Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/linville/wireless-2.6

MAINTAINERS

@@ -2836,8 +2836,6 @@ S:	Maintained
 MAC80211
 P:	Johannes Berg
 M:	johannes@sipsolutions.net
-P:	Michael Wu
-M:	flamingice@sourmilk.net
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git

drivers/net/wireless/ath5k/base.c

@@ -1028,6 +1028,8 @@ ath5k_setup_bands(struct ieee80211_hw *hw)
  * it's done by reseting the chip.  To accomplish this we must
  * first cleanup any pending DMA, then restart stuff after a la
  * ath5k_init.
+ *
+ * Called with sc->lock.
  */
 static int
 ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
@@ -2814,11 +2816,17 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct ath5k_softc *sc = hw->priv;
 	struct ieee80211_conf *conf = &hw->conf;
+	int ret;
+
+	mutex_lock(&sc->lock);
 
 	sc->bintval = conf->beacon_int;
 	sc->power_level = conf->power_level;
 
-	return ath5k_chan_set(sc, conf->channel);
+	ret = ath5k_chan_set(sc, conf->channel);
+
+	mutex_unlock(&sc->lock);
+	return ret;
 }
 
 static int

drivers/net/wireless/iwlwifi/iwl-agn.c

@@ -1719,6 +1719,10 @@ static int iwl_read_ucode(struct iwl_priv *priv)
 	priv->ucode_data_backup.len = data_size;
 	iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
 
+	if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
+	    !priv->ucode_data_backup.v_addr)
+		goto err_pci_alloc;
+
 	/* Initialization instructions and data */
 	if (init_size && init_data_size) {
 		priv->ucode_init.len = init_size;

drivers/net/wireless/rtl818x/rtl8187_rtl8225.c

@@ -285,7 +285,10 @@ static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
 	ofdm_power = priv->channels[channel - 1].hw_value >> 4;
 
 	cck_power = min(cck_power, (u8)11);
-	ofdm_power = min(ofdm_power, (u8)35);
+	if (ofdm_power > (u8)15)
+		ofdm_power = 25;
+	else
+		ofdm_power += 10;
 
 	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
 			 rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
@@ -536,7 +539,10 @@ static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
 	cck_power += priv->txpwr_base & 0xF;
 	cck_power = min(cck_power, (u8)35);
 
-	ofdm_power = min(ofdm_power, (u8)15);
+	if (ofdm_power > (u8)15)
+		ofdm_power = 25;
+	else
+		ofdm_power += 10;
 	ofdm_power += priv->txpwr_base >> 4;
 	ofdm_power = min(ofdm_power, (u8)35);
 

net/wireless/reg.c

@@ -498,6 +498,7 @@ static struct ieee80211_regdomain *country_ie_2_rd(
 	 * calculate the number of reg rules we will need. We will need one
 	 * for each channel subband */
 	while (country_ie_len >= 3) {
+		int end_channel = 0;
 		struct ieee80211_country_ie_triplet *triplet =
 			(struct ieee80211_country_ie_triplet *) country_ie;
 		int cur_sub_max_channel = 0, cur_channel = 0;
@@ -509,9 +510,25 @@ static struct ieee80211_regdomain *country_ie_2_rd(
 			continue;
 		}
 
+		/* 2 GHz */
+		if (triplet->chans.first_channel <= 14)
+			end_channel = triplet->chans.first_channel +
+				triplet->chans.num_channels;
+		else
+			/*
+			 * 5 GHz -- For example in country IEs if the first
+			 * channel given is 36 and the number of channels is 4
+			 * then the individual channel numbers defined for the
+			 * 5 GHz PHY by these parameters are: 36, 40, 44, and 48
+			 * and not 36, 37, 38, 39.
+			 *
+			 * See: http://tinyurl.com/11d-clarification
+			 */
+			end_channel =  triplet->chans.first_channel +
+				(4 * (triplet->chans.num_channels - 1));
+
 		cur_channel = triplet->chans.first_channel;
-		cur_sub_max_channel = ieee80211_channel_to_frequency(
-			cur_channel + triplet->chans.num_channels);
+		cur_sub_max_channel = end_channel;
 
 		/* Basic sanity check */
 		if (cur_sub_max_channel < cur_channel)
@@ -590,15 +607,6 @@ static struct ieee80211_regdomain *country_ie_2_rd(
 			end_channel = triplet->chans.first_channel +
 				triplet->chans.num_channels;
 		else
-			/*
-			 * 5 GHz -- For example in country IEs if the first
-			 * channel given is 36 and the number of channels is 4
-			 * then the individual channel numbers defined for the
-			 * 5 GHz PHY by these parameters are: 36, 40, 44, and 48
-			 * and not 36, 37, 38, 39.
-			 *
-			 * See: http://tinyurl.com/11d-clarification
-			 */
 			end_channel =  triplet->chans.first_channel +
 				(4 * (triplet->chans.num_channels - 1));
 
@@ -1276,7 +1284,7 @@ static void reg_country_ie_process_debug(
 	if (intersected_rd) {
 		printk(KERN_DEBUG "cfg80211: We intersect both of these "
 			"and get:\n");
-		print_regdomain_info(rd);
+		print_regdomain_info(intersected_rd);
 		return;
 	}
 	printk(KERN_DEBUG "cfg80211: Intersection between both failed\n");