Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (29 commits)
  ahci: add another PCI ID for marvell
  libata: Use 'bool' return value for ata_id_XXX
  sata_fsl: Update RX_WATER_MARK for TRANSCFG
  sata_fsl: Fix wrong Device Error Register usage
  libata: Include WWN ID in inquiry VPD emulation
  ata/pata_arasan_cf: fill dma chan->private from pdata->dma_priv
  ata: pata: Convert pr_*(DRV_NAME ...) to pr_fmt/pr_<level>
  pata_arasan_cf: fix printk format string warning
  pata_arasan_cf: Adding support for arasan compact flash host controller
  libata-sff: add ata_sff_queue_work() & ata_sff_queue_delayed_work()
  ahci: AHCI mode SATA patch for Intel Patsburg SATA RAID controller
  ahci: recognize Marvell 88se9125 PCIe SATA 6.0 Gb/s controller
  libata: remove ATA_FLAG_LPM
  libata: remove ATA_FLAG_NO_LEGACY
  libata: remove ATA_FLAG_MMIO
  libata: remove ATA_FLAG_{SRST|SATA_RESET}
  ipr/sas_ata: use mode mask macros from <linux/ata.h>
  sata_dwc_460ex: add debugging options
  sata_dwc_460ex: fix misuse of ata_get_cmd_descript()
  sata_dwc_460ex: fix return value of dma_dwc_xfer_setup()
  ...

MAINTAINERS

@@ -557,6 +557,13 @@ S:	Maintained
 F:	drivers/net/appletalk/
 F:	net/appletalk/
 
+ARASAN COMPACT FLASH PATA CONTROLLER
+M:	Viresh Kumar <viresh.kumar@st.com>
+L:	linux-ide@vger.kernel.org
+S:	Maintained
+F:	include/linux/pata_arasan_cf_data.h
+F:	drivers/ata/pata_arasan_cf.c
+
 ARC FRAMEBUFFER DRIVER
 M:	Jaya Kumar <jayalk@intworks.biz>
 S:	Maintained

drivers/ata/Kconfig

@@ -202,6 +202,18 @@ config SATA_DWC
 
 	  If unsure, say N.
 
+config SATA_DWC_DEBUG
+	bool "Debugging driver version"
+	depends on SATA_DWC
+	help
+	  This option enables debugging output in the driver.
+
+config SATA_DWC_VDEBUG
+	bool "Verbose debug output"
+	depends on SATA_DWC_DEBUG
+	help
+	  This option enables the taskfile dumping and NCQ debugging.
+
 config SATA_MV
 	tristate "Marvell SATA support"
 	help
@@ -299,6 +311,12 @@ config PATA_AMD
 
 	  If unsure, say N.
 
+config PATA_ARASAN_CF
+	tristate "ARASAN CompactFlash PATA Controller Support"
+	select DMA_ENGINE
+	help
+	  Say Y here to support the ARASAN CompactFlash PATA controller
+
 config PATA_ARTOP
 	tristate "ARTOP 6210/6260 PATA support"
 	depends on PCI

drivers/ata/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
 
 # SFF w/ custom DMA
 obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
+obj-$(CONFIG_PATA_ARASAN_CF)	+= pata_arasan_cf.o
 obj-$(CONFIG_PATA_OCTEON_CF)	+= pata_octeon_cf.o
 obj-$(CONFIG_SATA_QSTOR)	+= sata_qstor.o
 obj-$(CONFIG_SATA_SX4)		+= sata_sx4.o

