---

yaml
---
r: 369601
b: refs/heads/master
c: 0d528d8
h: refs/heads/master
i:
  369599: 960a7df
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 5de17984898c5758fc6ebe08eccea9f4b6548914
+refs/heads/master: 0d528d85c519b755b6f4e1bafa3a39984370e1c1

trunk/include/net/mac80211.h

@@ -563,6 +563,9 @@ enum mac80211_rate_control_flags {
 /* maximum number of rate stages */
 #define IEEE80211_TX_MAX_RATES	4
 
+/* maximum number of rate table entries */
+#define IEEE80211_TX_RATE_TABLE_SIZE	4
+
 /**
  * struct ieee80211_tx_rate - rate selection/status
  *
@@ -659,6 +662,8 @@ struct ieee80211_tx_info {
 					s8 rts_cts_rate_idx;
 					u8 use_rts:1;
 					u8 use_cts_prot:1;
+					u8 short_preamble:1;
+					u8 skip_table:1;
 					/* 2 bytes free */
 				};
 				/* only needed before rate control */
@@ -680,6 +685,8 @@ struct ieee80211_tx_info {
 		struct {
 			struct ieee80211_tx_rate driver_rates[
 				IEEE80211_TX_MAX_RATES];
+			u8 pad[4];
+
 			void *rate_driver_data[
 				IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)];
 		};
@@ -1224,6 +1231,24 @@ enum ieee80211_sta_rx_bandwidth {
 	IEEE80211_STA_RX_BW_160,
 };
 
+/**
+ * struct ieee80211_sta_rates - station rate selection table
+ *
+ * @rcu_head: RCU head used for freeing the table on update
+ * @rates: transmit rates/flags to be used by default.
+ *	Overriding entries per-packet is possible by using cb tx control.
+ */
+struct ieee80211_sta_rates {
+	struct rcu_head rcu_head;
+	struct {
+		s8 idx;
+		u8 count;
+		u8 count_cts;
+		u8 count_rts;
+		u16 flags;
+	} rate[IEEE80211_TX_RATE_TABLE_SIZE];
+};
+
 /**
  * struct ieee80211_sta - station table entry
  *
@@ -1251,6 +1276,7 @@ enum ieee80211_sta_rx_bandwidth {
  *	notifications and capabilities. The value is only valid after
  *	the station moves to associated state.
  * @smps_mode: current SMPS mode (off, static or dynamic)
+ * @tx_rates: rate control selection table
  */
 struct ieee80211_sta {
 	u32 supp_rates[IEEE80211_NUM_BANDS];
@@ -1264,6 +1290,7 @@ struct ieee80211_sta {
 	u8 rx_nss;
 	enum ieee80211_sta_rx_bandwidth bandwidth;
 	enum ieee80211_smps_mode smps_mode;
+	struct ieee80211_sta_rates __rcu *rates;
 
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
@@ -1419,6 +1446,9 @@ struct ieee80211_tx_control {
  *	for different virtual interfaces. See the doc section on HW queue
  *	control for more details.
  *
+ * @IEEE80211_HW_SUPPORTS_RC_TABLE: The driver supports using a rate
+ *	selection table provided by the rate control algorithm.
+ *
  * @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any
  *	P2P Interface. This will be honoured even if more than one interface
  *	is supported.
@@ -1451,6 +1481,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_SUPPORTS_PER_STA_GTK		= 1<<21,
 	IEEE80211_HW_AP_LINK_PS				= 1<<22,
 	IEEE80211_HW_TX_AMPDU_SETUP_IN_HW		= 1<<23,
+	IEEE80211_HW_SUPPORTS_RC_TABLE			= 1<<24,
 	IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF		= 1<<25,
 	IEEE80211_HW_TIMING_BEACON_ONLY			= 1<<26,
 };
@@ -3136,6 +3167,25 @@ static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta,
 void ieee80211_sta_set_buffered(struct ieee80211_sta *sta,
 				u8 tid, bool buffered);
 
+/**
+ * ieee80211_get_tx_rates - get the selected transmit rates for a packet
+ *
+ * Call this function in a driver with per-packet rate selection support
+ * to combine the rate info in the packet tx info with the most recent
+ * rate selection table for the station entry.
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @sta: the receiver station to which this packet is sent.
+ * @skb: the frame to be transmitted.
+ * @dest: buffer for extracted rate/retry information
+ * @max_rates: maximum number of rates to fetch
+ */
+void ieee80211_get_tx_rates(struct ieee80211_vif *vif,
+			    struct ieee80211_sta *sta,
+			    struct sk_buff *skb,
+			    struct ieee80211_tx_rate *dest,
+			    int max_rates);
+
 /**
  * ieee80211_tx_status - transmit status callback
  *
@@ -4212,6 +4262,22 @@ bool rate_usable_index_exists(struct ieee80211_supported_band *sband,
 	return false;
 }
 
+/**
+ * rate_control_set_rates - pass the sta rate selection to mac80211/driver
+ *
+ * When not doing a rate control probe to test rates, rate control should pass
+ * its rate selection to mac80211. If the driver supports receiving a station
+ * rate table, it will use it to ensure that frames are always sent based on
+ * the most recent rate control module decision.
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @pubsta: &struct ieee80211_sta pointer to the target destination.
+ * @rates: new tx rate set to be used for this station.
+ */
+int rate_control_set_rates(struct ieee80211_hw *hw,
+			   struct ieee80211_sta *pubsta,
+			   struct ieee80211_sta_rates *rates);
+
 int ieee80211_rate_control_register(struct rate_control_ops *ops);
 void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
 

trunk/net/mac80211/ieee80211_i.h

@@ -156,6 +156,7 @@ struct ieee80211_tx_data {
 	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta;
 	struct ieee80211_key *key;
+	struct ieee80211_tx_rate rate;
 
 	unsigned int flags;
 };