---

yaml
---
r: 253305
b: refs/heads/master
c: 21c13a4
h: refs/heads/master
i:
  253303: 80f15ef
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 3af51ac9c0889a188aaa3defe5134ef97c80d7c5
+refs/heads/master: 21c13a4f7bc185552c4b402b792c3bbb9aa69df0

trunk/Documentation/kernel-parameters.txt

@@ -2598,6 +2598,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 					unlock ejectable media);
 				m = MAX_SECTORS_64 (don't transfer more
 					than 64 sectors = 32 KB at a time);
+				n = INITIAL_READ10 (force a retry of the
+					initial READ(10) command);
 				o = CAPACITY_OK (accept the capacity
 					reported by the device);
 				r = IGNORE_RESIDUE (the device reports

trunk/drivers/usb/storage/transport.c

@@ -819,6 +819,35 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 		}
 	}
 
+	/*
+	 * Some devices don't work or return incorrect data the first
+	 * time they get a READ(10) command, or for the first READ(10)
+	 * after a media change.  If the INITIAL_READ10 flag is set,
+	 * keep track of whether READ(10) commands succeed.  If the
+	 * previous one succeeded and this one failed, set the REDO_READ10
+	 * flag to force a retry.
+	 */
+	if (unlikely((us->fflags & US_FL_INITIAL_READ10) &&
+			srb->cmnd[0] == READ_10)) {
+		if (srb->result == SAM_STAT_GOOD) {
+			set_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+		} else if (test_bit(US_FLIDX_READ10_WORKED, &us->dflags)) {
+			clear_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+			set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+		}
+
+		/*
+		 * Next, if the REDO_READ10 flag is set, return a result
+		 * code that will cause the SCSI core to retry the READ(10)
+		 * command immediately.
+		 */
+		if (test_bit(US_FLIDX_REDO_READ10, &us->dflags)) {
+			clear_bit(US_FLIDX_REDO_READ10, &us->dflags);
+			srb->result = DID_IMM_RETRY << 16;
+			srb->sense_buffer[0] = 0;
+		}
+	}
+
 	/* Did we transfer less than the minimum amount required? */
 	if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) &&
 			scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow)

trunk/drivers/usb/storage/unusual_devs.h

@@ -1114,6 +1114,16 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Paul Hartman <paul.hartman+linux@gmail.com>
+ * This card reader returns "Illegal Request, Logical Block Address
+ * Out of Range" for the first READ(10) after a new card is inserted.
+ */
+UNUSUAL_DEV(  0x090c, 0x6000, 0x0100, 0x0100,
+		"Feiya",
+		"SD/SDHC Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_INITIAL_READ10 ),
+
 /* This Pentax still camera is not conformant
  * to the USB storage specification: -
  * - It does not like the INQUIRY command. So we must handle this command
@@ -1888,6 +1898,15 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_READ_DISC_INFO ),
 
+/* Reported by Sven Geggus <sven-usbst@geggus.net>
+ * This encrypted pen drive returns bogus data for the initial READ(10).
+ */
+UNUSUAL_DEV(  0x1b1c, 0x1ab5, 0x0200, 0x0200,
+		"Corsair",
+		"Padlock v2",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_INITIAL_READ10 ),
+
 /* Patch by Richard Schütz <r.schtz@t-online.de>
  * This external hard drive enclosure uses a JMicron chip which
  * needs the US_FL_IGNORE_RESIDUE flag to work properly. */

trunk/drivers/usb/storage/usb.c

@@ -440,7 +440,8 @@ static void adjust_quirks(struct us_data *us)
 			US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
 			US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
 			US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
-			US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16);
+			US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
+			US_FL_INITIAL_READ10);
 
 	p = quirks;
 	while (*p) {
@@ -490,6 +491,9 @@ static void adjust_quirks(struct us_data *us)
 		case 'm':
 			f |= US_FL_MAX_SECTORS_64;
 			break;
+		case 'n':
+			f |= US_FL_INITIAL_READ10;
+			break;
 		case 'o':
 			f |= US_FL_CAPACITY_OK;
 			break;
@@ -953,6 +957,13 @@ int usb_stor_probe2(struct us_data *us)
 	if (result)
 		goto BadDevice;
 
+	/*
+	 * If the device returns invalid data for the first READ(10)
+	 * command, indicate the command should be retried.
+	 */
+	if (us->fflags & US_FL_INITIAL_READ10)
+		set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+
 	/* Acquire all the other resources and add the host */
 	result = usb_stor_acquire_resources(us);
 	if (result)

trunk/drivers/usb/storage/usb.h

@@ -73,6 +73,8 @@ struct us_unusual_dev {
 #define US_FLIDX_RESETTING	4	/* device reset in progress */
 #define US_FLIDX_TIMED_OUT	5	/* SCSI midlayer timed out  */
 #define US_FLIDX_DONT_SCAN	6	/* don't scan (disconnect)  */
+#define US_FLIDX_REDO_READ10	7	/* redo READ(10) command    */
+#define US_FLIDX_READ10_WORKED	8	/* previous READ(10) succeeded */
 
 #define USB_STOR_STRING_LEN 32
 

trunk/include/linux/usb_usual.h

@@ -62,7 +62,9 @@
 	US_FLAG(NO_READ_DISC_INFO,	0x00040000)		\
 		/* cannot handle READ_DISC_INFO */		\
 	US_FLAG(NO_READ_CAPACITY_16,	0x00080000)		\
-		/* cannot handle READ_CAPACITY_16 */
+		/* cannot handle READ_CAPACITY_16 */		\
+	US_FLAG(INITIAL_READ10,	0x00100000)			\
+		/* Initial READ(10) (and others) must be retried */
 
 #define US_FLAG(name, value)	US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };