @@ -164,18 +164,10 @@ static int pxa2xx_ac97_hw_mic_params(struct snd_pcm_substream *substream,
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
SNDRV_PCM_RATE_48000)

static struct snd_soc_dai_ops pxa_ac97_hifi_dai_ops = {
static struct snd_soc_dai_ops pxa_ac97_dai_ops = {
.hw_params = pxa2xx_ac97_hw_params,
};

static struct snd_soc_dai_ops pxa_ac97_aux_dai_ops = {
.hw_params = pxa2xx_ac97_hw_aux_params,
};

static struct snd_soc_dai_ops pxa_ac97_mic_dai_ops = {
.hw_params = pxa2xx_ac97_hw_mic_params,
};

/*
* There is only 1 physical AC97 interface for pxa2xx, but it
* has extra fifo's that can be used for aux DACs and ADCs.
Expand All @@ -201,7 +193,7 @@ struct snd_soc_dai pxa_ac97_dai[] = {
.channels_max = 2,
.rates = PXA2XX_AC97_RATES,
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
.ops = &pxa_ac97_hifi_dai_ops,
.ops = &pxa_ac97_dai_ops,
},
{
.name = "pxa2xx-ac97-aux",
Expand All @@ -219,7 +211,7 @@ struct snd_soc_dai pxa_ac97_dai[] = {
.channels_max = 1,
.rates = PXA2XX_AC97_RATES,
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
.ops = &pxa_ac97_aux_dai_ops,
.ops = &pxa_ac97_dai_ops,
},
{
.name = "pxa2xx-ac97-mic",
Expand All @@ -231,7 +223,7 @@ struct snd_soc_dai pxa_ac97_dai[] = {
.channels_max = 1,
.rates = PXA2XX_AC97_RATES,
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
.ops = &pxa_ac97_mic_dai_ops,
.ops = &pxa_ac97_dai_ops,
},
};

Expand Down
8 changes: 3 additions & 5 deletions trunk/sound/soc/s3c24xx/s3c64xx-i2s.c
Original file line number Diff line number Diff line change
Expand Up @@ -177,10 +177,6 @@ static int s3c64xx_i2s_probe(struct platform_device *pdev,
#define S3C64XX_I2S_FMTS \
(SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE)

static struct snd_soc_dai_ops s3c64xx_i2s_dai_ops = {
.set_sysclk = s3c64xx_i2s_set_sysclk,
};

struct snd_soc_dai s3c64xx_i2s_dai = {
.name = "s3c64xx-i2s",
.id = 0,
Expand All @@ -197,7 +193,9 @@ struct snd_soc_dai s3c64xx_i2s_dai = {
.rates = S3C64XX_I2S_RATES,
.formats = S3C64XX_I2S_FMTS,
},
.ops = &s3c64xx_i2s_dai_ops,
.ops = {
.set_sysclk = s3c64xx_i2s_set_sysclk,
},
};
EXPORT_SYMBOL_GPL(s3c64xx_i2s_dai);

Expand Down
12 changes: 6 additions & 6 deletions trunk/sound/soc/sh/hac.c
Original file line number Diff line number Diff line change
Expand Up @@ -267,10 +267,6 @@ static int hac_hw_params(struct snd_pcm_substream *substream,
#define AC97_FMTS \
SNDRV_PCM_FMTBIT_S16_LE

static struct snd_soc_dai_ops hac_dai_ops = {
.hw_params = hac_hw_params,
};

struct snd_soc_dai sh4_hac_dai[] = {
{
.name = "HAC0",
Expand All @@ -288,7 +284,9 @@ struct snd_soc_dai sh4_hac_dai[] = {
.channels_min = 2,
.channels_max = 2,
},
.ops = &hac_dai_ops,
.ops = {
.hw_params = hac_hw_params,
},
},
#ifdef CONFIG_CPU_SUBTYPE_SH7760
{
Expand All @@ -307,7 +305,9 @@ struct snd_soc_dai sh4_hac_dai[] = {
.channels_min = 2,
.channels_max = 2,
},
.ops = &hac_dai_ops,
.ops = {
.hw_params = hac_hw_params,
},

},
#endif
Expand Down
3 changes: 1 addition & 2 deletions trunk/sound/soc/soc-core.c
Original file line number Diff line number Diff line change
Expand Up @@ -1432,8 +1432,7 @@ void snd_soc_free_pcms(struct snd_soc_device *socdev)
#ifdef CONFIG_SND_SOC_AC97_BUS
for (i = 0; i < codec->num_dai; i++) {
codec_dai = &codec->dai[i];
if (codec_dai->ac97_control && codec->ac97 &&
strcmp(codec->name, "AC97") != 0) {
if (codec_dai->ac97_control && codec->ac97) {
soc_ac97_dev_unregister(codec);
goto free_card;
}
Expand Down

0 comments on commit a9cdb4d

Please sign in to comment.