drivers/ata/ahci.c

@@ -175,8 +175,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
 				 AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
-		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
@@ -260,6 +259,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x1d02), board_ahci }, /* PBG AHCI */
 	{ PCI_VDEVICE(INTEL, 0x1d04), board_ahci }, /* PBG RAID */
 	{ PCI_VDEVICE(INTEL, 0x1d06), board_ahci }, /* PBG RAID */
+	{ PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* PBG RAID */
 	{ PCI_VDEVICE(INTEL, 0x2323), board_ahci }, /* DH89xxCC AHCI */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
@@ -383,6 +383,10 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  .class = PCI_CLASS_STORAGE_SATA_AHCI,
 	  .class_mask = 0xffffff,
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9128 */
+	{ PCI_DEVICE(0x1b4b, 0x9125),
+	  .driver_data = board_ahci_yes_fbs },			/* 88se9125 */
+	{ PCI_DEVICE(0x1b4b, 0x91a3),
+	  .driver_data = board_ahci_yes_fbs },
 
 	/* Promise */
 	{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },	/* PDC42819 */

drivers/ata/ahci.h

@@ -213,10 +213,8 @@ enum {
 
 	/* ap->flags bits */
 
-	AHCI_FLAG_COMMON		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-					  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-					  ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
-					  ATA_FLAG_LPM,
+	AHCI_FLAG_COMMON		= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA |
+					  ATA_FLAG_ACPI_SATA | ATA_FLAG_AN,
 
 	ICH_MAP				= 0x90, /* ICH MAP register */
 

drivers/ata/ata_generic.c

@@ -237,7 +237,7 @@ static struct pci_device_id ata_generic[] = {
 #endif
 	/* Intel, IDE class device */
 	{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	  PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 
+	  PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL,
 	  .driver_data = ATA_GEN_INTEL_IDER },
 	/* Must come last. If you add entries adjust this table appropriately */
 	{ PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL),

drivers/ata/ata_piix.c

@@ -230,7 +230,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	{ 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 
 	/* SATA ports */
-	
+
 	/* 82801EB (ICH5) */
 	{ 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
 	/* 82801EB (ICH5) */

drivers/ata/libata-acpi.c

@@ -660,8 +660,7 @@ static int ata_acpi_filter_tf(struct ata_device *dev,
  * @dev: target ATA device
  * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
  *
- * Outputs ATA taskfile to standard ATA host controller using MMIO
- * or PIO as indicated by the ATA_FLAG_MMIO flag.
+ * Outputs ATA taskfile to standard ATA host controller.
  * Writes the control, feature, nsect, lbal, lbam, and lbah registers.
  * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
  * hob_lbal, hob_lbam, and hob_lbah.

drivers/ata/libata-core.c

@@ -4210,7 +4210,7 @@ static int glob_match (const char *text, const char *pattern)
 		return 0;  /* End of both strings: match */
 	return 1;  /* No match */
 }
- 
+
 static unsigned long ata_dev_blacklisted(const struct ata_device *dev)
 {
 	unsigned char model_num[ATA_ID_PROD_LEN + 1];
@@ -5479,7 +5479,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
 	ap = kzalloc(sizeof(*ap), GFP_KERNEL);
 	if (!ap)
 		return NULL;
-	
+
 	ap->pflags |= ATA_PFLAG_INITIALIZING;
 	ap->lock = &host->lock;
 	ap->print_id = -1;
@@ -5887,21 +5887,9 @@ void ata_host_init(struct ata_host *host, struct device *dev,
 	host->ops = ops;
 }
 
-
-static void async_port_probe(void *data, async_cookie_t cookie)
+int ata_port_probe(struct ata_port *ap)
 {
-	int rc;
-	struct ata_port *ap = data;
-
-	/*
-	 * If we're not allowed to scan this host in parallel,
-	 * we need to wait until all previous scans have completed
-	 * before going further.
-	 * Jeff Garzik says this is only within a controller, so we
-	 * don't need to wait for port 0, only for later ports.
-	 */
-	if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN) && ap->port_no != 0)
-		async_synchronize_cookie(cookie);
+	int rc = 0;
 
