Merge tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The major thing here is the addition of some helpers to factor code
  out of drivers, making a fair proportion of regulators much more just
  data rather than code which is nice.

  - Helpers in the core for regulators using regmap, providing generic
    implementations of the enable and voltage selection operations which
    just need data to describe them in the drivers.
  - Split out voltage mapping and voltage setting, allowing many more
    drivers to take advantage of the infrastructure for selectors.
  - Loads and loads of cleanups from Axel Lin once again, including many
    changes to take advantage of the above new framework features
  - New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI
    TPS65913, TI TWL6035 and TI TWL6037.

  Some of the registration changes to support the core refactoring
  caused so many conflicts that eventually topic branches were abandoned
  for this release."

* tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (227 commits)
  regulator: tps65910: use of_node of matched regulator being register
  regulator: tps65910: dt: support when "regulators" node found
  regulator: tps65910: add error message in case of failure
  regulator: tps62360: dt: initialize of_node param for regulator register.
  regulator: tps65910: use devm_* for memory allocation
  regulator: tps65910: use small letter for regulator names
  mfd: tpx6586x:  Depend on regulator
  regulator: regulator for Palmas Kconfig
  regulator: regulator driver for Palmas series chips
  regulator: Enable Device Tree for the db8500-prcmu regulator driver
  regulator: db8500-prcmu: Separate regulator registration from probe
  regulator: ab3100: Use regulator_map_voltage_iterate()
  regulator: tps65217: Convert to set_voltage_sel and map_voltage
  regulator: Enable the ab8500 for Device Tree
  regulator: ab8500: Split up probe() into manageable pieces
  regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info
  regulator: max8649: Remove unused check_range() function
  regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_info
  regulator: da9052: Convert to set_voltage_sel and map_voltage
  regulator: max8952: Use devm_kzalloc
  ...

Documentation/devicetree/bindings/regulator/fixed-regulator.txt

@@ -8,6 +8,8 @@ Optional properties:
 - startup-delay-us: startup time in microseconds
 - enable-active-high: Polarity of GPIO is Active high
 If this property is missing, the default assumed is Active low.
+- gpio-open-drain: GPIO is open drain type.
+  If this property is missing then default assumption is false.
 
 Any property defined as part of the core regulator
 binding, defined in regulator.txt, can also be used.
@@ -25,5 +27,6 @@ Example:
 		gpio = <&gpio1 16 0>;
 		startup-delay-us = <70000>;
 		enable-active-high;
-		regulator-boot-on
+		regulator-boot-on;
+		gpio-open-drain;
 	};

Documentation/devicetree/bindings/regulator/tps62360-regulator.txt

@@ -0,0 +1,44 @@
+TPS62360 Voltage regulators
+
+Required properties:
+- compatible: Must be one of the following.
+	"ti,tps62360"
+	"ti,tps62361",
+	"ti,tps62362",
+	"ti,tps62363",
+- reg: I2C slave address
+
+Optional properties:
+- ti,enable-vout-discharge: Enable output discharge. This is boolean value.
+- ti,enable-pull-down: Enable pull down. This is boolean value.
+- ti,vsel0-gpio: GPIO for controlling VSEL0 line.
+  If this property is missing, then assume that there is no GPIO
+  for vsel0 control.
+- ti,vsel1-gpio: Gpio for controlling VSEL1 line.
+  If this property is missing, then assume that there is no GPIO
+  for vsel1 control.
+- ti,vsel0-state-high: Inital state of vsel0 input is high.
+  If this property is missing, then assume the state as low (0).
+- ti,vsel1-state-high: Inital state of vsel1 input is high.
+  If this property is missing, then assume the state as low (0).
+
+Any property defined as part of the core regulator binding, defined in
+regulator.txt, can also be used.
+
+Example:
+
+	abc: tps62360 {
+		compatible = "ti,tps62361";
+		reg =  <0x60>;
+		regulator-name = "tps62361-vout";
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-boot-on
+		ti,vsel0-gpio = <&gpio1 16 0>;
+		ti,vsel1-gpio = <&gpio1 17 0>;
+		ti,vsel0-state-high;
+		ti,vsel1-state-high;
+		ti,enable-pull-down;
+		ti,enable-force-pwm;
+		ti,enable-vout-discharge;
+	};

Documentation/devicetree/bindings/regulator/tps6586x.txt

@@ -0,0 +1,97 @@
+TPS6586x family of regulators
+
+Required properties:
+- compatible: "ti,tps6586x"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- #gpio-cells: number of cells to describe a GPIO
+- gpio-controller: mark the device as a GPIO controller
+- regulators: list of regulators provided by this controller, must be named
+  after their hardware counterparts: sm[0-2], ldo[0-9] and ldo_rtc
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	pmu: tps6586x@34 {
+		compatible = "ti,tps6586x";
+		reg = <0x34>;
+		interrupts = <0 88 0x4>;
+
+		#gpio-cells = <2>;
+		gpio-controller;
+
+		regulators {
+			sm0_reg: sm0 {
+				regulator-min-microvolt = < 725000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sm1_reg: sm1 {
+				regulator-min-microvolt = < 725000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sm2_reg: sm2 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <4550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo0_reg: ldo0 {
+				regulator-name = "PCIE CLK";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = < 725000>;
+				regulator-max-microvolt = <1500000>;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = < 725000>;
+				regulator-max-microvolt = <1500000>;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <2475000>;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};

Documentation/power/regulator/regulator.txt

@@ -11,8 +11,7 @@ Registration
 Drivers can register a regulator by calling :-
 
 struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
-	struct device *dev, struct regulator_init_data *init_data,
-	void *driver_data, struct device_node *of_node);
+					 const struct regulator_config *config);
 
 This will register the regulators capabilities and operations to the regulator
 core.

drivers/mfd/Kconfig

@@ -162,6 +162,7 @@ config MFD_TPS6586X
 	bool "TPS6586x Power Management chips"
 	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
 	select MFD_CORE
+	depends on REGULATOR
 	help
 	  If you say yes here you get support for the TPS6586X series of
 	  Power Management chips.

drivers/mfd/tps65090.c

@@ -78,17 +78,6 @@ static struct mfd_cell tps65090s[] = {
 	},
 };
 
-struct tps65090 {
-	struct mutex		lock;
-	struct device		*dev;
-	struct i2c_client	*client;
-	struct regmap		*rmap;
-	struct irq_chip		irq_chip;
-	struct mutex		irq_lock;
-	int			irq_base;
-	unsigned int		id;
-};
-
 int tps65090_write(struct device *dev, int reg, uint8_t val)
 {
 	struct tps65090 *tps = dev_get_drvdata(dev);

drivers/mfd/tps6586x.c

@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
+#include <linux/regulator/of_regulator.h>
 
 #include <linux/mfd/core.h>
 #include <linux/mfd/tps6586x.h>
@@ -460,6 +461,7 @@ static int __devinit tps6586x_add_subdevs(struct tps6586x *tps6586x,
 
 		pdev->dev.parent = tps6586x->dev;
 		pdev->dev.platform_data = subdev->platform_data;
+		pdev->dev.of_node = subdev->of_node;
 
 		ret = platform_device_add(pdev);
 		if (ret) {
@@ -474,13 +476,96 @@ static int __devinit tps6586x_add_subdevs(struct tps6586x *tps6586x,
 	return ret;
 }
 