 	/* probe */
 	if (ap->ops->error_handler) {
@@ -5927,23 +5915,33 @@ static void async_port_probe(void *data, async_cookie_t cookie)
 		DPRINTK("ata%u: bus probe begin\n", ap->print_id);
 		rc = ata_bus_probe(ap);
 		DPRINTK("ata%u: bus probe end\n", ap->print_id);
-
-		if (rc) {
-			/* FIXME: do something useful here?
-			 * Current libata behavior will
-			 * tear down everything when
-			 * the module is removed
-			 * or the h/w is unplugged.
-			 */
-		}
 	}
+	return rc;
+}
+
+
+static void async_port_probe(void *data, async_cookie_t cookie)
+{
+	struct ata_port *ap = data;
+
+	/*
+	 * If we're not allowed to scan this host in parallel,
+	 * we need to wait until all previous scans have completed
+	 * before going further.
+	 * Jeff Garzik says this is only within a controller, so we
+	 * don't need to wait for port 0, only for later ports.
+	 */
+	if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN) && ap->port_no != 0)
+		async_synchronize_cookie(cookie);
+
+	(void)ata_port_probe(ap);
 
 	/* in order to keep device order, we need to synchronize at this point */
 	async_synchronize_cookie(cookie);
 
 	ata_scsi_scan_host(ap, 1);
-
 }
+
 /**
  *	ata_host_register - register initialized ATA host
  *	@host: ATA host to register
@@ -5983,7 +5981,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 	for (i = 0; i < host->n_ports; i++)
 		host->ports[i]->print_id = ata_print_id++;
 
-	
+
 	/* Create associated sysfs transport objects  */
 	for (i = 0; i < host->n_ports; i++) {
 		rc = ata_tport_add(host->dev,host->ports[i]);
@@ -6471,7 +6469,7 @@ static int __init ata_init(void)
 		ata_sff_exit();
 		rc = -ENOMEM;
 		goto err_out;
-	}		
+	}
 
 	printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
 	return 0;

drivers/ata/libata-eh.c

@@ -587,11 +587,43 @@ static void ata_eh_unload(struct ata_port *ap)
 void ata_scsi_error(struct Scsi_Host *host)
 {
 	struct ata_port *ap = ata_shost_to_port(host);
-	int i;
 	unsigned long flags;
+	LIST_HEAD(eh_work_q);
 
 	DPRINTK("ENTER\n");
 
+	spin_lock_irqsave(host->host_lock, flags);
+	list_splice_init(&host->eh_cmd_q, &eh_work_q);
+	spin_unlock_irqrestore(host->host_lock, flags);
+
+	ata_scsi_cmd_error_handler(host, ap, &eh_work_q);
+
+	/* If we timed raced normal completion and there is nothing to
+	   recover nr_timedout == 0 why exactly are we doing error recovery ? */
+	ata_scsi_port_error_handler(host, ap);
+
+	/* finish or retry handled scmd's and clean up */
+	WARN_ON(host->host_failed || !list_empty(&eh_work_q));
+
+	DPRINTK("EXIT\n");
+}
+
+/**
+ * ata_scsi_cmd_error_handler - error callback for a list of commands
+ * @host:	scsi host containing the port
+ * @ap:		ATA port within the host
+ * @eh_work_q:	list of commands to process
+ *
+ * process the given list of commands and return those finished to the
+ * ap->eh_done_q.  This function is the first part of the libata error
+ * handler which processes a given list of failed commands.
+ */
+void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap,
+				struct list_head *eh_work_q)
+{
+	int i;
+	unsigned long flags;
+
 	/* make sure sff pio task is not running */
 	ata_sff_flush_pio_task(ap);
 
@@ -627,7 +659,7 @@ void ata_scsi_error(struct Scsi_Host *host)
 		if (ap->ops->lost_interrupt)
 			ap->ops->lost_interrupt(ap);
 
-		list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) {
+		list_for_each_entry_safe(scmd, tmp, eh_work_q, eh_entry) {
 			struct ata_queued_cmd *qc;
 
 			for (i = 0; i < ATA_MAX_QUEUE; i++) {
@@ -671,8 +703,20 @@ void ata_scsi_error(struct Scsi_Host *host)
 	} else
 		spin_unlock_wait(ap->lock);
 
-	/* If we timed raced normal completion and there is nothing to
-	   recover nr_timedout == 0 why exactly are we doing error recovery ? */
+}
+EXPORT_SYMBOL(ata_scsi_cmd_error_handler);
+
+/**
+ * ata_scsi_port_error_handler - recover the port after the commands
+ * @host:	SCSI host containing the port
+ * @ap:		the ATA port
+ *
+ * Handle the recovery of the port @ap after all the commands
+ * have been recovered.
+ */
+void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
+{
+	unsigned long flags;
 
 	/* invoke error handler */
 	if (ap->ops->error_handler) {
@@ -761,9 +805,6 @@ void ata_scsi_error(struct Scsi_Host *host)
 		ap->ops->eng_timeout(ap);
 	}
 
-	/* finish or retry handled scmd's and clean up */
-	WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q));
-
 	scsi_eh_flush_done_q(&ap->eh_done_q);
 
 	/* clean up */
@@ -784,9 +825,8 @@ void ata_scsi_error(struct Scsi_Host *host)
 	wake_up_all(&ap->eh_wait_q);
 
 	spin_unlock_irqrestore(ap->lock, flags);
-
-	DPRINTK("EXIT\n");
 }
+EXPORT_SYMBOL_GPL(ata_scsi_port_error_handler);
 
 /**
  *	ata_port_wait_eh - Wait for the currently pending EH to complete
@@ -1618,7 +1658,7 @@ static void ata_eh_analyze_serror(struct ata_link *link)
 	 * host links.  For disabled PMP links, only N bit is
 	 * considered as X bit is left at 1 for link plugging.
 	 */
-	if (link->lpm_policy != ATA_LPM_MAX_POWER)
+	if (link->lpm_policy > ATA_LPM_MAX_POWER)
 		hotplug_mask = 0;	/* hotplug doesn't work w/ LPM */
 	else if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link))
 		hotplug_mask = SERR_PHYRDY_CHG | SERR_DEV_XCHG;

drivers/ata/libata-scsi.c

@@ -2056,6 +2056,17 @@ static unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf)
 		      ATA_ID_SERNO_LEN);
 	num += ATA_ID_SERNO_LEN;
 
+	if (ata_id_has_wwn(args->id)) {
+		/* SAT defined lu world wide name */
+		/* piv=0, assoc=lu, code_set=binary, designator=NAA */
+		rbuf[num + 0] = 1;
+		rbuf[num + 1] = 3;
+		rbuf[num + 3] = ATA_ID_WWN_LEN;
+		num += 4;
+		ata_id_string(args->id, (unsigned char *) rbuf + num,
+			      ATA_ID_WWN, ATA_ID_WWN_LEN);
+		num += ATA_ID_WWN_LEN;
+	}
 	rbuf[3] = num - 4;    /* page len (assume less than 256 bytes) */
 	return 0;
 }
@@ -3759,7 +3770,7 @@ struct ata_port *ata_sas_port_alloc(struct ata_host *host,
 		return NULL;
 
 	ap->port_no = 0;
-	ap->lock = shost->host_lock;
+	ap->lock = &host->lock;
 	ap->pio_mask = port_info->pio_mask;
 	ap->mwdma_mask = port_info->mwdma_mask;
 	ap->udma_mask = port_info->udma_mask;
@@ -3821,7 +3832,7 @@ int ata_sas_port_init(struct ata_port *ap)
 
 	if (!rc) {
 		ap->print_id = ata_print_id++;
-		rc = ata_bus_probe(ap);
+		rc = ata_port_probe(ap);
 	}
 
 	return rc;