+#ifdef CONFIG_OF
+static struct of_regulator_match tps6586x_matches[] = {
+	{ .name = "sm0",     .driver_data = (void *)TPS6586X_ID_SM_0    },
+	{ .name = "sm1",     .driver_data = (void *)TPS6586X_ID_SM_1    },
+	{ .name = "sm2",     .driver_data = (void *)TPS6586X_ID_SM_2    },
+	{ .name = "ldo0",    .driver_data = (void *)TPS6586X_ID_LDO_0   },
+	{ .name = "ldo1",    .driver_data = (void *)TPS6586X_ID_LDO_1   },
+	{ .name = "ldo2",    .driver_data = (void *)TPS6586X_ID_LDO_2   },
+	{ .name = "ldo3",    .driver_data = (void *)TPS6586X_ID_LDO_3   },
+	{ .name = "ldo4",    .driver_data = (void *)TPS6586X_ID_LDO_4   },
+	{ .name = "ldo5",    .driver_data = (void *)TPS6586X_ID_LDO_5   },
+	{ .name = "ldo6",    .driver_data = (void *)TPS6586X_ID_LDO_6   },
+	{ .name = "ldo7",    .driver_data = (void *)TPS6586X_ID_LDO_7   },
+	{ .name = "ldo8",    .driver_data = (void *)TPS6586X_ID_LDO_8   },
+	{ .name = "ldo9",    .driver_data = (void *)TPS6586X_ID_LDO_9   },
+	{ .name = "ldo_rtc", .driver_data = (void *)TPS6586X_ID_LDO_RTC },
+};
+
+static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *client)
+{
+	const unsigned int num = ARRAY_SIZE(tps6586x_matches);
+	struct device_node *np = client->dev.of_node;
+	struct tps6586x_platform_data *pdata;
+	struct tps6586x_subdev_info *devs;
+	struct device_node *regs;
+	unsigned int count;
+	unsigned int i, j;
+	int err;
+
+	regs = of_find_node_by_name(np, "regulators");
+	if (!regs)
+		return NULL;
+
+	err = of_regulator_match(&client->dev, regs, tps6586x_matches, num);
+	if (err < 0) {
+		of_node_put(regs);
+		return NULL;
+	}
+
+	of_node_put(regs);
+	count = err;
+
+	devs = devm_kzalloc(&client->dev, count * sizeof(*devs), GFP_KERNEL);
+	if (!devs)
+		return NULL;
+
+	for (i = 0, j = 0; i < num && j < count; i++) {
+		if (!tps6586x_matches[i].init_data)
+			continue;
+
+		devs[j].name = "tps6586x-regulator";
+		devs[j].platform_data = tps6586x_matches[i].init_data;
+		devs[j].id = (int)tps6586x_matches[i].driver_data;
+		devs[j].of_node = tps6586x_matches[i].of_node;
+		j++;
+	}
+
+	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	pdata->num_subdevs = count;
+	pdata->subdevs = devs;
+	pdata->gpio_base = -1;
+	pdata->irq_base = -1;
+
+	return pdata;
+}
+
+static struct of_device_id tps6586x_of_match[] = {
+	{ .compatible = "ti,tps6586x", },
+	{ },
+};
+#else
+static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *client)
+{
+	return NULL;
+}
+#endif
+
 static int __devinit tps6586x_i2c_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
 	struct tps6586x_platform_data *pdata = client->dev.platform_data;
 	struct tps6586x *tps6586x;
 	int ret;
 
+	if (!pdata && client->dev.of_node)
+		pdata = tps6586x_parse_dt(client);
+
 	if (!pdata) {
 		dev_err(&client->dev, "tps6586x requires platform data\n");
 		return -ENOTSUPP;
@@ -573,6 +658,7 @@ static struct i2c_driver tps6586x_driver = {
 	.driver	= {
 		.name	= "tps6586x",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(tps6586x_of_match),
 	},
 	.probe		= tps6586x_i2c_probe,
 	.remove		= __devexit_p(tps6586x_i2c_remove),

drivers/mfd/twl-core.c

@@ -224,13 +224,6 @@
 #define HIGH_PERF_SQ			(1 << 3)
 #define CK32K_LOWPWR_EN			(1 << 7)
 
-
-/* chip-specific feature flags, for i2c_device_id.driver_data */
-#define TWL4030_VAUX2		BIT(0)	/* pre-5030 voltage ranges */
-#define TPS_SUBSET		BIT(1)	/* tps659[23]0 have fewer LDOs */
-#define TWL5031			BIT(2)  /* twl5031 has different registers */
-#define TWL6030_CLASS		BIT(3)	/* TWL6030 class */
-
 /*----------------------------------------------------------------------*/
 
 /* is driver active, bound to a chip? */